Suppressor

Several firearms with detachable suppressors, from top to bottom: An Uzi, An AR-15, A Heckler & Koch USP Tactical, A Beretta 92FS, and a SIG Mosquito
CZ 452 bolt-action rimfire rifle with suppressor
AWM-F sniper rifle with attached suppressor
Integral suppressor on VSS Vintorez sniper rifle and AS Val assault rifle

A suppressor, sound suppressor, sound moderator, or silencer is a device attached to or part of the barrel of a firearm or air gun which reduces the amount of noise and visible muzzle flash generated by firing. Suppressors are typically constructed of a metal cylinder with internal mechanisms to reduce the sound of firing by slowing the escaping propellant gas and can also slightly increase the speed of the bullet.[1][2]

In most countries, suppressors are regulated by firearm legislation to varying degrees. While some have allowed for sporting use of suppressors (especially to mitigate the costs of hearing loss and noise pollution), other governments have opted to ban them from civilian use.

History

American inventor Hiram Percy Maxim, the son of Maxim gun inventor Hiram Stevens Maxim, is usually credited with inventing and selling the first commercially successful models circa 1902 (patented 30 March 1909).[3] Maxim gave his device the trademarked name Maxim Silencer, and they were regularly advertised in sporting goods magazines.[4] The muffler for internal combustion engines was developed in parallel with the firearm suppressor by Maxim in the early 20th century, using many of the same techniques to provide quieter-running engines (in many English-speaking countries automobile mufflers are still called silencers).[5] Former president of the United States Theodore Roosevelt was known to purchase and use Maxim Silencers.[6]

Suppressors were regularly used by agents of the United States Office of Strategic Services, who favored the newly designed High Standard HDM .22 Long Rifle pistol during World War II. OSS Director William Joseph "Wild Bill" Donovan demonstrated the pistol for President Franklin D. Roosevelt at the White House. According to OSS research chief Stanley Lovell,[7] Donovan (an old and trusted friend of the President) was waved into the Oval Office, where Roosevelt was dictating a letter. While Roosevelt finished his message, Donovan turned his back and fired ten shots into a sandbag he had brought with him, announced what he had done and handed the smoking gun to the astonished president.[8] The British SOE (Special Operations Executive) Welrod pistol with an integral suppressor was also used by the American OSS on clandestine operations in Nazi occupied Europe during the Second World War.[9]

Both the United States Department of Justice and the ATF (Bureau of Alcohol, Tobacco, Firearms and Explosive) refer to suppressors as "silencers".[10] Additionally, Hiram Percy Maxim (the original inventor of the device) marketed them as "Maxim Silencers".[11]

Purpose

When a firearm is discharged, there are three ways sound is produced. Part of it can be managed; however, some of it is beyond the ability of the operator or manufacturers to eliminate.

In order of importance, the three ways a firearm generates sound are:

A suppressor can only affect the noise generated by the two primary sources—muzzle blast and sonic boom—and in most cases only the former. While subsonic ammunition can negate the sonic boom, mechanical noise can be mitigated but is nearly impossible to eliminate. For these reasons, it is difficult to completely silence any firearm, or achieve an acceptable level of noise suppression in revolvers that function under standard operating principles. Some revolvers have technical features that enable suppression and include the Russian Nagant M1895 and OTs-38 revolvers, and the S&W QSPR.

Muzzle blast generated by discharge is directly proportional to the amount of propellent contained within the cartridge. Therefore, the greater the case capacity the larger muzzle blast and consequently a more efficient or larger system is required. A gunshot (the combination of the sonic boom, the vacuum release, and hot gases) will almost always be louder than the sound of the action cycling of an auto-loading firearm. Alan C. Paulson, a renowned firearms specialist, claimed to have encountered an integrally suppressed .22 LR that had such a quiet report,[12] although this is somewhat uncommon. Properly evaluating the sound generated by a firearm can only be done using a decibel meter in conjunction with a frequency spectrum analyser during live tests.

Design and construction

Cross-section drawing of a BR Tuote rifle suppressor, showing expansion chamber "reflexed" (going back around) the rifle barrel, and four baffles. The diffractor and baffles are carefully shaped to deflect gas
Cross-section drawing of a Vaime .22 caliber rifle suppressor, showing short expansion chamber and thirteen plastic baffles. These baffles use alternating angled flat surfaces to repeatedly deflect gas expanding through the suppressor. In the actual suppressor, the baffles are oriented at 90 degrees to each other about the axis of bullet travel (the illustration cannot demonstrate this well)
Cross-section drawing of a US Navy Hush Puppy Mk 2 pistol suppressor, showing expansion chamber wrapped around inner suppressor assembly, and four wipes. The bullet pushes a bullet-diameter hole through the wipes, trapping propellant gas behind it entirely until the bullet has passed through the wipe completely
Cross section diagram of Heckler & Koch MP5SD early model suppressor, from H&K 1971 patent. Vented barrel surrounded by metal mesh packing in expansion chambers, followed by conical baffles in forward chambers

The suppressor is typically a hollow metal tube manufactured from steel, aluminium, or titanium and contains expansion chambers. This device, typically cylindrical in shape, attaches to the muzzle of a pistol, submachine gun, or rifle. Some "can"-type suppressors (so-called as they often resemble a beverage can), may be detached by the user and attached to a different firearm. Another type is the "integral" suppressor, which typically consists of an expansion chamber or chambers surrounding the barrel. The barrel has openings or "ports" which bleed off gases into the chambers. This type of suppressor is part of the firearm (thus the term "integral"), and maintenance of the suppressor requires that the firearm be at least partially disassembled.[13]

Huntertown Kestrel 5.56 firearm suppressor disassembled to show blast chamber, baffles, and sections of the outer tube

Both types of suppressors reduce noise by allowing the rapidly expanding gases from the firing of the cartridge to be decelerated and cooled through a series of hollow chambers. The trapped gas exits the suppressor over a longer period of time and at a greatly reduced velocity, producing less noise signature. The chambers are divided by either baffles or wipes. There are typically at least four and up to perhaps fifteen chambers in a suppressor, depending on the intended use and design details. Often, a single, larger expansion chamber is located at the muzzle end of a can-type suppressor, which allows the propellant gas to expand considerably and slow down before it encounters the baffles or wipes. This larger chamber may be "reflexed" toward the rear of the barrel to minimize the overall length of the combined firearm and suppressor, especially with longer weapons such as rifles.

Suppressors vary greatly in size and efficiency. One disposable type developed in the 1980s by the U.S. Navy for 9×19mm pistols was 150 mm (5.9 in) long and 45 mm (1.8 in) in outside diameter, and was designed for six shots with standard ammunition or up to thirty shots with subsonic (slower than the speed of sound) ammunition. In contrast, one suppressor designed for rifles firing the powerful .50 caliber (BMG) cartridge is 509 mm (20.0 in) long and 76 mm (3.0 in) in diameter.[14]

Two ancillary advantages to the suppressor are recoil reduction and flash suppression. Muzzle flash is reduced by both being contained in the suppressor and through the arresting of unburned powder that would normally burn in the air, adding to the flash. Recoil reduction results from the slowing of propellant gasses, which can contribute 30–50% of recoil velocity. The weight of suppressor and the location of that additional weight at the muzzle reduce recoil through basic mass as well as muzzle flip due to the location of this mass.

Baffles and Spacers

Baffles are usually circular metal dividers which separate the expansion chambers. Each baffle has a hole in its center to permit the passage of the bullet through the suppressor and towards the target. The hole is typically at least 1 mm larger than the bullet caliber to minimize the risk of the bullet hitting the baffle in what is known as a "baffle strike". Baffles are typically made of stainless steel, aluminium, titanium, or alloys such as Inconel, and are either machined out of solid metal or stamped out of sheet metal. A few suppressors for low-powered cartridges such as the .22 Long Rifle have successfully used plastic baffles (certain models by Vaime and others.)[1]

There are several unique baffle designs. M, K, Z, monolithic core[15] and Ω (Omega) are the most prevalent. M-type is the crudest and composes an inverted cone. K forms slanted obstructions diverging from the sidewalls, creating turbulence across the boreline. Z is expensive to machine and includes "pockets" of dead airspace along the sidewalls which trap expanded gases and hold them thereby lengthening the time that the gases cool before exiting. Omega forms a series of spaced cones drawing gas away from the boreline, incorporates a scalloped mouth creating cross-bore turbulence, which is in turn directed to a "mouse-hole" opening between the baffle stack and sidewall.

Propellant gas heats and erodes the baffles, causing wear, which is worsened by high rates of fire. Aluminium baffles are seldom used with fully automatic weapons, because service life is unacceptably short. Some modern suppressors using steel or high-temperature alloy baffles can endure extended periods of fully automatic fire without damage. The highest-quality rifle suppressors available today have a claimed service life of greater than 30,000 rounds.[1] Baffles have not been given any specific angles, a specific size, or weight to meet any standards; they are created on a trial and error basis.[16]

Spacers separate baffles and keep them aligned at a specified distance from each other inside the suppressor. Many baffles and spacers are manufactured as a single assembly and several suppressor designs have all the baffles attached together with spacers as a one-piece helical baffle stack. Modern baffles are usually carefully shaped to divert the propellant gases effectively into the chambers. This shaping can be a slanted flat surface, canted at an angle to the bore, or a conical or otherwise curved surface. One popular technique is to have alternating angled surfaces through the stack of baffles.[16]

Wipes and packing material

Wipes are inner dividers intended to touch the bullet as it passes through the suppressor, and are typically made of rubber, plastic, or foam. Each wipe may either have a hole drilled in it before use, a pattern stamped into its surface at the point where the bullet will strike it, or it may simply be punched through by the bullet. Wipes typically last for a small number of firings (perhaps no more than five) before their performance is significantly degraded. While many suppressors used wipes in the Vietnam War era, most modern suppressors do not use them as anything that touches the projectile has significant accuracy implications. All "wipes" deteriorate quickly and require disassembly and spare parts replacement.[17]

"Wet" suppressors or "wet cans" use a small quantity of water, oil, grease, or gel in the expansion chambers to cool the propellant gases and reduce their volume (see ideal gas law). The coolant lasts only a few shots before it must be replenished, but can greatly increase the effectiveness of the suppressor. Water is most effective, due to its high heat of vaporization, but it can run or evaporate out of the suppressor. Grease, while messier and less effective than water, can be left in the suppressor indefinitely without losing effectiveness. Oil is the least effective and least preferable, as it runs while being as messy as grease, and leaves behind a fine mist of aerosolized oil after each shot. Water-based gels, such as wire-pulling lubricant gel, are a good compromise; they offer the efficacy of water with less mess, as they do not run or drip. However, they take longer to apply, as they must be cleared from the bore of the suppressor to ensure a clear path for the bullet (grease requires this step as well). Generally, only pistol suppressors are shot wet, as rifle suppressors handle such high pressure and heat that the liquid is gone within 1–3 shots. Many manufacturers will not warranty their rifle suppressors for "wet" fire, as some feel this may even result in a dangerous over-pressurization of the silencer.[16]

Packing materials such as metal mesh, steel wool, or metal washers may be used to fill the chambers and further dissipate and cool the gases. These are somewhat more effective than empty chambers, but less effective than wet designs.[1] Metal mesh, if properly used, may last for hundreds or thousands of shots of spaced semi-automatic fire, however steel wool usually degrades within ten shots with stainless wool lasting longer than regular steel wool. Like wipes, packing materials are rarely found in modern suppressors.[16]

Wipes, packing materials and purpose-designed wet cans have been generally abandoned in 21st-century suppressor design because they decrease overall accuracy and require excessive cleaning and maintenance.[17] The instructions from several manufacturers state that their suppressors need not be cleaned at all. Furthermore, legal changes in the United States during the 1980s and 1990s made it much more difficult for end-users to legally replace internal silencer parts, and the newer designs reflect this reality.[18]

Attachment

Apart from integral suppressors which are integrated as a part of the firearm's barrel, most suppressors have a "female" threaded end, which attaches to "male" threads cut into the exterior of the barrel. These types of suppressors are mostly used on handguns and rifles chambered in .22LR. More powerful rifles may use this type of attachment, but harsh recoil may cause the suppressor to over-tighten to the barrel and the suppressor can become difficult to remove.[16]

Military rifles such as the M16 or M14 often utilize "quick-detach" suppressors which use coarser than normal threads and are installed over an existing muzzle device such as a flash suppressor and may include a secondary locking mechanism to allow the shooter to quickly and safely add or remove a sound suppressor based on individual needs.[16]

Advanced types

SilencerCo Osprey .45 suppressor on a Springfield pistol

In addition to containing and slowly releasing the gas pressure associated with muzzle blast or reducing pressure through the use of coolant mediums, advanced suppressor designs attempt to modify the properties of the sound waves generated by the muzzle blast. In these designs, effects known as frequency shifting and phase cancellation (or destructive interference) are used in an attempt to make the suppressor quieter. These effects are achieved by separating the flow of gases and causing them to collide with each other or by venting them through precision-made holes. The intended effect of frequency shifting is to shift audible sound waves frequencies into ultrasound (above 20 kHz), beyond the range of human hearing. The Russian AN-94 assault rifle features a muzzle attachment that claims apparent noise reduction by venting some gases through a "dog-whistle" type channel. Phase cancellation occurs when similar sound waves encounter each other 180° out of phase, cancelling the amplitude of the wave and eliminating the pressure variations perceived as sound.

Using either property to advantage requires that the suppressor be designed within the specification of the muzzle blast in mind. For example, the velocity of the sound waves is a major factor. This figure can change significantly between different cartridges and barrel lengths.

However, these concepts are controversial because muzzle blast creates broadband noise rather than pure tones, and phase cancellation in particular is therefore extremely difficult (if not impossible) to achieve. Some suppressor manufacturers claim to use phase cancellation in their designs.[19]

From the practical perspective, supersonic cartridge loads are impractical to suppress past the levels that are merely hearing-safe for the shooter due to the sonic boom emitted by the bullet, and cartridges such as .22 LR and .45 ACP have long been recognized as the easiest to suppress even if using technology dating back to 1940s.[20][21]

Characteristics

Rear of a suppressor with the Nielsen device protruding (completely assembled)
Retaining ring unscrewed and Nielsen device partially removed
Nielsen device completely removed and disassembled
Rear of suppressor showing the rotational indexing system incorporated into some Nielsen devices

No firearm can be made completely silent.[1] Functionally, a suppressor is meant to diminish the report of a discharged round, or make its sound unrecognizable. Other sounds emanating from the weapon remain unchanged. Even subsonic bullets make distinct sounds by their passage through the air and striking targets, and supersonic bullets produce a small sonic boom, resulting in a "ballistic crack". Semi-automatic and fully automatic firearms also make distinct noises as their actions cycle, ejecting the fired cartridge case and loading a new round.

Aside from reductions in volume, suppressors also tend to alter the sound to something that is not identifiable as a gunshot.[22] This reduces or eliminates attention drawn to the shooter (hence the Finnish expression: "A suppressor does not make a marksman silent, but it does make him invisible").[19] This is especially true in cases where there are other sources of ambient noise, such as in an urban environment. Suppressors are particularly useful in enclosed spaces where the sound, flash and pressure effects of a weapon being fired are amplified. Such effects may disorient the shooter, affecting situational awareness, concentration and accuracy, and can permanently damage hearing very quickly.[23]

As the suppressed sound of firing is overshadowed by ballistic crack, observers can be deceived as to the location of the shooter, often from 90 to 180 degrees from his actual location. However, counter-sniper tactics can include gunfire locators, where sensitive microphones are coupled to computers running algorithms, and use the ballistic crack to detect and localize the origin of the shot. The U.S. Boomerang system is one such example.

There are many advantages in using a suppressor that are not related to the sound.

Hunters using centerfire rifles find suppressors bring various important benefits that outweigh the extra weight and resulting change in the firearm's center of gravity. The most important advantage of a suppressor is the hearing protection for the shooter as well as his/her companions. Many hunters have suffered permanent hearing damage due to someone else firing a high-caliber gun too closely without warning. By reducing noise, recoil and muzzle-blast, it also enables the firer to follow through calmly on his first shot and fire a further carefully aimed shot without delay if necessary. Wildlife of all kinds are often confused as to the direction of the source of a well-suppressed shot. In the field, however, the comparatively large size of a centerfire rifle suppressor can cause unwanted noise if it bumps or rubs against vegetation or rocks, so many users cover them with neoprene sleeves.[24]

Suppressors reduce firing recoil significantly, primarily by diverting and trapping the propellant gas. The gas generally has much less mass than the projectile, but it exits the muzzle at multiples of the projectile velocity, so reducing the speed and quantity of the gas expelled can significantly reduce the total momentum of the matter (gas and projectile) leaving the barrel, the negation of which, because momentum is conserved, is transferred to the gun as recoil. Paulson et al., discussing low-velocity pistol calibers, suggest the recoil reduction is around 15%.[1] With high-velocity calibers, recoil reduction runs in the range of 20–30%.[25] The added mass of the suppressor—normally 300 to 500 grams—also helps to manage the recoil.

A suppressor also cools the hot gases coming out of the barrel enough that most of the lead-laced vapor that leaves the barrel condenses inside the suppressor, reducing the amount of lead that might be inhaled by the shooter and others around them. However, in auto-loading actions this might be offset by increased back pressure which results in propellant gas blowing back into a shooter's face through the chamber during case ejection.[26]

Subsonic ammunition

In weapons firing supersonic bullets, the supersonic bullet itself produces a loud and very sharp sound as it leaves the muzzle in excess of the speed of sound and gradually reducing speed as it travels downrange. This is a small sonic boom, and is referred to in the firearm field as "ballistic crack" or "sonic signature". Subsonic ammunition eliminates this sound, but at the cost of lower velocity, resulting in decreased range and much decreased muzzle energy, thus lessening effectiveness on the target. For example, if the muzzle velocity is reduced from 820 m/s (common for f.ex. .308 Winchester) to a subsonic 290 m/s, the muzzle energy is reduced by a factor of 8. Military marksmen and police units may use this ammunition to maximize the effectiveness of their suppressed rifles. While the range may be decreased when using subsonic rounds, this may be acceptable for specialized situations, where the absolute minimum amount of noise is required.[27]

However, the numeric effectiveness of subsonic rounds is, again, misrepresented by media.[17] Independent testing of commercially available firearm suppressors with commercially available subsonic rounds has found that .308 subsonic rounds decreased the volume at the muzzle 10 to 12 dB when compared to the same caliber of suppressed supersonic ammunition.[28] When combined with suppressors, the subsonic .308 rounds metered between 121 and 137 dB.

This ballistic crack depends on the speed of sound, which in turn depends mainly on air temperature. At sea level, an ambient temperature of 70 °F (21 °C), and under normal atmospheric conditions, the speed of sound is approximately 1,140 feet per second (350 m/s). Bullets that travel near the speed of sound are considered transonic, which means that the airflow over the surface of the bullet, which at points travels faster than the bullet itself, can break the speed of sound. Pointed bullets which gradually displace air can get closer to the speed of sound than round nosed bullets before becoming transonic.

Special cartridges have been developed for use with a suppressor. These cartridges use very heavy bullets to make up for the energy lost by keeping the bullet subsonic. A good example of this is the .300 Whisper cartridge, which is formed from a necked-up .221 Remington Fireball cartridge case. The subsonic .300 Whisper fires up to a 250 grains (16 g), .30 caliber bullet at about 980 feet per second (300 m/s), generating about 533 foot-pounds force (723 J) of energy at the muzzle. While this is similar to the energy available from the .45 ACP pistol cartridge, the reduced diameter and streamlined shape of the heavy .30 caliber bullet provides far better external ballistic performance, improving range substantially.

9×19mm Parabellum, a very popular caliber for suppressed shooting, can use almost any factory-loaded 147 grains (9.5 g) weight round to achieve subsonic performance. These 147 gr weight bullets typically have a velocity of 900–980 feet per second (270–300 m/s), which is less than the common 1,140 feet per second (350 m/s) speed of sound.[29]

The Soviet / Russian armor-piercing 9×39mm ammunition used in for example AS Val has a high subsonic ballistic coefficient, high retained downrange energy, high sectional density, and moderate recoil. All elements combined make this a very attractive choice for close-quarters combat (CQC) firearms.[30]

Instead of using subsonic ammunition, one can lower the muzzle velocity of a supersonic bullet before it leaves the barrel. Some suppressor designs, referred to as "integrals", do this by allowing gas to bleed off along the length of the barrel before the projectile exits. The MP5SD is the best example of this with holes right after the chamber of the barrel used to reduce a regular 115 or 124 gr ammunition to subsonic velocities.[13]

Effectiveness

Firearm suppressors including the SilencerCo Osprey 9, SWR Octane 45, and SilencerCo Saker 5.56

Live tests by independent reviewers of numerous commercially available suppressors find that even low-power, unsuppressed .22 LR handguns produce gunshots over 160 decibels.[28] In testing, most of the suppressors reduced the volume to between 130 and 145 dB, with the quietest suppressors metering at 117 dB. The actual suppression of sound ranged from 14.3 to 43 dB, with most data points around the 30 dB mark. A notable example is the De Lisle carbine, a British World War II suppressed rifle used in small numbers by Special Forces. This was recorded at 85.5 dB in official firing tests.[31]

Comparatively, ear protection commonly used while shooting provides 18 to 32 dB of sound reduction at the ear.[32] Further, chainsaws, rock concerts, rocket engines, pneumatic drills, small firecrackers, and ambulance sirens are rated at 100 to 140 dB.[33]

While some consider the noise reduction of a suppressor significant enough to permit safe shooting without hearing protection ("hearing safe"), noise-induced hearing loss may occur at 85 time-weighted-average decibels or above if exposed for a prolonged period,[34] and suppressed gunshots regularly meter above 130 dB. However, the U.S. Occupational Safety and Health Administration uses 140 dB as the "safety cutoff" for impulsive noise, which has led most U.S. manufacturers to advertise sub-140 dB suppressors as "hearing safe". Current OSHA standards would allow no more than sub-single-second exposure to impact noise over 130 dB per 24 hours. That would equate to a single .308 round fired through a very efficient suppressor. This result effectively requires all users of suppressors to wear additional ear protection.

Decibel testing measures only the peak sound "pressure" noise, not duration or frequency. Limitations of dB testing become apparent in a comparison of sound between a .308 caliber rifle and a .300 Winchester Magnum rifle. The dB meter will show that both rifles produce the same decibel level of noise. Upon firing these rifles, however, it is clear that the .300 Winchester Magnum sounds much louder. What a dB meter does not show is that, although both rifles produce the same peak sound pressure level (SPL), the .300 Winchester Magnum holds its peak duration longer—meaning that the .300 Winchester Magnum sound remains at full value longer, while the .308 peaks and falls off more quickly. Decibel meters fail in this and other regards when being used as the principal means to determine suppressor capability. In a physical sense, dB meters essentially take a short-time average (RMS intensity of a sonic signal or impulse) over a specified period of time (sampling rate), and do not take into account the rate of increase of the sound wave packet (first derivative of packet envelope), which would in practice provide a better sense of the human perception of sound.[35]

Regulation

Legal regulation of suppressors varies widely around the world. In some nations, such as Finland, Norway and France, some or all types of suppressor are essentially unregulated and may be bought "over the counter" in retail stores or by mail-order, as they are considered a great help, along with hearing protection, to preserve the hearing of the user and any onlookers.[2]

Asia

Europe

North America

Canada

In Canada, a device to muffle or stop the sound of a firearm is a "prohibited device" under the Criminal Code.[39] A prohibited device is not inherently illegal in Canada but it does require an uncommon and very specific prohibited device license for its possession, use, and transport. Suppressors cannot be imported into the country by civilians;[40] special licensing is required for businesses to import and sell suppressors, and they are typically only available to law enforcement, conservation agencies, and the military.

United States

In the United States, taxes and strict regulations affect the manufacture and sale of suppressors under the National Firearms Act. They are legal for individuals to possess and use for lawful purposes in 41 of the 50 states.[41] However, a prospective user must go through an application process administered by the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), which requires a federal tax payment of $200 and a thorough criminal background check. The tax payment buys a revenue stamp, which is the legal document allowing possession of a suppressor. The use of a gun trust to register with the BATFE has become an increasingly popular method of acquisition and ownership of silencers.[42] The following jurisdictions have explicitly banned any civilian from possessing a suppressor: California, Delaware, Hawaii, Illinois, Iowa, Massachusetts, New Jersey, New York, Rhode Island,[43] and the District of Columbia. The federal legal requirements to manufacture a suppressor in the United States are enumerated in Title 26, Chapter 53 of the United States Code.[44] The individual states and several municipalities also have their specific requirements. Federal law provides severe penalties for crimes of violence committed using firearms equipped with silencers: a minimum prison sentence of 30 years.[45]

In October, 2015 Arizona Congressman Matt Salmon introduced the Hearing Protection Act to remove suppressors from the NFA. [46]

Oceania

See also

References

  1. 1 2 3 4 5 6 Paulson, Alan C (1996). Silencer History and Performance, Vol 1: Sporting And Tactical Silencers. Paladin Press. ISBN 0-87364-909-5.
  2. 1 2 3 Paulson, Alan C; Kokalis, Peter G., and Parker, N.R. (2002). Silencer History and Performance, Vol 2: CQB, Assault Rifle, and Sniper Technology. Paladin Press. ISBN 1-58160-323-1.
  3. "US Patent 958935 - Google Patents". Google.
  4. Gage (1913). Electrical Record and Buyer's Reference. New York: Buyers' Reference Company. p. 53.
  5. Goddard, Stephen B. (11 November 2000). Colonel Albert Pope and His American Dream Machines: The Life and Times of a Bicycle Tycoon Turned Automotive Pioneer. McFarland. p. 227. ISBN 978-1-4766-1334-5.
  6. Boorman, Dean K. (2001). The History of Winchester Firearms. Globe Pequot Press. p. 74. ISBN 978-1-58574-307-0.
  7. Stanley Lovell (1963), Of Spies and Stratagems, Englewood Cliffs, NJ: Prentice-Hall. Lovell claimed that a weapon so quiet would be more efficient than any death ray.
  8. Kessler, Ronald (1994). Inside the CIA. New York: Simon and Schuster. p. 187. ISBN 978-0-671-73458-9.
  9. Bull, Stephen (1 January 2004). Encyclopedia of Military Technology and Innovation. Greenwood Publishing Group. p. 237. ISBN 978-1-57356-557-8.
  10. "Bureau of Alcohol, Tobacco, Firearms and Explosives, Silencer FAQ". Retrieved 2011-03-22.
  11. Greener, W. W. (1 October 2002). The Gun and Its Development. Lyons Press. p. 9. ISBN 978-1-58574-734-4.
  12. Silencer: History and Performance, Volume 1 by Alan C. Paulson
  13. 1 2 Heard, Brian J. (17 August 2011). Handbook of Firearms and Ballistics: Examining and Interpreting Forensic Evidence. John Wiley & Sons. p. 40. ISBN 978-1-119-96477-3.
  14. "Reflex Suppressor for Barrett M82A1 - BR Reflex Suppressors (Finland)". Guns.connect.fi. Retrieved 2009-03-09.
  15. "Suppressors - Silencers - SilencerCo". SilencerCo.
  16. 1 2 3 4 5 6 Walker, Robert E. Cartridges and Firearm Identification. Fort Myers, Florida: CRC Press. pp. 210–214, 295. ISBN 978-1-4665-8881-3.
  17. 1 2 3 Dockery, Kevin (2007). Stalkers and Shooters: A History of Snipers. New York: Penguin Group US. pp. 218–224. ISBN 978-1-4406-2890-0. Retrieved 8 August 2013.
  18. United States, Tobacco Bureau of Alcohol, and Firearms, Firearms Programs Division, Tobacco Bureau of Alcohol, Firearms and Explosives. Federal Firearms Regulations Reference Guide. DIANE Publishing. p. 176. ISBN 978-1-4289-5186-0. Retrieved 8 August 2013.
  19. 1 2 Webb, Brandon; Doherty, Glen (15 September 2010). 21st Century Sniper: The Complete Guide. Skyhorse Publishing Inc. pp. 71–72. ISBN 978-1-61608-001-3.
  20. .22 and .45 as easy to suppress ammunition
  21. "Sound Suppressors on High-Powered Rifles". connect.fi.
  22. Dougherty, Martin J. (2012). SAS and Elite Forces Guide Sniper: Sniping Skills from the World's Elite Forces. Lyons Press. pp. 43–44. ISBN 978-0-7627-8876-7.
  23. Dater, Philip; Dockery, Kevin (July 2007). "28". Stalkers and Shooters: A History of Snipers. BERKLEY Publishing Group. pp. 228–235. ISBN 978-0-425-21542-5.
  24. Mann, Richard A. (30 April 2014). Gun Digest Shooter's Guide to the AR-15. Iola, Wisconsin: Krause Publications. pp. 232–233. ISBN 978-1-4402-3847-5.
  25. White, Mark (1998). "The Use of Sound Suppressors on High-Powered Rifles". Small Arms Review Vol. 1 No 7-9.
  26. Emptormaven. "Rethinking Direct Impingement". Retrieved 4 March 2014.
  27. "Modern sniper rifles". world.guns.ru. 2001-01-26. Retrieved 2009-03-09.
  28. 1 2 Silvers, Robert (2005). "Results". Retrieved 2009-03-09.
  29. Ayoob, Massad (28 February 2011). Gun Digest Book of Beretta Pistols. Iola, Wisconsin: Gun Digest Books. p. 223. ISBN 1-4402-2424-2.
  30. Tilstra, Russell C. (21 March 2014). The Battle Rifle: Development and Use Since World War II. McFarland. p. 165. ISBN 978-1-4766-1564-6.
  31. Rome, Robert (June 1984). "WWII Silent Killer Still Lives" (PDF). Gung Ho: 29.
  32. "Firearms and Hearing Protection | March 2007 | The Hearing Industry Resource". Hearingreview.com. 2007-02-12. Retrieved 2009-03-09.
  33. "2.7: Decibels". Campus.murraystate.edu. Retrieved 2009-03-09.
  34. "nihl". Hearinglossweb.com. Retrieved 2009-03-09.
  35. dB in Principle and Practice, AWC Systems Technology April 2010
  36. "Bekendtgørelse om våben og ammunition der må anvendes til jagt m.v." [Hunting weapons and ammunition act]. retsinformation.dk (in Danish). Miljøministeriet. 2014-05-07. Retrieved 2015-03-15.
  37. 1 2 3 Baum, Dan (2013). Gun Guys: A Road Trip. Knopf. p. 45. ISBN 978-0-307-59541-6.
  38. Carter, Gregg Lee (1 January 2002). Guns in American Society: An Encyclopedia of History, Politics, Culture, and the Law. ABC-CLIO. p. 512. ISBN 978-1-57607-268-4.
  39. "Criminal Code of Canada, Part III Firearms and other Weapons". Retrieved 2012-11-20.
  40. "Importing a Firearm or Weapon Into Canada". Canadian Border Services Agency. Retrieved 2008-06-11.
  41. "NFA Gun Trust Lawyer Blog". Retrieved 2009-12-29.
  42. "Secure Gun Trust". https://secureguntrust.com. Retrieved 20 February 2015. External link in |website= (help)
  43. "13 V.S.A. § 4010. Gun silencers". Retrieved March 5, 2014.
  44. "Title 26, United States Code, Chapter 53 - Legal Information Institute, Cornell University Law School". Law.cornell.edu. 2008-09-24. Retrieved 2009-03-09.
  45. "Title 18, United States Code, Section 924(c)(1)(B)(ii) - Legal Information Institute, Cornell University Law School". Law.cornell.edu. 2013-02-13. Retrieved 2013-03-17.
  46. "'Hearing Protection Act' would remove tax on gun silencers". AL.com.

External links

Wikimedia Commons has media related to Firearm silencers.
This article is issued from Wikipedia - version of the Tuesday, February 16, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.