SHA-3

SHA-3 (Secure Hash Algorithm 3), a subset of the cryptographic primitive family Keccak (/ˈkætʃæk/, or /kɛtʃɑːk/),^[1][2][3] is a cryptographic hash function designed by Guido Bertoni, Joan Daemen, Michaël Peeters, and Gilles Van Assche, building upon RadioGatún. SHA-3 is a member of the Secure Hash Algorithm family. The SHA-3 standard was released by NIST on August 5, 2015.^[4][5] The reference implementation source code was dedicated to public domain via CC0 waiver.^[6]

History

The Keccak algorithm is the work of Guido Bertoni, Joan Daemen (who also co-designed the Rijndael cipher with Vincent Rijmen), Michael Peeters, and Gilles Van Assche. It is based on earlier hash function designs PANAMA and RadioGatún. PANAMA was designed by Daemen and Craig Clapp in 1998. RadioGatún, a successor of PANAMA, was designed by Daemen, Peeters, and Van Assche, and was presented at the NIST Hash Workshop in 2006.^[7]

In 2006 NIST started to organize the NIST hash function competition to create new hash standard, SHA-3. SHA-3 is not meant to replace SHA-2, as no significant attack on SHA-2 has been demonstrated. Because of the successful attacks on MD5 and SHA-0 and theoretical attacks on SHA-1,^[8] NIST perceived a need for an alternative, dissimilar cryptographic hash, which became SHA-3.

After a setup period, admissions were to be submitted by the end of 2008. Keccak was accepted as one of the 51 candidates. In July 2009, 14 algorithms were selected for the second round. Keccak advanced to the last round in December 2010.^[9]

During the competition, entrants were permitted to "tweak" their algorithms to address issues that were discovered. Changes that have been made to Keccak are:^[10][11]

• The number of rounds was increased from 12 + ℓ to 12 + 2ℓ to be more conservative about security.
• The message padding was changed from a more complex scheme to the simple 10^*1 pattern described below.
• The rate r was increased to the security limit, rather than rounding down to the nearest power of 2.

On October 2, 2012, Keccak was selected as the winner of the competition.^[1]

In 2014, the NIST has published a draft FIPS 202 "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions".^[12] FIPS 202 was approved on August 5, 2015.^[13]

On August 5, 2015 NIST announced that SHA-3 had become a hashing standard.^[14]

Design

The sponge construction for hash functions. p_i are input, z_i are hashed output. The unused "capacity" c should be twice the desired resistance to collision or preimage attacks.

SHA-3 uses the sponge construction,^[15][16] in which data is "absorbed" into the sponge, then the result is "squeezed" out. In the absorbing phase, message blocks are XORed into a subset of the state, which is then transformed as a whole. In the "squeeze" phase, output blocks are read from the same subset of the state, alternated with state transformations.

The size of the part written and read is called "rate", and the part that is untouched by input/output is called "capacity". The capacity determines the security of the scheme. The maximum security level is half the capacity.

In SHA-3, the state consists of a 5 × 5 array of 64-bit words, 1600 bits total. The authors claim 12.5 cycles per byte^[17] on an Intel Core 2 CPU. However, in hardware implementations, it is notably faster than all other finalists.^[18]

Keccak's authors have proposed additional, not-yet-standardized uses for the function, including an authenticated encryption system and a "tree" hash for faster hashing on certain architectures.^[19] Keccak is also defined for smaller power-of-2 word sizes w down to 1 bit (25 bits total state). Small state sizes can be used to test cryptanalytic attacks, and intermediate state sizes (from w = 8, 200 bits, to w = 32, 800 bits) can be used in practical, lightweight applications.^[20][21]

The block permutation

This is defined for any power-of-two word size, w = 2^ℓ bits. The main SHA-3 submission uses 64-bit words, ℓ = 6.

The state can be considered to be a 5 × 5 × w array of bits. Let a[i][ j][k] be bit (5i + j) × w + k of the input, using a little-endian bit numbering convention and row-major indexing. I.e. i selects the column, j the row, and k the bit.

Index arithmetic is performed modulo 5 for the first two dimensions and modulo w for the third.

The basic block permutation function consists of 12 + 2ℓ iterations of five sub-rounds, each individually very simple:

θ

Compute the parity of each of the 5w (320, when w = 64) 5-bit columns, and exclusive-or that into two nearby columns in a regular pattern. To be precise, a[i][ j][k] ← a[i][ j][k] ⊕ parity(a[0...4][ j−1][k]) ⊕ parity(a[0...4][ j+1][k−1])

ρ

Bitwise rotate each of the 25 words by a different triangular number 0, 1, 3, 6, 10, 15, .... To be precise, a[0][0] is not rotated, and for all 0 ≤ t < 24, a[i][ j][k] ← a[i][ j][k−(t+1)(t+2)/2], where .

π

Permute the 25 words in a fixed pattern. a[ j][2i+3 j] ← a[i][ j].

χ

Bitwise combine along rows, using a ← a ⊕ (¬b & c). To be precise, a[i][ j][k] ← a[i][ j][k] ⊕ ¬a[i][ j+1][k] & a[i][ j+2][k]. This is the only non-linear operation in SHA-3.

ι

Exclusive-or a round constant into one word of the state. To be precise, in round n, for 0 ≤ m ≤ ℓ, a[0][0][2^m−1] is exclusive-ORed with bit m + 7n of a degree-8 LFSR sequence. This breaks the symmetry that is preserved by the other sub-rounds.

Hashing variable-length messages

To ensure the message can be evenly divided into r-bit blocks, padding is required. Keccak uses the pattern 10^*1: a 1 bit, zero or more 0 bits (maximum r − 1), and a final 1 bit. The final 1 bit is required for the security proof to work for sponges of different rates, that is, different hash variants (multi-rate padding). Without it, different hash variants of the same short message would be the same up to truncation.

To compute a hash, initialize the state to 0, pad the input, and break it into r-bit pieces. Absorb the input into the state; that is, for each piece, XOR it into the state and then apply the block permutation.

After the final block permutation, the desired number of bits is n squeezed. For the SHA3 instances, r is always greater than n, thus there is never a need for additional block permutations in the squeezing phase. The leading n bits of the state are the desired hash. However, arbitrary output length may be useful in applications such as optimal asymmetric encryption padding.

Instances

The NIST standard defines the following instances.

Keccak[capacity](M, d) is defined as the sponge construction using Keccak-f[1600, capacity], message M and output length d. Note, that the appended postfixes are written as bit strings, not hexadecimal digits.

The SHA3 instances are the drop-in replacements for SHA2, with identical security claims. SHAKE instances are so called XOF's, Extendable Output Functions. For example, SHAKE128(M, 256) can be used as a hash function with 128 bit overall security.

Note that all instances append some bits to the message. Since 10^*1 padding always adds at least two bits, in byte aligned libraries we always have six unused zero bits. Therefore, these appended extra bits never make the padded message longer.

NIST announcement controversy

In February 2013 at the RSA Conference, and then in August 2013 at CHES, NIST announced they would select different values for the capacity, i.e. the security parameter, for the SHA-3 standard, compared to the submission.^[22][23] The changes caused some turmoil.

In September 2013, Daniel J. Bernstein suggested on the NIST hash-forum mailing list^[24] to strengthen the security to the 576-bit capacity that was originally proposed as the default Keccak.^[25] In late September, the Keccak team responded by stating that they proposed 128-bit security by setting c = 256 as an option already in their SHA-3 proposal.^[26] However, in the light of the uproar in the cryptographic community, they proposed raising the capacity to 512 bits for all instances.^[27]

In early October 2013, Bruce Schneier criticized NIST's decision on the basis of its possible detrimental effects on the acceptance of the algorithm, saying

There is too much mistrust in the air. NIST risks publishing an algorithm that no one will trust and no one (except those forced) will use.^[28]

Paul Crowley, a senior developer at an independent software development company, expressed his support of the decision, saying that Keccak is supposed to be tunable and there is no reason for different security levels within one primitive. He also added:

Yes, it’s a bit of a shame for the competition that they demanded a certain security level for entrants, then went to publish a standard with a different one. But there’s nothing that can be done to fix that now, except re-opening the competition. Demanding that they stick to their mistake doesn’t improve things for anyone.^[29]

There was also some confusion that internal changes were made to Keccak. The Keccak team clarified this, stating that NIST's proposal for SHA-3 is a subset of the Keccak family, for which one can generate test vectors using their reference code submitted to the contest, and that this proposal was the result of a series of discussions between them and the NIST hash team.^[30] Also, Bruce Schneier corrected his earlier statement, saying

I misspoke when I wrote that NIST made "internal changes" to the algorithm. That was sloppy of me. The Keccak permutation remains unchanged. What NIST proposed was reducing the hash function's capacity in the name of performance. One of Keccak's nice features is that it's highly tunable.^[28]

In November 2013, in the light of the uproar in the cryptographic community, John Kelsey of NIST proposed to go back to the original c = 2n proposal for all SHA-2 drop-in replacement instances.^[31] These changes were confirmed in the April 2014 draft.^[32] This proposal was implemented in the final release standard in August 2015.^[4]

Examples of SHA-3 variants

SHA3-224("")
6b4e03423667dbb73b6e15454f0eb1abd4597f9a1b078e3f5b5a6bc7
SHA3-256("")
a7ffc6f8bf1ed76651c14756a061d662f580ff4de43b49fa82d80a4b80f8434a
SHA3-384("")
0c63a75b845e4f7d01107d852e4c2485c51a50aaaa94fc61995e71bbee983a2ac3713831264adb47fb6bd1e058d5f004
SHA3-512("")
a69f73cca23a9ac5c8b567dc185a756e97c982164fe25859e0d1dcc1475c80a615b2123af1f5f94c11e3e9402c3ac558f500199d95b6d3e301758586281dcd26
SHAKE128("", 256)
7f9c2ba4e88f827d616045507605853ed73b8093f6efbc88eb1a6eacfa66ef26
SHAKE256("", 512)
46b9dd2b0ba88d13233b3feb743eeb243fcd52ea62b81b82b50c27646ed5762fd75dc4ddd8c0f200cb05019d67b592f6fc821c49479ab48640292eacb3b7c4be

Changing a single bit results in each bit in the output to change with 50% probability, demonstrating an avalanche effect:

SHAKE128("The quick brown fox jumps over the lazy dog", 256)
f4202e3c5852f9182a0430fd8144f0a74b95e7417ecae17db0f8cfeed0e3e66e
SHAKE128("The quick brown fox jumps over the lazy dof", 256)
853f4538be0db9621a6cea659a06c1107b1f83f02b13d18297bd39d7411cf10c

Comparison of SHA functions

In the table below, internal state means the number of bits that are carried over to the next block.

References

External links

• The Keccak web site

Hash functions & message authentication codes Security summary Common functions MD5 SHA-1 SHA-2 SHA-3/Keccak SHA-3 finalists BLAKE Grøstl JH Skein Keccak (winner) Other functions FSB ECOH GOST HAS-160 HAVAL Kupyna LM hash MDC-2 MD2 MD4 MD5 MD6 N-Hash RadioGatún RIPEMD SipHash Snefru Streebog SWIFFT Tiger VSH WHIRLPOOL MAC algorithms DAA CBC-MAC HMAC OMAC/CMAC PMAC VMAC UMAC Poly1305 Authenticated encryption modes CCM CWC EAX GCM IAPM OCB Attacks Collision attack Preimage attack Birthday attack Brute force attack Rainbow table Side-channel attack Length extension attack Design Avalanche effect Hash collision Merkle–Damgård construction Standardization CRYPTREC NESSIE NIST hash function competition Utilization Salt Key stretching Message authentication Key derivation functions bcrypt crypt(3) (DES) PBKDF2 scrypt Argon2 Cryptography History of cryptography Cryptanalysis Outline of cryptography Symmetric-key algorithm Block cipher Stream cipher Public-key cryptography Cryptographic hash function Message authentication code Random numbers Steganography Portal