Staking (manufacturing)

Staking is the process of connecting two components by creating an interference fit between the two pieces. One workpiece has a hole in it while the other has a boss that fits within the hole. The boss is undersized so that it is a slip fit. A staking punch is then used to compress the boss axially and form an interference fit between the workpieces. This forms a permanent joint.[1]

Thermoplastic staking

Thermoplastic staking, also known as heat staking, is the same process except that it uses heat to deform the plastic boss, instead of cold forming. A plastic stud protruding from one component fits into a hole in the second component. The stud is then deformed through the softening of the plastic to form a head which mechanically locks the two components together. It is a versatile technique benefiting from being quick, economical and consistent. Unlike welding techniques, staking has the capacity to join plastics to other materials (e.g. metal, PCB's) in addition to joining like or dissimilar plastics and it has the advantage over other mechanical joining methods in eliminating the need for consumables such as rivets and screws.

Technology

Thermoplastic staking can be performed with a wide variety of technologies including:

References

  1. ↑ Degarmo, pp. 415–416.

Bibliography

Further reading

This article is issued from Wikipedia - version of the Tuesday, December 08, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.