Texas State Highway Loop 485
State Highway Loop 485 | ||||
---|---|---|---|---|
Route information | ||||
Length: | 3.1 mi[1] (5.0 km) | |||
Existed: | 1970 – present | |||
Major junctions | ||||
CCW end: | US 271 at Gladewater | |||
US 80 in Gladewater | ||||
CW end: | US 271 at Gladewater | |||
Location | ||||
Counties: | Gregg | |||
Highway system | ||||
|
State Highway Loop 485 or Loop 485 is a Texas state highway loop around the city of Gladewater. It runs from US 271 in a clockwise direction back to US 271 in Gladewater.
Counties and junctions
The entire route is in Gladewater, Gregg County.
mi | km | Destinations | Notes | ||
---|---|---|---|---|---|
US 271 (Main St) – Tyler, Gilmer | |||||
US 80 (Upshur Ave) – White Oak, Big Sandy | |||||
US 271 (Tyler Rd) – Tyler, Gilmer | |||||
1.000 mi = 1.609 km; 1.000 km = 0.621 mi |
References
- ↑ Transportation Planning and Programming Division. "State Highway Loop No. 485". Highway Designation Files. Texas Department of Transportation. Retrieved 2010-11-01.
This article is issued from Wikipedia - version of the Saturday, November 02, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.