Three utilities problem

The phrase "water, gas and electricity" may refer in general to a public utility.

The classical mathematical puzzle known as the three utilities problem; the three cottages problem or sometimes water, gas and electricity can be stated as follows:

Suppose there are three cottages on a plane (or sphere) and each needs to be connected to the gas, water, and electricity companies. Without using a third dimension or sending any of the connections through another company or cottage, is there a way to make all nine connections without any of the lines crossing each other?

The problem is an abstract mathematical puzzle which imposes constraints that would not exist in a practical engineering situation.

History

Henry Dudeney states that the problem is "as old as the hills...much older than electric lighting, or even gas";[1] a review of the problem's history is given by Kullman who states that most published references to the problem characterize it as "very ancient".[2]

Solution

The utility graph, also known as the Thomsen graph or K3,3

The problem itself, as presented at the top of this article, is strictly impossible on a flat two-dimensional plane. However, a less-strict variation is possible, assuming one is allowed to pass through the cottages and / or utilities. With this alteration, it is "no longer impossible to connect the three cottages with the three different utilities without at least one of the connections crossing another".

The problem is part of the mathematical field of topological graph theory which studies the embedding of graphs on surfaces. In more formal graph-theoretic terms, the problem asks whether the complete bipartite graph K3,3 is planar. This graph is often referred to as the utility graph in reference to the problem;[3] it has also been called the Thomsen graph.[4] The graph is equivalent to the circulant graph Ci6(1,3). Kazimierz Kuratowski proved in 1930 that K3,3 is nonplanar, and thus that the problem has no solution. Kullman, however, states that "Interestingly enough, Kuratowski did not publish a detailed proof that [ K3,3 is ] non-planar".[2]

One proof of the impossibility of finding a planar embedding of K3,3 uses a case analysis involving the Jordan curve theorem, in which one examines different possibilities for the locations of the vertices with respect to the 4-cycles of the graph and shows that they are all inconsistent with a planar embedding.[5] Alternatively, it is possible to show that any bridgeless bipartite planar graph with V vertices and E edges has E ≤ 2V 4 by combining the Euler formula V - E + F = 2 (where F is the number of faces of a planar embedding) with the observation that the number of faces is at most half the number of edges (because each face has at least four edges and each edge belongs to exactly two faces). In the utility graph, E = 9 and 2V  4 = 8, violating this inequality, so the utility graph cannot be planar.

Two important characterizations of planar graphs, Kuratowski's theorem that the planar graphs are exactly the graphs that contain neither K3,3 nor the complete graph K5 as a subdivision, and Wagner's theorem that the planar graphs are exactly the graphs that contain neither K3,3 nor K5 as a minor, encompass this result.

Generalizations

K3,3 drawn with only one crossing.

K3,3 is toroidal, which means it can be embedded on a torus. In terms of the three cottage problem this means the problem can be solved by punching two holes through the plane (or the sphere) and connecting them with a tube. This changes the topological properties of the surface and using the tube we can connect the three cottages without crossing lines. An equivalent statement is that the graph genus of the utility graph is one, and therefore it cannot be embedded in a surface of genus less than one. A surface of genus one is equivalent to a torus.

Pál Turán's "brick factory problem" asks more generally for a formula for the minimum number of crossings in a drawing of the complete bipartite graph Ka,b in terms of the numbers of vertices a and b on the two sides of the bipartition. The utility graph K3,3 may be drawn with only one crossing, but not with zero crossings, so its crossing number is one. A toroidal embedding of K3,3 may be obtained by replacing the crossing by a tube, as described above, in which the two holes where the tube connects to the plane are placed along one of the crossing edges on either side of the crossing.

Other graph-theoretic properties

The utility graph K3,3 is, like all other complete bipartite graphs, a well-covered graph, meaning that every maximal independent set has the same size. In this graph, the only two maximal independent sets are the two sides of the bipartition, and obviously they are equal. K3,3 is one of only seven 3-regular 3-connected well-covered graphs.[6]

It is also a Laman graph, meaning that it forms a minimally rigid system when it is embedded (with crossings) in the plane. It is the smallest example of a nonplanar Laman graph, as the other minimal nonplanar graph, K5, is not minimally rigid.

See also

References

  1. Dudeney, Henry (1917). Amusements in mathematics. Thomas Nelson.
  2. 1 2 Kullman, David (1979). "The Utilities Problem". Mathematics Magazine 52 (5): 299302. JSTOR 2689782.
  3. Utility Graph from mathworld.wolfram.com
  4. Brown, W. G. (1966), "On graphs that do not contain a Thomsen graph", Canadian Mathematical Bulletin 9: 281–285, doi:10.4153/CMB-1966-036-2, MR 0200182.
  5. Trudeau, Richard J. (1993). Introduction to Graph Theory (Corrected, enlarged republication. ed.). New York: Dover Pub. pp. 68–70. ISBN 978-0-486-67870-2. Retrieved 8 August 2012.
  6. Campbell, S. R.; Ellingham, M. N.; Royle, Gordon F. (1993), "A characterisation of well-covered cubic graphs", Journal of Combinatorial Mathematics and Combinatorial Computing 13: 193–212, MR 1220613.

External links

This article is issued from Wikipedia - version of the Sunday, January 31, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.