Stress majorization

Stress majorization is an optimization strategy used in multidimensional scaling (MDS) where, for a set of n m-dimensional data items, a configuration X of n points in r(<<m)-dimensional space is sought that minimizes the so-called stress function $\sigma(X)$ . Usually r is 2 or 3, i.e. the (r x n) matrix X lists points in 2- or 3-dimensional Euclidean space so that the result may be visualised (i.e. an MDS plot). The function $\sigma$ is a cost or loss function that measures the squared differences between ideal ( $m$ -dimensional) distances and actual distances in r-dimensional space. It is defined as:

\sigma(X)=\sum_{i<j\le n}w_{ij}(d_{ij}(X)-\delta_{ij})^2

where $w_{ij}\ge 0$ is a weight for the measurement between a pair of points $(i,j)$ , $d_{ij}(X)$ is the euclidean distance between $i$ and $j$ and $\delta_{ij}$ is the ideal distance between the points (their separation) in the $m$ -dimensional data space. Note that $w_{ij}$ can be used to specify a degree of confidence in the similarity between points (e.g. 0 can be specified if there is no information for a particular pair).

A configuration $X$ which minimizes $\sigma(X)$ gives a plot in which points that are close together correspond to points that are also close together in the original $m$ -dimensional data space.

There are many ways that $\sigma(X)$ could be minimized. For example, Kruskal^[1] recommended an iterative steepest descent approach. However, a significantly better (in terms of guarantees on, and rate of, convergence) method for minimizing stress was introduced by Jan de Leeuw.^[2] De Leeuw's iterative majorization method at each step minimizes a simple convex function which both bounds $\sigma$ from above and touches the surface of $\sigma$ at a point $Z$ , called the supporting point. In convex analysis such a function is called a majorizing function. This iterative majorization process is also referred to as the SMACOF algorithm ("Scaling by majorizing a convex function").

The SMACOF algorithm

The stress function $\sigma$ can be expanded as follows:

\sigma(X)=\sum_{i<j\le n}w_{ij}(d_{ij}(X)-\delta_{ij})^2 =\sum_{i<j}w_{ij}\delta_{ij}^2 + \sum_{i<j}w_{ij}d_{ij}^2(X)-2\sum_{i<j}w_{ij}\delta_{ij}d_{ij}(X)

Note that the first term is a constant $C$ and the second term is quadratic in X (i.e. for the Hessian matrix V the second term is equivalent to tr $X'VX$ ) and therefore relatively easily solved. The third term is bounded by:

\sum_{i<j}w_{ij}\delta_{ij}d_{ij}(X)=\,\operatorname{tr}\, X'B(X)X \ge \,\operatorname{tr}\, X'B(Z)Z

where $B(Z)$ has:

b_{ij}=-\frac{w_{ij}\delta_{ij}}{d_{ij}(Z)}

for

d_{ij}(Z)\ne 0, i \ne j

and $b_{ij}=0$ for $d_{ij}(Z)=0, i\ne j$

and $b_{ii}=-\sum_{j=1,j\ne i}^n b_{ij}$ .

Proof of this inequality is by the Cauchy-Schwarz inequality, see Borg^[3] (pp. 152–153).

Thus, we have a simple quadratic function $\tau(X,Z)$ that majorizes stress:

\sigma(X)=C+\,\operatorname{tr}\, X'VX - 2 \,\operatorname{tr}\, X'B(X)X

\le C+\,\operatorname{tr}\, X' V X - 2 \,\operatorname{tr}\, X'B(Z)Z = \tau(X,Z)

The iterative minimization procedure is then:

at the k^th step we set $Z\leftarrow X^{k-1}$
$X^k\leftarrow \min_X \tau(X,Z)$
stop if $\sigma(X^{k-1})-\sigma(X^{k})<\epsilon$ otherwise repeat.

This algorithm has been shown to decrease stress monotonically (see de Leeuw^[2]).

Use in graph drawing

Stress majorization and algorithms similar to SMACOF also have application in the field of graph drawing.^[4]^[5] That is, one can find a reasonably aesthetically appealing layout for a network or graph by minimizing a stress function over the positions of the nodes in the graph. In this case, the $\delta_{ij}$ are usually set to the graph-theoretic distances between nodes i and j and the weights $w_{ij}$ are taken to be $\delta_{ij}^{-\alpha}$ . Here, $\alpha$ is chosen as a trade-off between preserving long- or short-range ideal distances. Good results have been shown for $\alpha=2$ .^[6]

References

↑ Kruskal, J. B. (1964), "Multidimensional scaling by optimizing goodness of fit to a nonmetric hypothesis", Psychometrika 29 (1): 1–27, doi:10.1007/BF02289565 .
1 2 de Leeuw, J. (1977), "Applications of convex analysis to multidimensional scaling", in Barra, J. R.; Brodeau, F.; Romie, G.; et al., Recent developments in statistics, pp. 133–145 .
↑ Borg, I.; Groenen, P. (1997), Modern Multidimensional Scaling: theory and applications, New York: Springer-Verlag .
↑ Michailidis, G.; de Leeuw, J. (2001), "Data visualization through graph drawing", Computation Stat. 16 (3): 435–450, doi:10.1007/s001800100077 .
↑ Gansner, E.; Koren, Y.; North, S. (2004), "Graph Drawing by Stress Majorization", Proceedings of 12th Int. Symp. Graph Drawing (GD'04), Lecture Notes in Computer Science 3383, Springer-Verlag, pp. 239–250 .
↑ Cohen, J. (1997), "Drawing graphs to convey proximity: an incremental arrangement method", ACM Transactions on Computer-Human Interaction 4 (3): 197–229, doi:10.1145/264645.264657 .

This article is issued from Wikipedia - version of the Tuesday, December 29, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.