Schempp-Hirth Discus

Discus
Role Standard-class sailplane
Manufacturer Schempp-Hirth
Designer Klaus Holighaus
Number built >850


The Schempp-Hirth Discus is a Standard Class glider designed by Schempp-Hirth. It was produced in Germany between 1984 and 1995 but has continued in production in the Czech Republic. It replaced the Standard Cirrus. It was designed by Klaus Holighaus.

Design and development

The Discus was the first production sailplane to have a distinctive swept-back leading edge. This is now common in contemporary sailplanes.

Studies had long shown that the ideal wing for minimizing induced drag should be an elliptic planform. To keep production costs down, a triple-trapezoidal approximation of this shape was adopted for the Discus. The wing section was also new. Winglets were only available towards the end of the production run, though many have been retro-fitted. The fuselage and tail were adapted from the Schempp-Hirth Ventus. A version with a narrow fuselage is called the Discus 'a' and the wider fuselage version is called the 'b'. The fuselage is made of glass-reinforced plastic around a steel tube frame. The wings and tail surfaces are also fiberglass with the exception of the main wing spar, which is made of carbon fiber. There is a 6.5 l (1.7 US gal; 1.4 imp gal) water ballast tank in the fin for trimming purposes when the main wing mounted ballast tanks are in use (184L combined) for a maximum wing-loading of 50 kg/m2 (10 lb/sq ft)

Competition use

The Discus dominated standard class sailplane racing throughout the 1980s, winning the 1985, 1987 and 1989 World Gliding Championships.

Performance

The best measured glide ratio is 42.5:1. Though it is considered a high performance sailplane, its handling is well within the capabilities of inexperienced pilots. With no bad manners, powerful airbrakes and a low landing speed, the Discus is popular with clubs. Discuses are easy gliders to assemble, having light wings, automatic control hookups and a single pin securing the wings.

Production

Over 850 Discuses had been built by 2004 and it remains in production today despite the introduction of its successor, the Schempp-Hirth Discus-2. About 12 per year are built under license by Schempp-Hirth Vyroba in the Czech Republic as the Discus CS. Some models are fitted with small sustaining engines (turbos) and are designated Discus T.

Variants

Discus a
Short fuselage and narrow cockpit optimized for smaller pilots, utilising the fuselage and tail of the Ventus a.
Discus b
Standard production model utilizing the fuselage and tail of the Ventus b.
Discus bT
Discus b with a retractable sustainer motor
Discus bM
Motor-glider with retractable engine
Discus CS
Continued production in the Czech Republic
Discus K
Aerobatic version first flown on 18 November 1987.

Specifications (Discus b)

Instrument panel in a Discus CS.

Data from Jane's All the World's Aircraft 1988-89[1]

General characteristics

Discus a: 6.35 m (20.8 ft)
Discus K: 13.7 m (45 ft)
Discus a: 228 kg (503 lb)

Performance

200 km/h (110 kn; 120 mph) in rough air
180 km/h (97 kn; 110 mph) on aero-tow
150 km/h (81 kn; 93 mph) on winch launch
Discus K: 270 km/h (150 kn; 170 mph)
Discus K:+7 -5
Discus K: 38
Discus K: <0.7 m/s (140 ft/min)

See also

Aircraft of comparable role, configuration and era
Related lists

References

  1. ↑ John W.R. Taylor, ed. (1988). Jane's All the World's Aircraft 1988-89. London: Jane's Information Group. p. 630. ISBN 0-7106-0867-5.

External links

Wikimedia Commons has media related to Schempp-Hirth Discus.
This article is issued from Wikipedia - version of the Wednesday, September 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.