Royal Aircraft Factory B.E.10
Royal Aircraft Factory B.E.10 | |
---|---|
Role | Multi-role aircraft |
National origin | British |
Manufacturer | Royal Aircraft Factory |
Status | cancelled |
Number built | 0 |
Developed from | Royal Aircraft Factory B.E.2 |
The Royal Aircraft Factory B.E.10 was an aircraft based on the B.E.2c, designed in May 1914. The aircraft was intended to be built with a fabric-covered steel-tube fuselage with pressed alloy sheet ribs, and full-length ailerons. Its wingspan was slightly less than that of the B.E.2c, while it also had a deeper coaming and utilized an oleo undercarriage with a small "buffer" nosewheel. As well, the aerofoil had a reflex trailing edge.[1] Although 4 units were ordered, they were never completed before the order was cancelled.[2]
Specifications
Data from Kites, Birds & Stuff[2]
General characteristics
- Crew: 2
- Length: 27 ft 1 in (8.26 m)
- Wingspan: 35 ft 8 in (10.87 m)
- Height: 10 ft 9 in (3.28 m)
- Wing area: 355 sq ft (33.0 m2)
- Powerplant: 1 × Renault WB V-8 air-cooled piston engine, 70 hp (52 kW)
Performance
Notes
References
- Hare, Paul R. (1990). The Royal Aircraft Factory. Putnam Aeronautical Books.
|
This article is issued from Wikipedia - version of the Wednesday, June 24, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.