Ross RH-3

RH-3
Role Glider
National origin United States
Manufacturer Marvin Hicks
Designer Harland Ross
First flight 1 January 1963
Primary user Marvin Hicks
Number built One
Developed from Ross R-2

The Ross RH-3 is a single seat, mid-wing glider that was designed by Harland Ross.[1][2]

Design and development

Ross designed the R-3 as simplified version of the Ross R-2 Ibis with the intention of making the aircraft type easier to construct for amateur builders. The fuselage remained similar to the R-2, but the wing was redesigned as a straight wing, in contrast to the R-2's complex gull wing. The R-3 design was intended to be of all-wooden construction and employed a NACA 23018 airfoil section. Ross never constructed an example of the R-3.[1][2]

Marvin Hicks of Aurora, Colorado purchased a set of plans and built a modified version of the aircraft over a ten-year period, culminating in a first flight on 1 January 1963. Hicks' aircraft used an increased span wing with flaps and a NACA 63 (3)-618 laminar flow airfoil. He designated the aircraft as the RH-3, indicating Ross-Hicks as contributing designers. The RH-3 proved to be a good performer in soaring contests.[1][2][3]

Variants

R-3
Original Ross design, with a NACA 23018 airfoil. None built.[1][2]
RH-3
Hicks modified Ross design, with a NACA 63 (3)-618 laminar flow airfoil. One built.[1][2]

Specifications (RH-3)

Data from Sailplane Directory and Soaring[1][2]

General characteristics

Performance

See also


References

  1. 1 2 3 4 5 6 Activate Media (2006). "R-3 Ross". Retrieved 8 March 2011.
  2. 1 2 3 4 5 6 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 60. Soaring Society of America, November 1983. USPS 499-920
  3. Federal Aviation Administration (March 2011). "Make / Model Inquiry Results". Retrieved 8 March 2011.
This article is issued from Wikipedia - version of the Wednesday, June 24, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.