Smith & Wesson Model 19

The S&W Model 19 is a revolver produced by Smith & Wesson on its K-frame platform. The model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the S&W Model 27.

History

The .357 Magnum is the oldest "magnum" handgun cartridge. Smith & Wesson played a major part in the development and success of the cartridge and revolver that went with it. Firearms writer and experimenter Philip Sharpe is credited for its development during the 1930s when police agencies were asking for a more powerful round. S&W's Dan Wesson agreed to produce a new revolver that would handle "high-intensity" .38 Special loads, but only if Winchester would develop a new cartridge. Elmer Keith, a well known author and wildcatter at the time, was experimenting with hand loading .38 Special ammunition beyond their original specifications, taking advantage of the newer and better designed firearm frames and metallurgy, and also played a major role in the development of the .357 Magnum. Winchester introduced the .357 Magnum, which was dimensionally identical to the .38 Special except for a .125 inch longer case, and the first revolvers (referred to as ".357 Magnum Models") were completed by S&W on April 8, 1935.^[1]

Retired Assistant Chief Patrol Inspector of the U.S. Border Patrol, famous gunfighter, and noted firearms and shooting skills writer Bill Jordan consulted with Smith & Wesson on the design and characteristics of the Model 19. Jordan's idea for a "peace officer's dream"^[2] sidearm was a heavy-barreled four-inch K-Frame .357 Magnum with a shrouded barrel like the big N-frame .357 and adjustable sights. After a year of experimentation with improved-strength steels and special heat-treating processes, the result was the .357 Combat Magnum (later designated Model 19), with the first serial-number gun (K260,000) presented to Jordan on November 15, 1955.^[1][3]

The .357 Magnum, four-inch barreled model was standard issue to uniformed officers of the former U.S. Immigration and Naturalization Service^[4] as well as Patrol Agents of the U.S. Border Patrol until both agencies adopted .40 caliber semi-automatic pistols.^[5]

The .357 Magnum, 2.5” barreled model was standard issue to Special Agents of the former U.S. Immigration and Naturalization Service^[6] as well as Patrol Agents of the U.S. Border Patrol working plain clothes assignments until both agencies adopted .40 caliber semi-automatic pistols.^[7]

Styles

The Model 19 was produced in blued carbon steel or nickel-plated steel with wood or rubber combat grips, an adjustable rear sight, full-target or semi-target hammer, serrated wide target trigger or combat-type trigger, and was available in 2.5" (3": Model 66—rare), 4", or 6-inch barrel lengths. The weights are 30.5 ounces, 36 ounces, and 39 ounces, respectively. The 2.5- and 3-inch barrel versions had round butts, while the others had square butts.^[1]

The Model 19 was produced from 1957 (first model number stampings) to November 1999. The Model 66 was produced from 1970 until 2005. The Model 66 differed by its use of stainless steel and its smooth target-type trigger. The Model 19 and the Model 66 had the same trigger options.^[1]

Engineering changes were designated with a "dash-" number after the model number. The engineering changes are as follows:^[1]

Model 19

• 19 (1957): Stamping of model number.
• 19-1 (1959): Change extractor rod, right to left-hand thread.
• 19-2 (1961): Cylinder stop changed, deleted triggerguard screw.
  • (1963): Introduce 6" barrel.
  • (1963): 50 manufactured with 2.5" barrel, serial range K544672–K544721.
  • (1966): Introduce 2.5" barrel as standard.
• 19-3 (1967): Relocation of rear sight leaf screw.
  • (1968): Delete diamond-insert grip.
• 19-4 (1977): Change gas ring from yoke to cylinder. (Not really an "improvement". It did make it slightly easier to clean if there was heavy leading, but basically was a cost-cutting measure.)
• 19-5 (1982): Eliminate cylinder counterbore and pinned barrel; small change in cylinder length to 1.62".
• 19-6 (1988): New yoke retention system; radius stud package; floating hand; hammer nose bushing.
  • (1992): Blue finish only is catalogued.
• 19-7 (1994): Change to Uncle Mike's Combat synthetic grips; drill and tap frame; change extractor; change rear sight leaf.
  • (1995–96): Delete square butt features.
  • (1996): Discontinue 6" barrel production; begin shipments in blue foam-filled plastic cases.
  • (1997): Change to MIM thumbpiece; ship with Master trigger locks; change to MIM trigger.
• 19-8 (1998): Change in frame design: cylinder stop stud eliminated; eliminate serrated tangs; change to MIM hammer with floating firing pin; change internal lockwork, September 1998.
  • (1999): Discontinue 2 1/2" barrel.

Model 66

• 66 (1970): Stamping of each model.
• 66-1 (1977): Changed the gas ring from the yoke to the cylinder.
• 66-2 (1982): Eliminated pinned and recessed, slightly lengthened cylinder.
• 66-3 (1986): New yoke retention system/radius stud package/hammer nose bushing/floating hand.
• 66-4 (1994): Change rear sight leaf, drill and tap frame, introduce Hogue grips, change extractor.
• 66-5 (1998): Change in frame design: eliminate cylinder stop stud/eliminate serrated tangs/change to MIM hammer with floating firing pin/change internal lockwork.
• 66-6 (2002): Introduced internal lock.
• 66-7 (?): Two piece barrel and internal lock,
• (2005): Discontinued.
• 66-8 (2014): Reintroduced with only 4.25" barrel.

Users

U.S. Air Force

• U.S. Border Patrol^[8]
• Immigration and Naturalization Service (former United States agency, now part of several agencies in the U.S. Department of Homeland Security)^[9]
• South Australian Police
• Rhode Island State Police
• Bundesnachrichtendienst
• GSG 9
• Diplomatic Security Service
• Special Security Team
• Norwegian Police Service
• North Carolina Highway Patrol
• Naval Criminal Investigative Service
• United States Secret Service
• F.B.I.
• Seal Team Six^[10]

References

1. 1 2 3 4 5 Supica, Jim; Nahas, Richard (3 January 2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 136, 186–188. ISBN 0-89689-293-X. 
2. ↑ Taffin, John (2006). "The combat magnum: good gun gone". Guns Magazine. Retrieved 2009-08-02. 
3. ↑ Sweeney, Patrick (2004). The Gun Digest Book of Smith & Wesson. Iola, Wisconsin: Gun Digest Books. pp. 40–41. ISBN 0-87349-792-9. 
4. ↑ Former I&NS Special Agent
5. ↑ Former Border Patrol Agent
6. ↑ Former I&NS Special Agent
7. ↑ Former Border Patrol Agent
8. ↑ Former Border Patrol Agent
9. ↑ Former I&NS Special Agent
10. ↑ Rogue Warrior Richard Marcinko

External links

• S&W M19 under S&W M&P revolver.

Smith & Wesson Revolvers Top Hinge Model 1 Model 1 1/2 Top Break Model 2 Model 3 Safety Hammerless I-frame Model 30 Kit Gun J-frame Model 36 Bodyguard Model 60 Model 340PD Centennial Model 640 K-frame Model 10 Model 12 Model 13 Model 14 Model 15 Model 17 Model 19 Model 617 Model 64 Model 65 Model 66 Model 67 L-frame Model 581 Model 586 Model 619 Model 620 Model 646 Model 681 Model 686 M-frame Ladysmith N-frame Triple Lock .38/44 Model 22 Model 27 Model 28 Model 29 Model 57 Model 610 Model 625 X-frame Model 460 Model 500 Z-frame Governor C-frame (experimental) Model 73 Semi-automatic pistols Model 1006 Model 1913 Model 22A Model 39 Model 4006 Model 41 Model 410 Model 422 Model 4506 Model 457 Model 469 Model 52 Model 5906 Model 6904 Model 59 Model 61 Model 645 Model 910 Bodyguard 380 M&P M&P22 SD VE SW1911 SW99 Sigma Long guns Model 1940 M&P10 M&P15 M&P15-22 Model 320 Model 76 Assault Shotgun Cartridges .22 Short .32 S&W .32 S&W Long .35 S&W Auto .356 TSW .357 Magnum .38 S&W .38 Special .40 S&W .41 Magnum .44 Russian .44 Special .44 S&W American .44 Magnum .45 Schofield .460 S&W Magnum .500 S&W Special .500 S&W Magnum Horace Smith Daniel B. Wesson