Slime mold

Not to be confused with slime bacteria or molds.
Iridescent slime mold, Diachea leucopodia. Berkeley, California, USA
Slime mold Stemonitis fusca in Scotland
Fuligo septica, the "dog vomit" slime mold
Mycetozoa from Ernst Haeckel's 1904 Kunstformen der Natur (Artforms of Nature)

Slime mold or slime mould is an informal name given to several kinds of unrelated eukaryotic organisms that can live freely as single cells, but aggregate together to form multicellular reproductive structures. Slime molds were formerly classified as fungi but are no longer considered part of that kingdom.[1] Although not related to one another, they are still sometimes grouped for convenience within the paraphyletic group referred to as kingdom Protista.

More than 900 species of slime mold occur all over the world. Their common name refers to part of some of these organisms' life cycles where they can appear as gelatinous "slime". This is mostly seen with the myxogastria, which are the only macroscopic slime molds. Most slime molds are smaller than a few centimeters, but some species may reach sizes of up to several square meters and masses of up to 30 grams.[2]

Many slime molds, namely the "cellular" slime molds, actually do not spend most of their time in this state. As long as food is abundant, these slime molds exist as single-celled organisms. When food is in short supply, many of these single-celled organisms will congregate and start moving as a single body. In this state they are sensitive to airborne chemicals and can detect food sources. They can readily change the shape and function of parts and may form stalks that produce fruiting bodies, releasing countless spores, light enough to be carried on the wind or hitch a ride on passing animals.[3]

They feed on microorganisms that live in any type of dead plant material. They contribute to the decomposition of dead vegetation, and feed on bacteria, yeasts, and fungi. For this reason, slime molds are usually found in soil, lawns, and on the forest floor, commonly on deciduous logs. However, in tropical areas they are also common on inflorescences, fruits and in aerial situations (e.g., in the canopy of trees). In urban areas, they are found on mulch or even in the leaf mold in gutters, and also grow in air conditioners, especially when the drain is blocked. One of the most commonly encountered slime molds is the yellow Physarum polycephalum, found both in nature in forests in temperate zones, as well as in classrooms and laboratories.

Taxonomy

Older classification

Slime molds, as a group, are polyphyletic. They were originally represented by the subkingdom Gymnomycota in the Fungi kingdom and included the defunct phyla Myxomycota, Acrasiomycota and Labyrinthulomycota. Today, slime molds have been divided among several supergroups, none of which is included in the kingdom Fungi.

Slime molds can generally be divided into two main groups.

Modern classification

In more strict terms, slime molds comprise the mycetozoan group of the amoebozoa. Mycetozoa include the following three groups:

Even at this level of classification there are conflicts to be resolved. Recent molecular evidence shows that, while the first two groups are likely to be monophyletic, the protosteloids are likely to be polyphyletic. For this reason, scientists are currently trying to understand the relationships among these three groups.

Slime mold Trichia varia

The most commonly encountered are the Myxogastria. A common slime mold that forms tiny brown tufts on rotting logs is Stemonitis. Another form, which lives in rotting logs and is often used in research, is Physarum polycephalum. In logs, it has the appearance of a slimy web-work of yellow threads, up to a few feet in size. Fuligo forms yellow crusts in mulch.

The Dictyosteliida, cellular slime molds, are distantly related to the plasmodial slime molds and have a very different lifestyle. Their amoebae do not form huge coenocytes, and remain individual. They live in similar habitats and feed on microorganisms. When food runs out and they are ready to form sporangia, they do something radically different. They release signal molecules into their environment, by which they find each other and create swarms. These amoeba then join up into a tiny multicellular slug-like coordinated creature, which crawls to an open lit place and grows into a fruiting body. Some of the amoebae become spores to begin the next generation, but some of the amoebae sacrifice themselves to become a dead stalk, lifting the spores up into the air.

The protosteloids have characters intermediate between the previous two groups, but they are much smaller, the fruiting bodies only forming one to a few spores.

Non-amoebozoan slime moulds include:

Grouping Genera Morphology
Amoebozoa > Conosa > Mycetozoa

Class Myxogastria: Cribraria, Lycogala, Tubifera, Echinostelium, Fuligo, Lepidoderma, Physarum, Comatricha, Stemonitis, Arcyria, Trichia

 Syncytial or plasmodial slime molds

Class Dictyostelia: Dictyostelium, Polysphondylium, Acytostelium

 Cellular slime molds

Class Protostelia: Planoprotostelium, Protostelium

 Intermediate between myxomycetes and dictyostelids, but they are much smaller, the fruiting bodies only forming one to a few spores.
Rhizaria > Cercozoa > Endomyxa Class Phytomyxea: Lignieria, Membranosorus, Octomyxa, Phagomyxa, Plasmodiophora, Polymyxa, Sorodiscus, Sorosphaera, Spongospora, Tetramyxa, Woronina Parasitic protists that can cause cabbage club root disease and powdery scab tuber disease. They form coenocytes, but are internal parasites of plants.
Excavata > Percolozoa > Heterolobosea Order Acrasida: Acrasis Cellular slime molds that have a similar life style to dictyostelids, but their amoebae behave differently, having eruptive pseudopodia.
Chromalveolate > Heterokontophyta > Labyrinthulomycetes Order Labyrinthulida: Labyrinthulids, Labyrinthula, Thraustochytrids, Aplanochytrium, Labyrinthuloides, Japonochytrium, Schizochytrium, Thraustochytrium, Ulkenia, Diplophryids, Diplophrys Slime nets that are marine and form labyrinthine networks of tubes in which amoeba without pseudopods can travel.
Opisthokonta > Holomycota > Fonticulida Fonticula Cellular slime mold that forms a fruiting body in a volcano shape.

Life cycle

Slime mold growing out of a bin of wet paper

Slime molds begin life as amoeba-like cells. These unicellular amoebae are commonly haploid and multiply if they encounter their favorite food, bacteria. These amoebae can mate if they encounter the correct mating type and form zygotes that then grow into plasmodia. These contain many nuclei without cell membranes between them, which can grow to be meters in size. The species Fuligo septica is often seen as a slimy yellow network in and on rotting logs. The amoebae and the plasmodia engulf microorganisms.[7] The plasmodium grows into an interconnected network of protoplasmic strands.

Within each protoplasmic strand the cytoplasmic contents rapidly stream. If one strand is carefully watched for about 50 seconds, the cytoplasm can be seen to slow, stop, and then reverse direction. The streaming protoplasm within a plasmodial strand can reach speeds of up to 1.35 mm per second which is the fastest rate recorded for any micro-organism.[8] Migration of the plasmodium is accomplished when more protoplasm streams to advancing areas and protoplasm is withdrawn from rear areas. When the food supply wanes, the plasmodium will migrate to the surface of its substrate and transform into rigid fruiting bodies. The fruiting bodies or sporangia are what we commonly see; they superficially look like fungi or molds but are not related to the true fungi. These sporangia will then release spores which hatch into amoebae to begin the life cycle again.

Plasmodia

The mid sporangial phase of Enteridium lycoperdon on a mossy tree trunk.

In Myxogastria, the plasmoidal portion of the life cycle only occurs after syngamy, which is the fusion of cytoplasm and nuclei of myxoamoebae or swarm cells. The diploid zygote becomes a multinucleated plasmodium through multiple nuclear divisions without further cell division. Myxomycete plasmodia are multinucleate masses of protoplasm that move by cytoplasmic streaming. In order for the plasmodium to move, cytoplasm must be diverted towards the leading edge from the lagging end. This process results in the plasmodium advancing in fan-like fronts. As it moves, plasmodium also gains nutrients through the phagocytosis of bacteria and small pieces of organic matter.

The plasmodium also has the ability to subdivide and establish separate plasmodia. Conversely, separate plasmodia that are genetically similar and compatible can fuse together to create a larger plasmodium. In the event that conditions become dry, the plasmodium will form a sclerotium, essentially a dry and dormant state. In the event that conditions become moist again the sclerotium absorbs water and an active plasmodium is restored. When the food supply wanes, the Myxomycete plasmodium will enter the next stage of its life cycle forming haploid spores, often in a well-defined sporangium or other spore-bearing structure.

Behavior

When a slime mold mass or mound is physically separated, the cells find their way back to re-unite. Studies on Physarum have even shown an ability to learn and predict periodic unfavorable conditions in laboratory experiments.[9][10] Professor John Tyler Bonner, who has spent a lifetime studying slime molds argues that they are "no more than a bag of amoebae encased in a thin slime sheath, yet they manage to have various behaviours that are equal to those of animals who possess muscles and nerves with ganglia – that is, simple brains."

Atsushi Tero of Hokkaido University grew the slime mold Physarum polycephalum in a flat wet dish. He placed the mold in a central position representing Tokyo, and he placed oat flakes in the dish corresponding to the locations of other major cities in the Greater Tokyo Area. As Physarum avoids bright light, light was used to simulate mountains, water and other obstacles in the dish. The mold first densely filled the space with plasmodia, then thinned the network to focus on efficiently connected branches. The network strikingly resembled Tokyo's rail system.[11][12]

See also

References

  1. ↑ "Introduction to the "Slime Molds"". University of California Museum of Paleontology. Retrieved 2009-04-04.
  2. ↑ "Zinc accumulation by the slime mold Fuligo septica (L.) Wiggers in the former Soviet Union and North Korea". Journal of Environment Quality 31 (3): 1038–42. 2002. doi:10.2134/jeq2002.1038. PMID 12026071.
  3. ↑ Rebecca Jacobson (April 5, 2012). "Slime Molds: No Brains, No Feet, No Problem". PBS Newshour.
  4. ↑ Mary C. Deasey and Lindsay S. Olive (31 July 1981), "Role of Golgi Apparatus in Sorogenesis by the Cellular Slime Mold Fonticula alba", Science 213 (4507): 561–563, doi:10.1126/science.213.4507.561
  5. ↑ Ann C. Worley, Kenneth B. Raper and Marianne Hohl (Jul–Aug 1979), "Fonticula alba: A New Cellular Slime Mold (Acrasiomycetes)", Mycologia 71 (4): 746–760, doi:10.2307/3759186, JSTOR 3759186
  6. ↑ Matthew W. Brown, Frederick W. Spiegel and Jeffrey D. Silberman (2009), "Phylogeny of the "Forgotten" Cellular Slime Mold, Fonticula alba, Reveals a Key Evolutionary Branch within Opisthokonta", Molecular Biology and Evolution 26 (12): 2699–2709, doi:10.1093/molbev/msp185, PMID 19692665
  7. ↑ Ling, H. 1999. "Myxomycetes, Overlooked Native Plants" The Native Plant Society of New Jersey Newsletter, Fall p5.
  8. ↑ Alexopolous, C.J. 1962, second edition. "Introductory Mycology" John Wiley and Sons, p. 78.
  9. ↑ Saigusa, T et al. Amoebae Anticipate Periodic Events. Hokkaido University PRL 100,018101 (2008)
  10. ↑ Jennifer Barone (2009). "#71: Slime Molds Show Surprising Degree of Intelligence: A creature with no brain can learn from and even anticipate events".
  11. ↑ Ed Yong (2010). "Slime mould attacks simulates Tokyo rail network".
  12. ↑ "Rules for Biologically Inspired Adaptive Network Design". Science 327: 439–42. January 2010. doi:10.1126/science.1177894. PMID 20093467.

External links

Wikisource has the text of The New Student's Reference Work article Myxomycetes.
This article is issued from Wikipedia - version of the Monday, February 08, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.