Tin(II) oxide
Names | |
---|---|
IUPAC name
Tin(II) oxide | |
Other names
Stannous oxide, tin monoxide | |
Identifiers | |
21651-19-4 | |
EC Number | 244-499-5 |
| |
Jmol interactive 3D | Image |
PubChem | 88989 |
RTECS number | XQ3700000 |
| |
Properties | |
SnO | |
Molar mass | 134.709 g/mol |
Appearance | black or red powder when anhydrous, white when hydrated |
Density | 6.45 g/cm3 |
Melting point | 1,080 °C (1,980 °F; 1,350 K)[1] |
insoluble | |
Structure | |
tetragonal | |
Thermochemistry | |
Std molar entropy (S |
56 J·mol−1·K−1[2] |
Std enthalpy of formation (ΔfH |
−285 kJ·mol−1[2] |
Hazards | |
Safety data sheet | ICSC 0956 |
Flash point | Non-flammable |
US health exposure limits (NIOSH): | |
PEL (Permissible) |
none[3] |
REL (Recommended) |
TWA 2 mg/m3[3] |
IDLH (Immediate danger |
N.D.[3] |
Related compounds | |
Other anions |
Tin sulfide Tin selenide Tin telluride |
Other cations |
Carbon monoxide Silicon monoxide Germanium(II) oxide Lead(II) oxide |
Tin dioxide | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
verify (what is ?) | |
Infobox references | |
Tin(II) oxide (stannous oxide) is a compound with the formula SnO. It is composed of tin and oxygen where tin has the oxidation state of +2. There are two forms, a stable blue-black form and a metastable red form.
Preparation and reactions
Blue-black SnO can be produced by heating the tin(II) oxide hydrate, SnO·xH2O (x<1) precipitated when a tin(II) salt is reacted with an alkali hydroxide such as NaOH.[4]
Metastable, red SnO can be prepared by gentle heating of the precipitate produced by the action of aqueous ammonia on a tin(II) salt.[4]
SnO may be prepared as a pure substance in the laboratory, by controlled heating of tin(II) oxalate (stannous oxalate) in the absence of air or under a CO2 atmosphere. This method is also applied to the production of ferrous oxide and manganous oxide.[5][6]
- Sn(COO)2·2H2O → SnO + CO2 + CO + 2 H2O
Tin(II) oxide burns in air with a dim green flame to form SnO2.[4]
- 2 SnO + O2 → 2 SnO2
When heated in an inert atmosphere initially disproportionation occurs giving Sn metal and Sn3O4 which further reacts to give SnO2 and Sn metal.[4]
- 4SnO → Sn3O4 + Sn
- Sn3O4 → 2SnO2 + Sn
SnO is amphoteric, dissolving in strong acid to give tin(II) salts and in strong base to give stannites containing Sn(OH)3−.[4] It can be a dissolves in strong acid solutions to give the ionic complexes Sn(OH2)32+ and Sn(OH)(OH2)2+, and in less acid solutions to give Sn3(OH)42+.[4] Note that anhydrous stannites, e.g. K2Sn2O3, K2SnO2 are also known.[7][8][9] SnO is a reducing agent and this appears to its role in the manufacture of so-called "copper ruby glass".[10]
Structure
Black, α-SnO adopts the tetragonal PbO layer structure containing four coordinate square pyramidal tin atoms.[11] This form is found in nature as the rare mineral romarchite.[12] The asymmetry is usually simply ascribed to a sterically active lone pair; however, electron density calculations show that the asymmetry is caused by an antibonding interaction of the Sn(5s) and the O(2p) orbitals.[13]
Non-stoichiometry has been observed in SnO.[14]
The electronic band gap has been measured between 2.5eV and 3eV.[15]
Uses
The dominant use of stannous oxide is as a precursor in manufacturing of other, typically trivalent, tin compounds or salts. Stannous oxide may also be employed as a reducing agent and in the creation of ruby glass- See "Red Glass Coloration - A Colorimetric and Structural Study" By Torun Bring. Pub. Vaxjo University.Red Glass Coloration - A Colorimetric and Structural Study. . It has a minor use as an esterification catalyst.
Cerium(III) oxide in ceramic form, together with Tin(II) oxide (SnO) is used for illumination with UV light.[16]
References
- ↑ Tin and Inorganic Tin Compounds: Concise International Chemical Assessment Document 65, (2005), World Health Organization
- 1 2 Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. p. A23. ISBN 0-618-94690-X.
- 1 2 3 "NIOSH Pocket Guide to Chemical Hazards #0615". National Institute for Occupational Safety and Health (NIOSH).
- 1 2 3 4 5 6 Egon Wiberg, Arnold Frederick Holleman (2001) Inorganic Chemistry, Elsevier ISBN 0-12-352651-5
- ↑ Satya Prakash (2000),Advanced Inorganic Chemistry: V. 1, S. Chand, ISBN 81-219-0263-0
- ↑ Arthur Sutcliffe (1930) Practical Chemistry for Advanced Students (1949 Ed.), John Murray - London.
- ↑ The First Oxostannate(II): K2Sn2O3, M Braun, R. Hoppe, Angewandte Chemie International Edition in English, 17, 6, 449 - 450, doi:10.1002/anie.197804491
- ↑ Über Oxostannate(II). III. K2Sn2O3, Rb2Sn2O3 und Cs2Sn2O3 - ein Vergleich, R. M. Braun, R. Hoppe, Zeitschrift für anorganische und allgemeine Chemie, 485, 1, 15 - 22, doi:10.1002/zaac.19824850103
- ↑ R M Braun R Hoppe Z. Naturforsch. (1982), 37B, 688-694
- ↑ Colour development in copper ruby alkali silicate glasses. Part I: The impact of tin oxide, time and temperature ,Bring, T., Jonson, B., Kloo, L. Rosdahl, J , Wallenberg, R., Glass Technology, Eur. J. Glass Science & Technology, Part A, 48 , 2 , 101-108 ( 2007)
- ↑ Wells A.F. (1984) Structural Inorganic Chemistry 5th edition Oxford Science Publications ISBN 0-19-855370-6
- ↑ On type romarchite and hydroromarchite from Boundary Falls, Ontario, and notes on other occurrences, Robert A. Ramik,, Robert M. Organ, Joseph A. Mandarino, The Canadian Mineralogist; June 2003; v. 41; no. 3;. 649-657; doi:10.2113/gscanmin.41.3.649
- ↑ Electronic structures of rocksalt, litharge, and herzenbergite SnO by density functional theory, A. Walsh, G.W. Watson, Phys. Rev. B 70, 235114 (2004)doi:10.1103/PhysRevB.70.235114
- ↑ Cation nonstoichiometry in tin-monoxide-phase Sn1-δO with tweed microstructure, Moreno, M. S.; Varela, A.; Otero-Díaz, L. C., Physical Review B (Condensed Matter),56, 9,(1997), 5186-5192, doi:10.1103/PhysRevB.56.5186
- ↑ Science and Technology of Chemiresistor Gas Sensors By Dinesh K. Aswal, Shiv K. Gupta (2006), Nova Publishers, ISBN 1-60021-514-9
- ↑ "Spectral Studies of New Luminophors for Dental Porcelain" (PDF). Jdr.iadrjournals.org. doi:10.1177/00220345800590090801. Retrieved 2012-04-05.
|