Solar still
A solar still distills water, using the heat of the Sun to evaporate, cool then collect the water. There are many types of solar still, including large scale concentrated solar stills, box and pit stills, and stills made from water bottles or plastic bags. In a solar still, impure water is contained outside the collector, where it is evaporated by sunlight shining through clear plastic or glass. The pure water vapor condenses on the cool inside surface and drips down, where it is collected and removed.
Distillation replicates the way nature makes rain. The sun's energy heats water to the point of evaporation. As the water evaporates, water vapor rises, condensing into water again as it cools and can then be collected. This process leaves behind impurities, such as salts and heavy metals, and eliminates microbiological organisms. The end result is pure distilled water.
Overview
Solar stills are used in cases where rain, piped, or well water is impractical, such as in remote homes or during power outages.[1] In subtropical hurricane target areas that can lose power for days, solar distillation can provide an alternative source of clean water.
Materials
A simple basin-type solar still can be constructed with 2-4 stones, plastic film or transparent glass, a central weight to make a point and a container for the condensate. A cubic hole in moist ground is created of about 30 cm (12 inches) on each side. Into the centre of this hole, a collection container is placed. Then a sheet of plastic film is stretched over the hole.
Variation
Transpiration bag
An alternative method of the solar still is called the transpiration bag.[2] The bag is a simple plastic bag and it folds over a stemmed plant with a corner pointing down to allow the condensate to pool. From there a person can remove the water by taking the bag off and pouring the water out or one can make a tiny incision into the corner to drip water into a cup. Its advantage over the basin type solar still mentioned before is that it only requires a bag like one can get at the grocery store. It doesn’t need to be completely transparent. A disadvantage of the transpiration bag is the requirement for a plant in direct sunlight or heat to take the condensate.
In a study performed in 2009, variations to the angle of plastic and increasing the internal temperature of the hole versus the outside temperature made for better water production. Other methods used included using a brine to absorb water from and adding dyes to the brine to change the amount of solar radiation absorbed into the system. During the adjusted tilt angle experiment, the different angles used by the different researchers created different results and it was difficult for any of them to get a definite answer. In the graph, a bell curve is observed with the maximum water output being at 30 degrees angle adjustment. Each brine depth created a different amount of water and it is noted on the graph that about an inch is optimal with a decreasing trend if more is used.[3]
Wick still
The “wick” type solar still is a glass-topped box constructed and held at angle to allow sunlight in.[4] Salt water poured in from the top is heated by sunlight, evaporating the water. It condenses on the underside of the glass and drips to the bottom. A pool of brine in the still attached to the wicks which separates the water into banks to increase surface area for heating. The distilled water comes out of the bottom and depending on the quality of construction most of the salt has been purged from the water. The more wicks, the more heat can be transferred to the salt water and more product can be made. A plastic net can also catch salt water before it falls into the container and give it more time to heat up and separate into brine and water. The wick type solar still is made vapor tight, as in the vapor does not escape to the atmosphere. To aid in absorbing more heat, some wicks are blackened to take in more heat. Glass’s absorption of heat is negligible compared to plastic at higher temperatures. A problem, depending on application, with glass is that it is not flexible if the solar still is not a standard shape.
Practical considerations
The system is inefficient for how much work is put into it versus the water output.[5] In desert environments water needs can exceed 1 US gallon (3.8 L) per day for a person at rest, while still production may average 8 US fluid ounces (240 mL) per day.[5][6] Even with tools, digging a hole requires energy and makes a person lose water through perspiration; this means that even several days of water collection may not be equal to the water lost in its construction.[6] Because of this, it is advised to make a solar still to supplement another water source, such as a reverse-osmosis unit or water purification tablets.
Seawater still
In 1952 the United States military developed a portable solar still for pilots stranded on the ocean, which comprises an inflatable 24-inch plastic ball that floats on the ocean, with a flexible tube coming out the side. A separate plastic bag hangs from attachment points on the outer bag. Seawater is poured into the inner bag from an opening in the ball's neck. Fresh water is taken out by the pilot using the side tube that leads to bottom of the inflatable ball. It was stated in magazine articles that on a good day 2.5 US quarts (2.4 l) of fresh water could be produced. On an overcast day, 1.5 US quarts (1.4 l) was produced.[7] Similar sea water stills are included in some life raft survival kits, though manual reverse osmosis desalinators have mostly replaced them.[8]
In fiction
There are many films and books talking about this technique.
In the TV PBS show The Voyage of the Mimi episode 10 'making dew' 'Water, Water, Everywhere' the build and explain the concept of the solar still.
In Yann Martel's novel Life of Pi, the main character, Piscine Molitor Patel (Pi), survives on a life boat in the Pacific with a Bengal tiger by using twelve solar stills to extract fresh water from saline ocean water.[9]
In the 2002 horror film 28 Days Later about a "zombie apocalypse" in Britain, Frank attempts to use this technique after seeing it on television, but is unable to do so properly.
In the 2013 movie All Is Lost, the character played by Robert Redford discovers that his water jug was accidentally contaminated by seawater. Later, after observing condensation in some of the plastic bags he has on his life raft, he constructs a crude solar still using the water container, with one side cut out, a plastic bag that fits over the whole water container, a small collecting can in the middle, and a compass in the middle, so that the condensed water drains into the can.
See also
References
- ↑ Anjaneyulu, L.; Kumar, E. Arun; Sankannavar, Ravi; Rao, K. Kesava (13 June 2012). "Defluoridation of drinking water and rainwater harvesting using a solar still". Industrial & Engineering Chemistry Research 51 (23): 8040–8048. doi:10.1021/ie201692q.
- ↑ Munilla, R. Solar Still Practical Survivor Retrieved April 22, 2013
- ↑ Abdul Jabbar N. Khalifa; Ahmad M. Hamood (30 November 2009). "Performance correlations for basin type solar stills". Desalination 249 (1): 24–28. doi:10.1016/j.desal.2009.06.011. ISSN 0011-9164.
- ↑ V. Manikandan; K. Shanmugasundaram; S. Shanmugan; B. Janarthanan; J. Chandrasekaran (April 2013). "Wick type solar stills: a review". Renewable and Sustainable Energy Reviews 20: 322–335. doi:10.1016/j.rser.2012.11.046. ISSN 1364-0321.
- 1 2 Alloway, David (2000). Desert survival skills. University of Texas Press. pp. 63–65. ISBN 978-0-292-79226-5. Retrieved 9 May 2013.
- 1 2 United States Air Force (1 April 2008). U.S. Air Force Survival Handbook. Skyhorse Publishing. p. 285. ISBN 978-1-60239-245-8. Retrieved 9 May 2013.
- ↑ "Sea Water Still". Popular Mechanics, February 1952, p. 113.
- ↑ "Manual Reverse Osmosis Desalinator - Notice of Intent to Award Sole Source, USAF". fbo.gov. 2012. Retrieved July 3, 2012.
- ↑ Martel, Yann. Life of Pi.
- Jackson RD; Van Bavel CH (Sep 17, 1965). "Solar distillation of water from soil and plant materials: a simple desert survival technique". Science 149 (3690): 1377–9. doi:10.1126/science.149.3690.1377. PMID 5826532.
- Badran AA; Al-Hallaq AA; Salman IAE; Odat MZ (February 2005). "A solar still augmented with a flat-plate collector" (PDF). Desalination 172 (3): 227–34. doi:10.1016/j.desal.2004.06.203.
Patents
- US 3337418, "Pneumatic solar still"
- US 4235679, "High performance solar still"
- US 4966655, "Plastic covered solar still"
External links
- Making a solar still
- Solar distillation
- Solar distillation with solar ovens
- Plans for solar distillation