South African Class FC 2-6-2+2-6-2

South African Class FC 2-6-2+2-6-2

Class FC no. 2310, later renumbered 670, as depicted on a SAR Museum playing card
Type and origin
Power type Steam
Designer North British Locomotive Company
Builder North British Locomotive Company
Serial number 23140
Model Class FC
Build date 1924
Total produced 1
Specifications
Configuration 2-6-2+2-6-2 "Double Prairie" Modified Fairlie
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia 28.5 in (724 mm)
Driver diameter 42.25 in (1,073 mm)
Trailing dia 28.5 in (724 mm)
Wheelbase Total: 56 ft 8 in (17,272 mm)
Engines:
8 ft (2,438 mm) coupled
17 ft 8.25 in (5,391 mm) total
Length 63 ft 9 in (19,431 mm)
Height 12 ft 3 in (3,734 mm)
Frame Plate frame, 35 ft 8 in (10,871 mm) between pivot centres
Axle load 10.5 long tons (10.7 t) on all but 5th driver
Adhesive weight 62.9 long tons (63.9 t)
Loco weight 99.7 long tons (101.3 t) w/o
Fuel type Coal
Fuel capacity 5 long tons (5.1 t)
Water cap 2,080 imp gal (9,500 l) front
920 imp gal (4,200 l) rear
Firebox:
  Firegrate area
34 sq ft (3.159 m2)
Boiler 5 ft 1.75 in (1,568 mm) inside diameter
11 ft 3.375 in (3,439 mm) inside length
7 ft 3 in (2,210 mm) pitch
Boiler pressure 180 psi (1,240 kPa)
Heating surface 1,387 sq ft (128.857 m2)
  Tubes 143 tubes 2 in (51 mm) diameter
24 tubes 5.5 in (140 mm) diameter
1,232 sq ft (114.457 m2)
  Firebox 155 sq ft (14.400 m2)
Superheater:
  Heating area
280 sq ft (26.013 m2)
Cylinders Four
Cylinder size 14 in (356 mm) bore
23 in (584 mm) stroke
Valve gear Walschaerts
Performance figures
Tractive effort 28,470 lbf (127 kN) at 75% pressure
Career
Operators South African Railways
Class Class FC
Number in class 1
Numbers 2310, renumbered 670
Delivered 1924
First run 1924
Withdrawn 1939

Error in template * unknown parameter name (Template:Infobox_locomotive): 'framesize'

The South African Railways Class FC 2-6-2+2-6-2 of 1924 is an articulated steam locomotive.

In 1924 the South African Railways placed a single experimental Class FC Modified Fairlie articulated steam locomotive with a 2-6-2+2-6-2 Double Prairie type wheel arrangement in service.[1][2]

Manufacturer

The sole Class FC Modified Fairlie locomotive was designed and built for the South African Railways (SAR) by the North British Locomotive Company (NBL) in 1924. It was numbered 2310 upon delivery, but it was later renumbered to 670.[1][2][3]

The Fairlie locomotive

The Fairlie locomotive was invented and patented in 1864 by the Scottish engineer Robert Francis Fairlie.[4]

Double Fairlie

The first Fairlie locomotives later became known as Double Fairlies. In general appearance, most of them were reminiscent of the German built Zwillinge that saw service on the narrow gauge lines in South West Africa and other German territories. However, while the Zwillinge were pairs of individual locomotives that were semi-permanently coupled back-to-back, the Double Fairlie was a single locomotive with either a double-ended boiler or two separate boilers, with smokeboxes at each end, a central firebox and a central cab, all mounted on one rigid frame. It ran on two swiveling engine units or powered bogies, similar to those of a Garratt locomotive, with the cylinders on each engine unit at the respective locomotive ends. Couplers, buffers and, where they were in use, cowcatchers were mounted on the engine unit bogies so that they could more accurately follow the curvature of the track.[4]

Single Fairlie

A variation of the Fairlie concept was the Single Fairlie, also known as the Mason Fairlie. It had one boiler, a cab at one end, a single engine unit or powered bogie under the boiler and an unpowered bogie under the cab. This design, essentially half a Double Fairlie, retained the ability to negotiate sharp curves and, while it abandoned the bidirectional nature of the Double Fairlie, it regained the ability of conventional locomotives to have a large water and coal bunker behind the cab and to use a trailing tender if necessary.[4]

Early Single Fairlies were similar in appearance to conventional tank locomotives, while later models were similar in appearance to conventional tender locomotives. They differed by virtue of the fact that the whole engine and bunker or tender combination was mounted on a single rigid frame, with the swiveling engine unit mounted under the boiler and the unpowered bogie under the bunker or tender. It was developed by William Mason in the United States, where the type became known as the Mason Bogie.[4]

Modified Fairlie

The Modified Fairlie was first introduced in South Africa. In 1924 Colonel F.R. Collins, the Chief Mechanical Engineer (CME) of the SAR from 1922 to 1929 who displayed a distinct preference for articulated locomotives, was authorised to experiment with a modified type of Fairlie locomotive with a 2-6-2+2-6-2 Double Prairie type wheel arrangement. The objective was to compare the concept to that of the Garratt locomotive in terms of actual performance and maintenance requirements.[1][2][4]

The result was the Class FC Modified Fairlie, which was in essence an adaptation of the Kitson-Meyer concept. It was similar in appearance to a Garratt, but with the boiler, cab, coal and water bunkers all mounted on a single rigid frame which pivoted on the engine units, with the pivot centres located approximately at the centre of the coupled wheelbase of each engine unit. In the Garratt design, by comparison, the coal and water bunkers are mounted directly on the engine units and swivel with them, while the boiler, firebox and cab are mounted on a rigid frame that is suspended between the two engine units.[1][2][4][5]

Characteristics

The Class FC had Walschaerts valve gear, a plate frame and was superheated. The aim with the experimental locomotive was to compare the performance and maintenance requirements of the Modified Fairlie to that of a Garratt, in particular to the Class GC 2-6-2+2-6-2 Double Prairie type Garratt which was similar in both size and mechanical respects. Hence, also, the experimental Modified Fairlie’s Class FC designation.[2]

Service

The locomotive was placed in service on the Cape Midlands System. While it gave good service, it was not outstanding and proved to be not as successful as the Garratt. The 63 feet (19.2 metres) long frame resulted in severe overhang on sharp curves and was also subject to metal fatigue. The pivot bearings, which carried a considerable additional load compared to those on the Garratt as a result of the water and coal bunkers that were mounted on the frame instead of on the engine units, were also subject to quite rapid wear and resulted in increased maintenance and, as a consequence, increased operating cost.[1][2][5]

No more of the Class FC locomotives were ordered. The locomotive was scrapped in 1939 after a comparatively short service life of only fifteen years.[1][2]

References

  1. 1 2 3 4 5 6 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 44–45. ISBN 978-0-7153-5427-8.
  2. 1 2 3 4 5 6 7 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 97. ISBN 0869772112.
  3. North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  4. 1 2 3 4 5 6 The Fairlie locomotive
  5. 1 2 Durrant, A E (1989). Twilight of South African Steam (1st ed.). Newton Abbott, London: David & Charles. p. 31. ISBN 0715386387.
Wikimedia Commons has media related to South African Class FC (2-6-2+2-6-2).
This article is issued from Wikipedia - version of the Thursday, November 05, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.