Tree fork

A tree fork is a bifurcation in the trunk of a tree giving rise to two roughly equal diameter branches. These forks are a common feature of tree crowns. The wood grain orientation at the top of a tree fork is such that wood cells interlock to provide sufficient mechanical support. A common malformation of a tree fork is where bark has formed within the join and these bark-included junctions have a heightened risk of failure.

Typical wood grain pattern at a mature tree fork, Slater et al.2014[1]

Definition of a tree fork

A typical tree fork in a Norway maple (Acer platanoides)

In arboriculture, junctions in the crown structure of trees are frequently categorised as either branch-to-stem attachments or co-dominant stems.[2] Co-dominant stems are where the two or more arising branches emerging from the junction are of near equal diameter and this type of junction in a tree is often referred to in layman's terms as 'a tree fork'.[3][4]

There is actually no hard botanical division between these two forms of tree junction: they are topologically equivalent, and from their external appearance it is only a matter of the diameter ratio between the branches that are conjoined that separates a tree fork from being a branch-to-stem junction.[5] However, when a small branch joins to a tree trunk there is a knot that can be found to be embedded into the trunk of the tree, which was the initial base of the smaller branch. This is not the case in tree forks, as each branch is roughly equal in size and no substantial tissues from either branch is embedded into the other, so there is no reinforcing knot to supply the mechanical strength to the junction that will be needed to hold the branches aloft.[6]

Wood grain pattern of a fork of Fraxinus excelsior (Common ash), as found by stripping off the outer and inner bark layers

Tree fork anatomy and morphology

Research has shown that a unique wood grain pattern at the apex of forks in hazel trees (Corylus avellana L.) acts to hold together the branches in this species, and this is probably the case in most other woody plants and trees.[7][8][9] This is an example of 'trade-off' in xylem, where mechanical strength to the tree's junction is gained at the expense of efficiency in tree sap conductance [10] The complex interlocking wood grain patterns developed within tree forks present a great opportunity for biomimicry (the mimicking of natural biological structures in man-made materials) in fibrous materials, where the production of a Y-shaped or T-shaped component is needed:[11] particularly in such components that may need to act as a conduit for liquids as well as being mechanically strong.

Tree fork morphology has been shown to alter with the angle of inclination of the fork from the vertical axis.[12] As the fork becomes more tilted from the vertical, the branches become more elliptical in cross-section, to adapt to the additional lateral loading upon them, and Buckley, Slater and Ennos (2015) showed that this adaption resulted in stronger tree forks when the fork was more inclined away from the vertical.

Bark inclusions and fork strength

Where a junction forms in a tree and bark is incorporated into the join, this is referred to as an 'included bark junction' or 'bark inclusion'. These can be substantially weaker in strength than normal tree forks, and can become a significant hazard in a tree.[13][14] Research has shown that in hazel trees, the more the included bark is occluded within new wood growth, the stronger that junction will be, with the weakest forks being those with a large amount of unoccluded bark at their apex.[15] Common tree care practices are to prune out such bark-included forks at an early stage of the tree's development, to brace the two arising branches above such a junction so that they can not split apart, or to reduce the length of the smaller arising branch, so that it is subordinated to the larger branch.[16]

An included bark junction formed in a wild cherry tree (Prunus avium)

The strength of a normally-formed tree fork can be assessed by its shape: those that are more U-shaped are typically considerably stronger than those that are V-shaped at their apex.[17] This characteristic, and the presence of bark included in a tree fork, are important attributes for tree surveyors and tree contractors to note in order to assess whether the tree fork is a defect in the structure of a tree.[18]

A junction with included bark that failed in storm conditions, growing on a hazel tree (Corylus avellana)

See also

References

  1. ↑ Slater, D. Bradley, R, Withers, P. and Ennos, A. R. (2014) The anatomy and grain pattern in forks of hazel (Corylus avellana L.) and other tree species, Trees 28 (5) 1437-1448
  2. ↑ Smiley, E. T. (2003) Does included bark reduce the strength of co-dominant stems?; Journal of Arboriculture 29(2) pp. 104-106
  3. ↑ Harris, R.W. Clark, J. R. and Matheny, N. P. (1999) Arboriculture: Integrated Management of Landscape Trees, Shrubs and Vines; 3rd Ed.; Prentice Hall
  4. ↑ Lonsdale, D.(2000) Hazards from Trees: A general guide; Forestry Commission Practice Guide; TSO
  5. ↑ Slater, D. and Harbinson, C. J. (2010) Towards a new model for branch attachment; Arboricultural Journal 33 (2) 95-105
  6. ↑ Slater, D. and Harbinson, C. J. (2010) Towards a new model for branch attachment; Arboricultural Journal 33 (2) 95-105
  7. ↑ Slater, D. and Ennos, A. R. (2013) Determining the mechanical properties of hazel forks by testing their component parts, Trees 27 (6) 1515-1524
  8. ↑ Slater, D. Bradley, R, Withers, P. and Ennos, A. R. (2014) The anatomy and grain pattern in forks of hazel (Corylus avellana L.) and other tree species, Trees 28 (5) 1437-1448
  9. ↑ Slater, D. and Ennos, A. R. (2015) Interlocking wood grain patterns provide improved wood strength in forks of hazel (Corylus avellana L.), Arboricultural Journal 37 (1) 1-12
  10. ↑ Domec J.C. & Gartner B.L. (2001) Cavitation and water storage capacity in bole xylem segments of mature and young Douglas-fir trees. Trees 15, 204–214
  11. ↑ Burns L.A., Mouritz A.P.,Pook D. and Feih, S. (2012) Bio-inspired design of aerospace composite joints for improved damage tolerance; Composite Structures 94 995–1004
  12. ↑ Buckley, G. Slater, D. and Ennos, A. R. (2015) Angle of inclination affects the morphology and strength of bifurcations in hazel (Corylus avellana L.), Arboricultural Journal 37 (2) 99-112
  13. ↑ Lonsdale, D. (1999) Principles of Tree Hazard Assessment and Management, TSO: London
  14. ↑ Smiley, E. T. (2003) Does included bark reduce the strength of co-dominant stems? Journal of Arboriculture 29 (2): 104-106
  15. ↑ Slater, D. and Ennos, A. R. (2015) The level of occlusion of included bark affects the strength of bifurcations in hazel (Corylus avellana L.) Journal of Arboriculture and Urban Forestry 41 (4): 194-207
  16. ↑ Gilman E. F. (2012) Illustrated guide to pruning; third edition; Delmar publishers, Albany, NY.
  17. ↑ Turner, S., Slater, D. and Ennos, A. R. (2012) Failure of forks in clonal varieties of Platanus x acerifolia; Arboricultural Journal 34 179-189
  18. ↑ Lonsdale, D.(2000) Hazards from Trees: A general guide; Forestry Commission Practice Guide; TSO

External links

This article is issued from Wikipedia - version of the Saturday, December 05, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.