Seminoe Dam

Seminoe Dam
Spillways full open following heavy snowmelt, June 2011
Location of Seminoe Dam in Wyoming
Country	United States
Location	Carbon County, Wyoming
Coordinates	42°09′21″N 106°54′30″W / 42.15583°N 106.90833°W / 42.15583; -106.90833Coordinates: 42°09′21″N 106°54′30″W / 42.15583°N 106.90833°W / 42.15583; -106.90833
Status	In use
Construction began	1936
Opening date	1939
Owner(s)	U.S. Bureau of Reclamation
Dam and spillways
Type of dam	Concrete thick gravity-arch
Impounds	North Platte River
Height	295 ft (90 m)[1]
Length	530 ft (160 m)[1]
Width (crest)	15 ft (4.6 m)[1]
Width (base)	85 ft (26 m)
Dam volume	210,000 cu yd (160,000 m3)[1]
Spillways	1
Spillway type	Gated concrete tunnel
Spillway capacity	48,500 cu ft/s (1,370 m3/s)[2]
Reservoir
Creates	Seminoe Reservoir
Total capacity	1,017,279 acre·ft (1.254795×109 m3)[2]
Catchment area	7,210 sq mi (18,700 km2)[2]
Surface area	20,291 acres (8,211 ha)
Max. water depth	206 ft (63 m)[1]
Power station
Hydraulic head	166 ft (51 m)[3]
Turbines	3x 15 MW
Installed capacity	45 MW
Annual generation	96,406,970 KWh (2007)

Seminoe Dam is a concrete thick-arch dam on the North Platte River in the U.S. state of Wyoming. The dam stores water for irrigation and hydroelectricity generation, and is owned and operated by the U.S. Bureau of Reclamation. It is the uppermost dam on the North Platte River and is located directly upstream from the Kortes Dam. It lies in a narrow, isolated canyon formed by the North Platte cutting through the Seminoe Mountains about 40 miles (64 km) northeast of Rawlins. The 295-foot (90 m) dam forms Seminoe Reservoir, which covers more than 20,000 acres (8,100 ha) when full.^[4] Seminoe State Park is adjacent to the reservoir.

History

This dam was first proposed in the 1930s as part of the Bureau of Reclamation's Kendrick Project, which would regulate the flow of the North Platte River in order to improve agriculture in the valleys surrounding Casper, Wyoming. Originally known as the Casper-Alcova Project, it was authorized by the National Industrial Recovery Act on June 16, 1933 in response to the Great Depression. The project was renamed the Kendrick Project on August 9, 1937 in honor of Wyoming politician John B. Kendrick.^[5]

Seminoe Dam and Reservoir from the air

In 1934, Winston Brothers Company and Associates won the construction contract of Seminoe Dam. Groundbreaking of the damsite was on February 20, 1936 with preliminary blasting and excavations. The diversion tunnel for the North Platte was completed on January 17, 1937 with one fatality, and by May of that year, a cofferdam was completed to a sufficient height to divert the river into the new channel. Concrete pouring began on January 19, 1938 and the last bucket was emptied on December 21, 1938; water storage began in April 2, 1939 when the outlet tunnels were closed. The dam's power station was finished and the entire project was declared operational on August 3, 1939. A total of two deaths and several serious injuries resulted from the construction, and a pair of active faults that cut across the canyon near the dam site had to be excavated and filled in.^[5]

When the project was first completed, it delivered water to just 600 acres (240 ha), but has progressed steadily, and by 1980 supplied irrigation water to 22,581 acres (9,138 ha) in the Casper valley.^[3]

Recreation

The Seminoe Reservoir is stocked with fish by the Wyoming Game and Fish Commission, and is open to boating and fishing, although access to the shoreline is limited and sometimes difficult due to the lack of development and distance from major cities.

See also

• Alcova Dam
• Pathfinder Dam
• List of largest reservoirs of Wyoming

References