World Forum for Harmonization of Vehicle Regulations

World Forum for Harmonization of Vehicle Regulations
World Forum for Harmonization of Vehicle Regulations (WP.29)
Abbreviation WP.29
Formation 1952
Type Working Party
Legal status Active
Head
 RussiaBoris Kisulenko (2004 - present)
Parent organization
 UNECE Inland Transport Committee
Website UNECE Transport - WP29

The World Forum for Harmonization of Vehicle Regulations is a working party (WP.29)[1] of the Inland Transport Division of the United Nations Economic Commission for Europe (UNECE). It is tasked with creating a uniform system of regulations, called UN Regulations, for vehicle design to facilitate international trade.

WP.29 was established on June 1952 as "Working party of experts on technical requirement of vehicles"; the current name was adopted in 2000.

The forum works on regulations covering vehicle safety, environmental protection, energy efficiency and theft-resistance.

1958 Agreement

The core of the Forum's work is based around the "1958 Agreement", formally titled "Agreement concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions" (E/ECE/TRANS/505/Rev.2, amended on 16 October 1995). This forms a legal framework wherein participating countries (contracting parties) agree a common set of technical prescriptions and protocols for type approval of vehicles and components. These were formerly called "UNECE Regulations" or, less formally, "ECE Regulations" in reference to the Economic Commission for Europe. However, since many non-European countries are now contracting parties to the 1958 Agreement, the regulations are officially entitled "UN Regulations".[2][3] Each contracting party's type approvals are recognised by all other contracting parties.

Participating countries

The first signatories to the 1958 Agreement include Italy (March 28), Netherlands (March 30), Germany (June 19), France (June 26), Hungary (June 30), Sweden and Belgium. Originally, the agreement allowed participation of ECE member countries only, but in 1995 the agreement was revised to allow non-ECE members to participate. Current participants include European Union and its member countries, as well non-EU UNECE members such as Norway, Russia, Ukraine, Croatia, Serbia, Belarus, Kazakhstan, Turkey, Azerbaijan and Tunisia, and even remote territories such as South Africa, Australia, New Zealand, Japan, South Korea, Thailand and Malaysia.

As of 2012, the participants to the 1958 Agreement, with their UN country code, were:

UN Code Country Effective date Notes
1  Germany 28 January 1965
2  France 20 June 1959
3  Italy 26 April 1963
4  Netherlands 29 August 1960
5  Sweden 20 June 1959
6  Belgium 5 September 1959
7  Hungary 2 July 1960
8  Czech Republic 1 January 1993 (formerly Czechoslovakia)
9  Spain 10 October 1961
10  Serbia 12 March 2001 (formerly Yugoslavia)
11  United Kingdom 16 March 1963
12  Austria 11 May 1971
13  Luxembourg 12 December 1971
14   Switzerland 28 August 1973
15  DDR (expired in 1999)
16  Norway 4 April 1975
17  Finland 17 September 1976
18  Denmark 20 December 1976
19  Romania 21 February 1977
20  Poland 13 March 1979
21  Portugal 28 March 1980
22  Russian Federation 17 February 1987
23  Greece 5 December 1992
24  Ireland 24 March 1998
25  Croatia 8 October 1991
26  Slovenia 25 June 1991
27  Slovakia 1 January 1993
28  Belarus 2 July 1995
29  Estonia 1 May 1995
31  Bosnia and Herzegovina 6 March 1992
32  Latvia 18 January 1999
34  Bulgaria 21 January 2000
35  Kazakhstan 8 January 2011
36  Lithuania 29 March 2002
37  Turkey 27 February 1996
39  Azerbaijan 14 June 2002
40  Republic of Macedonia 17 November 1991
42  European Union 24 March 1998
43  Japan 24 November 1998
45  Australia 25 April 2000
46  Ukraine 30 June 2000
47  South Africa 17 June 2001
48  New Zealand 26 January 2002
49  Cyprus 1 May 2004
50  Malta 1 May 2004
51  South Korea 31 December 2004
52  Malaysia 4 April 2006
53  Thailand 1 May 2006
54  Albania 5 November 2011
56  Montenegro 3 June 2006
58  Tunisia 1 January 2008

Most countries, even if not formally participating in the 1958 agreement, recognise the UN Regulations and either mirror the UN Regulations' content in their own national requirements, or permit the import, registration, and use of UN type-approved vehicles, or both. The United States and Canada are the two significant exceptions; their UN regulations are generally not recognised and UN-compliant vehicles and equipment are not authorised for import, sale, or use in the US, unless they are tested to be compliant with US car safety laws, or for limited non driving use (E.G. car show displays).[4]

Type approval

Two types of EU markings: top - according to UN regulations, bottom - according to EC directives

The 1958 Agreement operates on the principles of type approval and reciprocal recognition. Any country that accedes to the 1958 Agreement has authority to test and approve any manufacturer's design of a regulated product, regardless of the country in which that component was produced. Each individual design from each individual manufacturer is counted as one individual type. Once any acceding country grants a type approval, every other acceding country is obliged to honor that type approval and regard that vehicle or item of motor vehicle equipment as legal for import, sale and use. Items type-approved according to a UN Regulation are marked with an E and a number, within a circle. The number indicates which country approved the item, and other surrounding letters and digits indicate the precise version of the regulation met and the type approval number, respectively.

Although all countries' type approvals are legally equivalent, there are real and perceived differences in the rigour with which the regulations and protocols are applied by different national type approval authorities. Some countries have their own national standards for granting type approvals, which may be more stringent than called for by the UN regulations themselves. Within the auto parts industry, a German (E1) type approval, for example, is regarded as a measure of insurance against suspicion of poor quality or an undeserved type approval.[5]

UN Regulations

As of 2015, there are 135 UN Regulations appended to the 1958 Agreement; most regulations cover a single vehicle component or technology. A partial list of current regulations applying to passenger cars follows (different regulations may apply to heavy vehicles, motorcycles, etc.)

General lighting


Headlamps

Instrumentation/controls

Crashworthiness

Environmental compatibility

North America

The most notable non-signatory to the 1958 Agreement is the United States, which has its own Federal Motor Vehicle Safety Standards and does not recognise UN type approvals. However, both the United States and Canada are parties to the 1998 Agreement. UN-specification vehicles and components which do not also comply with the US regulations therefore cannot be imported to the US without extensive modifications. Canada has its own Canada Motor Vehicle Safety Standards, broadly similar to the US FMVSS, but Canada does also accept UN-compliant headlamps and bumpers. It should be noted, however, that the impending Comprehensive Economic and Trade Agreement between Canada and the European Union (likely to be ratified in 2015) could see Canada recognise more UN Regulations as acceptable alternatives to the Canadian regulations.[7] Canada currently applies 14 of the 17 ECE main standards as allowable alternatives - the exceptions at this point relate to motorcycle controls and displays, motorcycle mirrors, and electronic stability control for passenger cars. These three remaining groups will be allowed in Canada by the time the ratification of the trade deal occurs.

Self-certification

Rather than a UN-style system of type approvals, the US and Canadian auto safety regulations operate on the principle of self-certification, wherein the manufacturer or importer of a vehicle or item of motor vehicle equipment certifies—i.e., asserts and promises—that the vehicle or equipment complies with all applicable federal or Canada Motor Vehicle Safety, bumper and antitheft standards.[8] No prior verification is required by a governmental agency or authorised testing entity before the vehicle or equipment can be imported, sold, or used. If reason develops to believe the certification was false or improper — i.e., that the vehicle or equipment does not in fact comply — then authorities may conduct tests and, if a noncompliance is found, order a recall and/or other corrective and/or punitive measures. Vehicle and equipment makers are permitted to appeal such penalties by filing petitions for finding of noncompliance inconsequential to safety.

Regulatory differences

A comparison of European (top) and US (bottom) headlamp configuration on similar-year Citroën DS cars

Historically, one of the most conspicuous differences between UN and US regulations was the design and performance of headlamps. The Citroën DS shown here illustrates the large differences in headlamps during the 1940-1983 era when US regulations required sealed beam headlamps.[9] [10] It is not currently possible to produce a single car design that fully meets both UN and US requirements simultaneously,[11] but it is growing easier as technology and both sets of regulations evolve. Given the size of the US vehicle market, and differing marketing strategies in North America vs. the rest of the world, many manufacturers produce vehicles in three versions: North American, rest-of-world right-hand drive (RHD) and rest-of-world left-hand-drive (LHD).[11]

1998 Agreement

The "Agreement concerning the Establishing of Global Technical Regulations for Wheeled Vehicles, Equipment and Parts which can be fitted and/or be used on Wheeled Vehicles", or 1998 Agreement, is a subsequent agreement. Following its mission to harmonize vehicle regulations, the UNECE solved the main issues (Administrative Provisions for Type approval opposed to self-certification and mutual recognition of Type Approvals) preventing non-signatory Countries to the 1958 Agreement to fully participate to its activities.

The 1998 Agreement is born to produce meta regulations called Global Technical Regulations without administrative procedures for type approval and so, without the principle of mutual recognition of Type Approvals. The 1998 Agreement stipulates that Contracting Parties will establish, by consensus vote, United Nations Global Technical Regulations (UN GTRs) in a UN Global Registry. The UN GTRs contain globally harmonized performance requirements and test procedures. Each UN GTR contains extensive notes on its development. The text includes a record of the technical rationale, the research sources used, cost and benefit considerations, and references to data consulted. The Contracting Parties use their nationally established rulemaking processes when transposing UN GTRs into their national legislation. The 1998 Agreement currently has 33 Contracting Parties and 14 UN GTRs that have been established into the UN Global Registry.[12]

2013 Transatlantic Trade and Investment Partnership (proposed)

As part of the Transatlantic Trade and Investment Partnership (TTIP) negotiations, the issues of divergent standards in automobile regulatory structure are being investigated. TTIP negotiators are seeking to identify ways to narrow the regulatory differences, potentially reducing costs and spurring additional trade in vehicles.[8]

OICA

Organisation Internationale des Constructeurs d'Automobiles (OICA) hosts on its web site the working documents from various United Nations expert groups including World Forum for Harmonization of Vehicle Regulations.[13]

See also

References

  1. ↑ http://www.unece.org/trans/main/wp29/WP29-FAQ-2005.pdf
  2. ↑ WP.29: Nomenclature
  3. ↑ The End of the 'ECE' Era, Driving Vision News, 29 August 2011
  4. ↑ http://www.digitaltrends.com/cars/grey-market-cars-everything-you-need-to-know/
  5. ↑ "Marketing emphasis on German E1 type approval" (PDF). Retrieved 2011-11-13.
  6. ↑ http://www.unece.org/trans/main/wp29/wp29regs/r100a1e.pdf
  7. ↑ "CETA Means Big Changes For Canadian Automotive Industry". 18 October 2013. Retrieved 20 March 2014.
  8. 1 2 https://www.hsdl.org/?view&did=751039
  9. ↑ http://www.motivemag.com/pub/feature/tech/Motive_Tech_The_Difference_Between_US_and_European_Lights.shtml
  10. ↑ http://www.nbc.com/jay-lenos-garage/video/1971-citroen-ds/2839548?onid=159436#vc159436=1
  11. 1 2 http://jalopnik.com/a-simple-explanation-why-america-doesnt-get-european-h-1493377285
  12. ↑ "Global Technical Regulations(GTRs)of UNECE". Retrieved 2014-02-05.
  13. ↑ "OICA un-expert-group-documents". Oica.net. Retrieved 2011-11-13.

External links

This article is issued from Wikipedia - version of the Friday, November 27, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.