Texas State Highway 20

State Highway 20
Route information
Maintained by TxDOT
Length:	78.061 mi[1] (125.627 km)
Existed:	1969 – present
Major junctions
West end:	NM 460 / NM 478 in Anthony
	SH 178 in El Paso I-10 / US 85 / US 180 in El Paso I-10 / US 180 in El Paso I-110 / US 54 in El Paso US 62 in El Paso
East end:	I-10 in McNary
Location
Counties:	El Paso, Hudspeth
Highway system
Highways in Texas Interstate US State Toll Loops Spurs Park Rec FM ← SH 19 SH 21 →

State Highway 20 or SH 20 is a 78.1-mile (125.7 km) highway maintained by the Texas Department of Transportation (TxDOT) that runs from New Mexico State Road 460 at the state line between Texas and New Mexico at Anthony in El Paso County to Interstate 10 at McNary in Hudspeth County. The route passes through the city of El Paso as well as suburban and rural farming communities along the Rio Grande. With the exception of a stretch north of central El Paso where the route crosses north of I-10, the route generally runs in a narrow belt between I-10 and the Rio Grande. The route has connections to every international border crossing with Mexico in the El Paso area and has important intersections with US 54, US 62, US 85, and US 180.

Until the late 1930s, the route designation belonged to a highway in central Texas along the route of present day US 290. The current route predates the Texas highway system having been a portion of several historic auto trails. The route was included at the creation of the state system as part of SH 1. With the establishment of the U.S. numbered highway system, the route became US 80 and the SH 1 designation was eventually dropped. SH 20 was designated over the route when US 80 was relocated over I-10 before it too was decommissioned in western Texas.

History

Previous route

In 1917, the same year that the Texas State Highway Department (now TxDOT) was created,^[2] the department's Office of State Highway Engineer issued a proposal for the state highway system. The proposal included a Highway 20 originally planned between Austin and Houston by way of Giddings, Brenham, and Hempstead. Later that year, the planned route was extended from Austin to Brady by way of Burnet, Llano, and Mason.^[3]

A second proposal in 1919 left the route largely intact, but shortened it with termini in Mason and Hempstead. This proposal added an auxiliary route, Highway 20A from Austin through Johnson City to Fredericksburg.^[4] The highway routes remained unchanged in a 1922 proposal that rated both routes as "second class" under a three-tier system.^[5]

In 1924, the state highway department assumed responsibility to maintain all state highways which were previously maintained by the counties. The following year, state lawmakers vest the department with the authority to acquire right of way, survey, plan, and build highways.^[2] By 1926, SH 20 in the new highway system was routed over the previously proposed Highway 20A from Fredericksburg to Austin and then over the proposed Highway 20 to Hempstead as a second class highway, and the route was given a third class extension to Kerrville.^[6] By 1928, SH 20 was given an auxiliary route SH 20A from Fredericksburg to a point on the highway between Kerrville and Junction. All of the highway from Fredericksburg to Hempstead was classified as a "secondary federal highway". The portion between Fredericksburg and Kerrville along with the new auxiliary route were classified as "state highways" eligible for state aid only.^[7]

By 1933 the SH 20 designation was dropped over the Fredericksburg to Kerrville highway and extended instead over the auxiliary route SH 20A. That year the road was described between Fredericksburg and Hempstead as paved except for the portion in Hays County around Dripping Springs and a short portion west of Elgin that were described as surfaced. The portion west of Fredericksburg toward Junction was graded earth.^[8] In 1935, US 290 was routed over SH 20 except for the portion between Austin and Paige where US 290 was routed further south through Bastrop.^[9] By 1936, the formerly surfaced portion west of Elgin had been paved, but the Hays County portion remained merely surfaced. West of Fredericksburg, the Gillespie County portion had been surfaced while the Kimble County portion remained as an improved earth road.^[10] In 1939, the SH 20 designation was dropped along all portions of the route running along US 290 as a result of that year's general redescription of the state highway system leaving SH 20 as a greatly shortened route running from Austin to US 290 near Paige. In 1951, US 290 was relocated away from Bastrop northward along SH 20 which was then decommissioned.^[1]

Current route

Before the state established its highway system, the route of SH 20 was used by many historic auto trails including the Dixie Overland Highway, the Old Spanish Trail, the Lee Highway, the Jefferson Davis National Highway, and the Bankhead Highway.^[11]

The current SH 20 was originally a part of the former SH 1, a route that from the current eastern terminus of the present route continued on through Van Horn, Odessa, Midland, Abilene, Fort Worth, and Dallas before entering Arkansas at Texarkana. This route was also one of the original routes planned in 1917,^[3] and remained largely unchanged until the end of the 1930s.^{[3][4][5][6][7][8][10]}

In 1927, US 80 was designated over the route of SH 1 from the New Mexico state line at Anthony to Dallas and then proceeding east to the Louisiana state line east of Waskom.^[12] The highway carried both the US 80 and SH 1 designations until the 1939 general redescription of the state highway system when SH 1 was decommissioned outside the city of Dallas.^[13] In 1944, the full length of US 80 within Texas was designated as the Veterans of World War II Highway.^[12] US 80 was relocated over I-10 through El Paso in 1969, and its former route was then renamed SH 20.^[1] US 80 was decommissioned west of Dallas in 1991.^[12]

Route description

SH 20 begins where NM 460 (Co-signed with NM 478), also called Anthony Dr., reaches the state line between Anthony, New Mexico and Anthony, Texas in the El Paso area's Upper Valley. The route proceeds south through Anthony along Main St. passing Federal Correctional Institution, La Tuna. The route then enters Vinton where it becomes Doniphan Dr. Further south in Canutillo the route intersects Loop 375, El Paso's beltway. After entering the city of El Paso, the route intersects SH 178 which connects the route via NM 136 to the international border with Mexico south of Santa Teresa, New Mexico. Further south, SH 20 turns off of Doniphan Dr. and onto Mesa St. and soon after crosses the I-10 freeway which also carries US 85 and US 180 at this point. The route continues to the southeast passing through the foothills of the Franklin Mountains. The route then passes the University of Texas at El Paso and Sun Bowl Stadium before entering central El Paso.^[14]

In central El Paso, the route crosses I-10 and US 180 again and then soon after turns northeast on Texas Ave. where the route crosses Santa Fe St. and Stanton St. leading to the Paso del Norte International Bridge and Good Neighbor International Bridge to Ciudad Juárez. The route then turns east along Alameda Ave. The route then crosses Loop 478 before crossing the unsigned I-110 and US 54 at the Patriot Freeway which leads to the international Bridge of the Americas. The route crosses US 62 at Paisano Dr. before the route turns southeast at Ascarate Park and enters the Lower Valley.^[14]

At Zaragoza Rd., which leads to the Ysleta-Zaragoza International Bridge, the route intersects FM 258 and passes Ysleta Mission in the Ysleta del Sur Pueblo Native American reservation. The route crosses Loop 375 again before entering Socorro where the route continues along Alameda. Further to the southeast at Clint, SH 20 crosses FM 1110 to San Elizario. In Fabens, where SH 20 is known as Main St., the route crosses FM 76 which leads toward the Fabens-Caseta International Bridge. The route passes through Tornillo as Alameda Ave. again before leaving El Paso County.^[14]

In Hudspeth County, the route intersects Spur 148 which passes through central Fort Hancock. A short distance later, the route intersects FM 1088 which connects Fort Hancock to the Fort Hancock – El Porvenir International Bridge. At McNary, the route intersects FM 2217 which continues along the Lower Valley, and then terminates at I-10.^[14]

Major intersections

County	Location	mi[14]	km	Destinations	Notes
El Paso	Anthony	0.0	0.0	NM 460 north (Anthony Drive)
		0.0	0.0	FM 1905 west (Washington Street)	west end of FM 1905 overlap
		0.1	0.2	FM 1905 east (Franklin Street) to I-10	east end of FM 1905 overlap
		0.6	1.0	Spur 6 east (Wildcat Drive) to I-10
	Vinton	2.9	4.7	To I-10 / Vinton Road (Spur 37) – Vinton, Westway
	Canutillo	5.9	9.5	FM 259
		6.4	10.3	Loop 375 east (Talbot Drive) to I-10
	El Paso			Spur 16
		8.5	13.7	SH 178 (Artcraft Road) to I-10	interchange
		11.8	19.0	I-10 / US 85 / US 180 – Las Cruces	I-10 exit 11
		19.7	31.7	I-10 (US 180)	I-10 exit 19
				To Fed. 45 / Mesa Street
		22.5	36.2	Loop 478 (Copia Street)
		24.0	38.6	US 62 (Paisano Drive) to I-10 – Juarez
		24.8	39.9	FM 1505 (Clark Drive)
		25.7	41.4	FM 76 east (Delta Drive)
		32.2	51.8	FM 258 east (Zaragoza Road) to I-10
		33.4	53.8	Loop 375 (Americas Avenue) to I-10	Loop 375 exit 47
	Clint	41.5	66.8	FM 1110 (Clint) to I-10 – San Elizario Mission
	Fabens	48.1	77.4	FM 258 west
		48.7	78.4	FM 76 (Island Rd.) to I-10 / FM 793 – Port of Entry
				FM 3380 (M.F. Aguilera Road)
Hudspeth	Fort Hancock	72.2	116.2	Spur 148 to I-10
		73.1	117.6	FM 1088 south – Port of Entry
		77.2	124.2	FM 192
		78.1	125.7	I-10 – El Paso, Sierra Blanca	I-10 exit 78
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

• U.S. Roads portal
• Texas portal

References

External links

Route map: Bing / Google

Geographic data related to Texas State Highway 20 at OpenStreetMap