Smith & Wesson Model 17

Smith & Wesson Model 17
Smith & Wesson Model 17 K-22 revolver
Type	Double-action revolver
Place of origin	USA
Production history
Manufacturer	Smith & Wesson
Variants	Model 617
Specifications
Length	1947
Barrel length	6 in (150 mm)

Cartridge	.22 Long Rifle
Action	Double-action revolver
Feed system	6 round (Model 17 or earlier 617), or 10 round (Later model 617) cylinder

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

History

Smith & Wesson's Models 16 and 17 have their origins with the company's Pre-World War 2 Hand Ejector series in the 1930s. These 2 revolver models debuted as Companion pieces known as the Models K-22 and K-32 after World War 2. The K-32 Masterpiece (Model 16) debuted in 1935 and was chambered in .32 S&W Long caliber. Production ceased during World War 2 and the revolver was reintroduced in 1947 with the K-22 Masterpiece (Model 17.32 S&W Long caliber.^[1]

The Model 16 was dropped from production in 1983 due to the declining popularity of the .32 S&W Long caliber and the Model 17 was discontinued in 1998 as the company focused less on blued steel revolvers at the time.^[1]

Design

The Model 17 has an adjustable rear sight and an un-pinned, fixed ramp or Patridge style front sight. It was designed as a target revolver and could be ordered from S&W with "The Three T's" : Target Trigger, Target Hammer and Target Grips. Standard barrel lengths were 4", 6" and 8 3/8". The 4" model 17-6 is infrequently seen, as S&W produced the almost identical, 4" barrelled, Model 18. The Model 18 was a Model 17 copy- except the 4" barrel was tapered where the Model 17 4" barrel was not. Many collectors believe the Model 17-6 with the 4" non-tapered barrel was a bit of a production oddity, most probably put together from 6" and 8 3/8" barrels that were cut down to 4" at the factory.^[2]

In 1990, S&W also shipped the Model 17 featuring a 4", 6" or 8 3/8" full under lug barrel. The "under lug" was a solid, blued steel, circular rod, cast as part of the barrel, and running under the barrel from the front of the cylinder yoke to the muzzle's end.. The under lug not only enclosed the ejector rod, it also added considerable weight to the gun itself. The under lug model shipped with a special round butt wood grip that featured inletted finger grooves. The 4" Model 17 Under Lug is infrequently seen and quite possibly manufactured as an afterthought using factory shortened 6" or 8 3/8" under lug barrels.

Derivatives

Model 18 & 617

The Smith & Wesson Model 18 (or the 22 Combat Masterpiece) was built on S&W's "K" Frame, (Smith & Wesson's designation for 'medium frame' firearms.) It was a tapered, 4-inch-barreled, double-action revolver, with adjustable open sights, chambered for the .22 long rifle Many believe the Model 18 was designed as a training weapon for law enforcement officials and others who primarily carried Model 10's, 15's and 19's-.38 Special and .357 caliber revolvers. The Model 18 (like the Model 17) operates and handles in a similar fashion to these law enforcement models of the day; and closely shares the size, weight, grips, internal mechanism, and operation of several popular "K" framed revolvers like the Model 10 (.38 Cal.), Model 13 (.38 & .357 Cal.), Model 14 (.38 Cal.), Model 15 (.38 Cal.) and Model 19 (.38 & .357 Cal.) The only significant difference was the Model 18's .22 caliber.

Model 617 - At the same time S&W introduced the Model 17 full Under Lug, (discontinued in 1998) they also began production of the .22 caliber Model 617. This is the stainless steel version of the blued steel Model 17 .22 LR, however all Model 617's have full, Under Lug barrels. Offered in the same three barrel lengths as the Model 17, the 617 is still in current production and is shipped with rubber grips. The Model 617 is found with a six-shot or ten-shot, steel .22 LR cylinder. The only exception is the early production Model 617-2 which was made with a ten-shot, aluminium alloy .22 LR cylinder. Later "dash 2" 617's were shipped with stainless steel cylinders.^[3]

Model 53

In the late 1950s there was considerable interest in the shooting community for revolvers chambered in various .22 caliber wildcat cartridges. Smith & Wesson sought to take advantage of this by unveiling a cartridge known as the .22 Remington CFM (Centerfire Magnum) cartridge or the .22 Remington Jet and chambered a version of the Model 17 in this caliber designating it the Model 53.^[4]

The Model 53 was manufactured from 1960 to 1974.^[4]

Present State

The Model 17 was discontinued in 1998, but in 2009 was reintroduced as the Model 17 "Masterpiece" due to a resurgence in the popularity of vintage Smith & Wesson revolvers. The company chose approx. fifteen previously discontinued models to produce once again. This was done under the "Classics" category of S&W's current offerings.^[4]

References

1 2 Shideler, Dan (2009). The Gun Digest Book of Modern Gun Values: The Shooter's Guide to Guns 1900-Present. Iola, Wisconsin: Gun Digest Books. p. 215. ISBN 0-89689-824-5.
↑ Supica, Jim; Nahas, Richard (3 January 2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. p. 394. ISBN 0-89689-293-X.
↑ House, James E. (2005). The Gun Digest Book of .22 Rimfire: Rifles·Pistols·Ammunition. Iola, Wisconsin: Gun Digest Books. pp. 268–269. ISBN 1-4402-2664-4.
1 2 3 Mann, Richard Allen; Lee, Jerry (2013). The Gun Digest Book of Modern Gun Values: The Shooter's Guide to Guns 1900-Present. Iola, Wisconsin: Krause Publications. pp. 214–215. ISBN 978-1-4402-3746-1.