Silver cyanide
| Names | |
|---|---|
| IUPAC name
Silver cyanide | |
| Other names
Argentous cyanide | |
| Identifiers | |
506-64-9  | |
| ChemSpider | 10043  |
| Jmol interactive 3D | Image |
| RTECS number | VW3850000 |
| |
| |
| Properties | |
| AgCN | |
| Molar mass | 133.8856 g/mol |
| Appearance | colorless, gray (impure) crystals |
| Odor | odorless |
| Density | 3.943 g/cm3 |
| Melting point | 335 °C (635 °F; 608 K) (decomposes) |
| 0.000023 g/100 mL (20 °C) | |
| Solubility | soluble in concentrated ammonia, boiling nitric acid, ammonium hydroxide, KCN insoluble in alcohol, dilute acid |
| Refractive index (nD) |
1/685 |
| Structure | |
| hexagonal | |
| linear | |
| Thermochemistry | |
| Std molar entropy (S |
84 J·mol−1·K−1[1] |
| Std enthalpy of formation (ΔfH |
146 kJ·mol−1[1] |
| Hazards | |
| Main hazards | toxic |
| R-phrases | 25-32-33-41-50/53 |
| S-phrases | 7-26-45-60-61 |
| NFPA 704 | |
| Flash point | 320 °C (608 °F; 593 K) |
| Lethal dose or concentration (LD, LC): | |
| LD50 (Median dose) |
123 mg/kg (oral, rat) |
| Related compounds | |
| Other anions |
AgCl |
| Other cations |
NaCN Copper(I) cyanide |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| verify (what is ?) | |
| Infobox references | |
Silver cyanide is the chemical compound with the formula AgCN. This white solid forms upon treatment of solutions containing Ag+ with cyanide. This precipitation step is used in some schemes to recover silver from solution. Silver cyanide is used in silver-plating.
Structure
Its structure consist of -[Ag-CN]- chains in which the linear two-coordinate Ag+ ions, typical of silver(I) and other d10 ions are bridge by the cyanide ions. (This is the same binding mode as seen in the more famous case of Prussian blue.) These chains then pack hexagonally with adjacent chains ofset by +/- 1/3 of the "c" lattice parameter. This is the same as the structure adopted by the high temperature polymorph of copper(I) cyanide. The silver to carbon and silver to nitrogen bond lengths in AgCN are both ~2.09 Å[2] and the cyanide groups show head-to-tail disorder.[3]
Reactions
AgCN precipitates upon the addition of sodium cyanide to a solution containing Ag+. The precipitate dissolves upon the addition of further amounts of cyanide to form linear [Ag(CN)2]−(aq) and [Ag(CN)3]2−(aq) on the addition of further cyanide. Silver cyanide is also soluble in solutions containing other ligands such as ammonia or tertiary phosphines.
Silver cyanides form structurally complex materials upon reaction with other anions.[4] Some silver cyanides are luminescent.[5]
Uses
Both AgCN and KAg(CN)2 have been used in silver-plating solutions since at least 1840 when the Elkington brothers patented their recipe for a silver-plating solution. A typical, traditional silver-plating solution would contain KAg(CN)2 15-40 gL−1, KCN 12-120 gL−1 and K2CO3 gL−1.[6]
See also
References
- 1 2 Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. p. A23. ISBN 0-618-94690-X.
- ↑ Hibble, S. J.; Cheyne, S. M.; Hannon, A. C.; Eversfield, S. G.“Beyond Bragg scattering: the structure of AgCN determined from total neutron diffraction” Inorganic Chemistry 2002, volume 41, pages 1042.
- ↑ Bryce, D. L.; Wasylishen, R.E.“Insight into the Structure of Silver Cyanide from 13C and 15N Solid-State NMR Spectroscopy” Inorganic Chemistry 2002, volume 41, pages 4131.
- ↑ Urban, V.; Pretsch, T.; Hartl, H. “From AgCN Chains to a Fivefold Helix and a Fishnet-Shaped Framework Structure” Angewandte Chemie International Edition 2005, volume 44, pages 2794–2797.
- ↑ Omary, M. A.; Webb, T.R.; Assefa, Z.; Shankle, G. E.; Patterson, H. H. “Crystal Structure, Electronic Structure, and Temperature-Dependent Raman Spectra of Tl[Ag(CN)2]: Evidence for Ligand-Unsupported Argentophilic Interactions” Inorganic Chemistry 1998, volume 37, pages 1380-1386.
- ↑ Blair, A. “Silver Plating” Metal Finishing 2000, volume 98, page 298.
| ||||||||||||||||||||||