St Lawrence (Isle of Wight) railway station

St Lawrence
Location
Place St Lawrence
Area Isle of Wight
Operations
Pre-grouping Newport, Godshill & St Lawrence Railway (1897-1913)
Isle of Wight Central Railway (1913 to 1923)
Post-grouping Southern Railway (1923 to 1948)
Southern Region of British Railways (1948 to 1952)
Platforms One
History
20 July 1897 Opened
15 September 1952 Closed
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z
UK Railways portal
A 1914 Railway Clearing House map of lines around The Isle of Wight.

St Lawrence railway station was the original terminus of the branch from Merstone until the 1½ mile extension to Ventnor was completed in June 1900. From 1927 the station was downgraded to the status of an unstaffed halt.

Location

The station was located between a steep cliff face and a public road. During the early years of the line's operation, rock falls were common. This problem was alleviated when the undergrowth took hold on the cliff face.

The short distance between the south portal of the St. Lawrence tunnel and the station was widely regarded as one of the finest views to be had on the island's railways.

Today the station building still stands but is in a poor state of repair. The trackbed has been filled in up to the level of the platform. The steep road bridge crossing at the eastern end of the station is still evident. The trackbed towards Ventnor is now covered by modern housing.

Preceding station Disused railways Following station
Ventnor West   British Railways
Southern Region

IoW CR : Ventnor West branch line
  Whitwell

Other stations on the branch

Main article: Ventnor West branch

The other stations on the Ventnor West branch were:

External links

Coordinates: 50°35′15″N 1°14′45″W / 50.5874°N 1.2457°W / 50.5874; -1.2457


This article is issued from Wikipedia - version of the Sunday, December 28, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.