Stationery

Not to be confused with Stationary (disambiguation).
"Stationers" redirects here. For the livery company, see Worshipful Company of Stationers and Newspaper Makers.
Inside of a stationery shop in Hanoi

Stationery is commercially manufactured writing materials, including cut paper, envelopes, writing implements, continuous stationery, and other office supplies.[1] Stationery included materials to be written on by hand (e.g., letter paper) or by equipment such as computer printers.

History of stationery

Originally the term stationery referred to all products sold by a stationer, whose name indicates that his book shop was on a fixed spot, usually near a university, and permanent, while medieval trading was mainly carried on by itinerant peddlers (including chapmen, who sold books) and others (such as farmers and craftsmen) at markets and fairs. It was a special term used between the 13th and 15th centuries in the manuscript culture. The Stationers' Company formerly held a monopoly over the publishing industry in England and was responsible for copyright regulations.

In its modern sense including personal writing materials, stationery has been an important part of good social etiquette, particularly since the Victorian era. Some uses of stationery, such as sending a manufactured reply card to a wedding invitation, have changed from offensive to appropriate.

The use and marketing of stationery is being partly superseded by electronic media. Stationery is intrinsically linked to paper and the process of written, personalized communication, and many techniques of stationery manufacture are employed, of varying desirability and expense. The most familiar of these techniques are letterpress printing, embossing, engraving and thermographic printing (often confused with thermography). Flat printing and offset printing are regularly used, particularly for low-cost or informal needs.

Uses of stationery

Printing

Letterpress

Example of inked letterpress process
Main article: Letterpress printing

Letterpress is a method of printing many identical copies that requires characters being impressed upon the page. The print may be inked or blind but is typically done in a single color. Motifs or designs may be added as many letterpress machines use movable plates that must be hand-set.

Single documents

Main article: Computer printer

When a single document needs to be produced, it may be handwritten or printed typically by a computer printer. Several copies of one original can be produced by some printers using multipart stationery. Typing with a typewriter is obsolescent, having been largely superseded by preparing a document with a word processor and printing.

Thermographic

Example of thermographic printing. The uneven quality of the text is a result of the process and easily differentiates thermographic printing from embossing

Thermographic printing is a process that involves several stages but can be implemented in a low-cost manufacturing process. The process involves printing the desired designs or text with an ink that remains wet, rather than drying on contact with the paper. The paper is then dusted with a powdered polymer that adheres to the ink. The paper is vacuumed or agitated, mechanically or by hand, to remove excess powder, and then heated to near combustion. The wet ink and polymer bond and dry, resulting in a raised print surface similar to the result of an engraving process.

Embossing

Example of an embossed design

Embossing is a printing technique used to create raised surfaces in the converted paper stock. The process relies upon mated dies that press the paper into a shape that can be observed on both the front and back surfaces.

Engraving

Example of a brass engraving plate, showing heavy wear. The plate is hand or machine engraved, inked, and forced into paper at extremely high pressures.
Main article: Engraving

Engraving is a process that requires a design to be cut into a plate made of a relatively hard material. It is a technology with a long history and requires significant skill and experience. The finished plate is usually covered in ink, and then the ink is removed from all of the un-etched portions of the plate. The plate is then pressed into paper under substantial pressure. The result is a design that is slightly raised on the surface of the paper and covered in ink. Due to the cost of the process and expertise required, many consumers opt for thermographic printing, a process that results in a similarly raised print surface, but through different means at less cost.

Classifications

School supplies

Many shops that sell stationery also sell other school supplies for students in primary and secondary education, including pocket calculators, display boards, compasses and protractors, lunchboxes, and the like.[2][3]

Retail dollar sales of back-to-school products from the office super stores grew 2 percent in August 2010 compared to August 2009, after July 2010 showed flat performance. The back-to-school season for school supplies had its best performance in the latter half of August, as many consumers waited until the last minute to purchase their supplies. [4]

See also

References

  1. ↑ Peter Beal, ed., "Stationery", A Dictionary of English Manuscript Terminology, 1450–2000 (Oxford: Oxford University Press, 2008 [2011 online]).
  2. ↑ Streamlined Sales Tax Project "Definitions for School Related Supplies: SSTP Recommendations for Amendment to Agreement; July 29, 2004"
  3. ↑ Virginia Department of Taxation "School Supplies and Clothing FAQs"
  4. ↑ A Late Back-To-School Season Shows Modest Recovery for the Office Supplies Industry, by The NPD Group: https://www.npd.com/wps/portal/npd/us/news/press-releases/pr_100916/

External links

This article is issued from Wikipedia - version of the Wednesday, October 14, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.