Saxon XVIII H

Saxon XVIII H
DRG Class 18.0
Number(s) 196–205
18 001–010
Quantity 10
Manufacturer Sächsische Maschinenfabrik, Chemnitz
Year(s) of manufacture 1917/18
Retired 1965
Wheel arrangement 4-6-2
Axle arrangement 2'C1' h3
Gauge 1,435 mm
Length 22,150 mm
Height 4,550 mm
Overall wheelbase 11,375 mm
Wheelbase incl. tender 18,597 mm
Empty weight 84.4 t
Service weight 93.5 t
Adhesive weight 50.7 t
Axle load 16.9 t
Top speed 120 km/h
Indicated Power 1,700 PSi
Driving wheel diameter 1,905 mm
Leading wheel diameter 1,065 mm
Trailing wheel diameter 1,260 mm
Valve gear Walschaerts (Heusinger)
No. of cylinders 3
Cylinder bore 500 mm
Piston stroke 630 mm
Boiler Overpressure 14 bar
No. of heating tubes 156
Grate area 4.52 m²
Radiative heating area 15.6 m²
Tube heating area 200.6 m²
Superheater area 72.00 m²
Evaporative heating area 215.76 m²
Tender sä 2'2' T 31
Brakes Westinghouse compressed-air brake

The Saxon Class XVIII \textstyle \mathfrak{H} was a German six-coupled tender locomotive built for the Royal Saxon State Railways (Königlich Sächsische Staatseisenbahnen) in 1917/18 for express train services. The Deutsche Reichsbahn grouped them in 1925 into DRG Class 18.0.

History

After a number of four-cylinder compounds had been taken into service in Saxony, the Saxon XVIII H appeared with a three-cylinder engine based on a Prussian prototype. In 1917 and 1918 the Sächsische Maschinenfabrik in Chemnitz built ten examples of this class.

The newly formed Deutsche Reichsbahn took all 10 locomotives in 1925 over and gave them the numbers 18 001–010.

Locomotive 18 002 was destroyed in the Second World War; the remaining engines went into the Deutsche Reichsbahn in East Germany after the war had ended. They were station at Dresden-Altstadt locomotive depot and were later retired between 1963 and 1965.

Design features

To begin with the Class XIII H had a boiler with a firebox located above the frame. This was made from three boiler rings, the third one being slightly conical in shape. The boiler feedwater was supplied through two steam injectors and a Knorr feedwater pump with preheater. The second injector was later omitted.

The steam engine was configured as a three-cylinder system with simple steam expansion. Two cylinders were located in the usual horizontal position on the outside, the third cylinder was built between the frame sides at an angle. All three cylinders drove the second coupled axle. The gearing of the inside cylinder was operated from the Heusinger valve gear of the outside cylinders via levers and intermediate shafts.

The three coupled axles were fixed in the frame. The leading bogie had a side play of 38 mm, the trailing Adams axle could swing 60 mm to the side.

The locomotive brake was a Westinghouse compressed-air brake. Braking worked on one side of all the carrying and coupled wheels. Some of the locomotives were later equipped with Indusi train protection.

The locomotives were coupled to Saxon sä 2'2' T 31 tenders.

Service

Because the trains on the Central Mountain routes were largely hauled by the powerful successor class, the Saxon XX HV (DRG Class 19.0), the Saxon XVIII Hs were mainly deployed on less hilly lines of DresdenLeipzig and Dresden–Berlin. After the Second World War the nine remaining engines were concentrated in Dresden and were mostly used to haul express services to Berlin.

Sources

See also

External links

This article is issued from Wikipedia - version of the Friday, December 05, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.