Soil test

For other uses, see Geotechnical investigation.

In agriculture, a soil test is the analysis of a soil sample to determine nutrient and contaminated content, composition, and other characteristics such as the acidity or pH level. A soil test can determine fertility, or the expected growth potential of the soil which indicates nutrient deficiencies, potential toxicities from excessive fertility and inhibitions from the presence of non-essential trace minerals. The test is used to mimic the function of roots to assimilate minerals. The expected rate of growth is modeled by the Law of the Maximum.[1]

Labs, such as those at Iowa State and Colorado State University, recommend that a soil test contains 10-20 sample points for every 40 acres (160,000 m2) of field. Tap water or chemicals can change the composition of the soil, and may need to be tested separately. As soil nutrients vary with depth and soil components change with time, the depth and timing of a sample may also affect results.

Composite sampling can be performed by combining soil from several locations prior to analysis. This is a common procedure, but should be used judiciously to avoid skewing results. This procedure must be done so that government sampling requirements are met. A reference map should be created to record the location and quantity of field samples in order to properly interpret test results.

Storage, handling, and moving

Soil chemistry changes over time, as biological and chemical processes break down or combine compounds over time. These processes change once the soil is removed from its natural ecosystem (flora and fauna that penetrate the sampled area) and environment (temperature, moisture, and solar light/radiation cycles). As a result, the chemical composition analysis accuracy can be improved if the soil is analysed soon after its extraction — usually within a relative time period of 24 hours. The chemical changes in the soil can be slowed during storage and transportation by freezing it. Air drying can also preserve the soil sample for many months.

Soil testing

Soil testing is often performed by commercial labs that offer a variety of tests, targeting groups of compounds and minerals. The advantages associated with local lab is that they are familiar with the chemistry of the soil in the area where the sample was taken. This enables technicians to recommend the tests that are most likely to reveal useful information.

Soil testing in progress

Laboratory tests often check for plant nutrients in three categories:

Do-it-yourself kits usually only test for the three "major nutrients", and for soil acidity or pH level. Do-it-yourself kits are often sold at farming cooperatives, university labs, private labs, and some hardware and gardening stores. Electrical meters that measure pH, water content, and sometimes nutrient content of the soil are also available at many hardware stores. Laboratory tests are more accurate than tests with do-it-yourself kits and electrical meters. Here is an example soil sample report from one laboratory.

Soil testing is used to facilitate fertilizer composition and dosage selection for land employed in both agricultural and horticultural industries.

Prepaid mail-in kits for soil and ground water testing are available to facilitate the packaging and delivery of samples to a laboratory. Similarly, in 2004, laboratories began providing fertilizer recommendations along with the soil composition report.

Lab tests are more accurate, though both types are useful. In addition, lab tests frequently include professional interpretation of results and recommendations. Always refer to all proviso statements included in a lab report as they may outline any anomalies, exceptions, and shortcomings in the sampling and/or analytical process/results.

Some laboratories analyze for all 13 mineral nutrients and a dozen non-essential, potentially toxic minerals utilizing the "universal soil extractant" (ammonium bicarbonate DTPA).[2]

Record test

A record test is a test of soil taken for disturbed and undisturbed samples. Record tests are taken only in a soil testing laboratory.

Soil
Murum

Shear test are taken on two machines:

Soil contaminants

Common mineral soil contaminants include arsenic, barium, cadmium, copper, mercury, lead, and zinc.

Lead is a particularly dangerous soil component. The following table from the University of Minnesota categorizes typical soil concentration levels and their associated health risks.[3]

Children and pregnant women should avoid contact with soil estimated total lead levels above 300 ppm
Lead Level Extracted lead (ppm) Estimated total lead (ppm)
Low <43 <500
Medium 43-126 500-1000
High 126-480 1000-3000
Very high >480 >3000
Six gardening practices to reduce the lead risk
  1. Locate gardens away from old painted structures and heavily traveled roads
  2. Give planting preferences to fruiting crops (tomatoes, squash, peas, sunflowers, corn, etc.)
  3. Incorporate organic materials such as finished compost, humus, and peat moss
  4. Lime soil as recommended by soil test (pH 6.5 minimizes lead availability)
  5. Discard old and outer leaves before eating leafy vegetables; peel root crops; wash all produce
  6. Keep dust to a minimum by maintaining a mulched and/or moist soil surface

See also

References

  1. ↑ Soil Science - Malcolm E. Sumner - Google Books. Books.google.com. Retrieved 2012-11-08.
  2. ↑ "wlabs.com". wlabs.com. Retrieved 2012-11-08.
  3. ↑ Carl J. Rosen. "Lead in the Home Garden and Urban Soil Environment". Extension.umn.edu. Retrieved 2012-11-08.


External links

This article is issued from Wikipedia - version of the Thursday, December 03, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.