2-Butene

2-Butene
cis
trans
cis
trans
Names
IUPAC name
But-2-ene
Other names
β-Butylene
Identifiers
107-01-7 YesY
590-18-1 (cis) YesY
624-64-6 (trans) YesY
ChEBI CHEBI:48363 YesY
ChemSpider 11719 YesY
4449912 (cis)
56442 (trans)
EC Number 203-452-9
Jmol interactive 3D Image
(cis): Image
(trans): Image
PubChem 5287573 (cis)
62695 (trans)
RTECS number EM2932000
UNII S1SK37516R YesY
Properties
C4H8
Molar mass 56.106 g/mol
Density 0.641 g/mL (cis, at 3.7 °C)[1]
0.626 g/mL (trans, at 0.9 °C)[2]
Melting point -138.9 ºC (cis)[1]
-105.5 °C (trans)[2]
Boiling point 3.7 ºC (cis)[1]
0.9 °C (trans)[2]
Hazards[3]
GHS pictograms
GHS signal word DANGER
H220
P210, P377, P381, P403
Extremely flammable (F+)
R-phrases R12
S-phrases (S2) S9 S16 S33
NFPA 704
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g., propane Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
4
1
0
Flash point −72 °C (−98 °F)[1][2]
325 °C (617 °F; 598 K)[1][2]
Related compounds
Related butenes
 1-Butene
cis-2-Butene
trans-2-Butene
Isobutene
Related compounds
 Butane
Butyne
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

2-Butene is an acyclic alkene with four carbon atoms. It is the simplest alkene exhibiting cis/trans-isomerism (also known as (E/Z)-isomerism); that is, it exists as two geometric isomers cis-2-butene ((Z)-2-butene) and trans-2-butene ((E)-2-butene).

It is a petrochemical, produced by the catalytic cracking of crude oil or the dimerization of ethylene. Its main uses are in the production of gasoline (petrol) and butadiene,[4] although some 2-butene is also used to produce the solvent butanone via hydration to 2-butanol followed by oxidation.

The two isomers are extremely difficult to separate by distillation because of the proximity of their boiling points (~4 °C for cis and ~1 °C for trans[5]). However, separation is unnecessary in most industrial settings, as both isomers behave similarly in most of the desired reactions. A typical industrial 2-butene mixture is 70% (Z)-2-butene (cis-isomer) and 30% (E)-2-butene (trans-isomer). Butane and 1-butene are common impurities, present at 1% or more in industrial mixtures, which also contain smaller amounts of isobutene, butadiene and butyne.[4]

References

  1. 1 2 3 4 5 Record in the GESTIS Substance Database of the IFA
  2. 1 2 3 4 5 Record in the GESTIS Substance Database of the IFA
  3. ↑ cis-2-Butene, International Chemical Safety Card 0397, Geneva: International Programme on Chemical Safety, March 1996. trans-2-Butene, International Chemical Safety Card 0398, Geneva: International Programme on Chemical Safety, March 1996.
  4. 1 2 2-Butene (PDF), SIDS Initial Assessment Report, Geneva: United Nations Environment Programme, February 1995.
  5. ↑ Chemical Safety Information from Intergovernmental Organizations

External links

This article is issued from Wikipedia - version of the Wednesday, December 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.