Repulse Power Station
| Repulse Dam | |
|---|---|
  Location of the Repulse Dam in Tasmania | |
| Country | Australia |
| Location | Central Highlands Tasmania |
| Coordinates | 42°30′00″S 146°38′24″E / 42.50000°S 146.64000°ECoordinates: 42°30′00″S 146°38′24″E / 42.50000°S 146.64000°E |
| Purpose | Power |
| Status | Operational |
| Opening date | 1968 |
| Owner(s) | Hydro Tasmania |
| Dam and spillways | |
| Type of dam | Arch dam |
| Impounds | River Derwent |
| Height | 42 metres (138 ft) |
| Length | 433 metres (1,421 ft) |
| Dam volume | 71 thousand cubic metres (2.5×106 cu ft) |
| Spillways | 1 |
| Spillway type | Uncontrolled |
| Spillway capacity | 3,964 cubic metres per second (140,000 cu ft/s) |
| Reservoir | |
| Creates | Lake Repulse |
| Total capacity | 15,900 megalitres (560×106 cu ft) |
| Catchment area | 2,820 square kilometres (1,090 sq mi) |
| Surface area | 15.3 hectares (38 acres) |
| Power station | |
| Name | Repulse Power Station |
| Coordinates | 42°30′25″S 146°38′45″E / 42.50694°S 146.64583°E |
| Operator(s) | Hydro Tasmania |
| Commission date | 1967 |
| Type | Conventional |
| Hydraulic head | 25 metres (82 ft) |
| Turbines | 1 x 29.1 MW (39,000 hp) Boving Kaplan-type turbine |
| Installed capacity | 29.1 megawatts (39,000 hp) |
| Capacity factor | 0.8 |
| Annual generation | 153 gigawatt-hours (550 TJ) |
|
Website hydro | |
| [1] | |
The Repulse Power Station is a conventional hydroelectric power station located in the Central Highlands region of Tasmania, Australia. The power station is situated on the Lower River Derwent catchment and is owned and operated by Hydro Tasmania.
Technical details
Part of the Derwent scheme that comprises eleven hydroelectric power stations, the Repulse Power Station is the eighth power station in the scheme. The power station is located aboveground below Lake Repulse, a small storage created by the concrete arched Repulse Dam on the Derwent River. The facilities at the Repulse Power Station are simple and include the dam, intake structure with intake gate designed to cut off full flow, a short penstock which is integral with the dam, power station building, generator equipment and associated facilities.[2][3]
Approved by the Tasmanian Parliament in 1961, the power station was commissioned in 1967 by the Hydro Electric Corporation (TAS). The station has a single Boving Kaplan-type turbine with a generating capacity of 29.1 megawatts (39,000 hp) of electricity.[4] Within the station building, the turbine has a five-bladed runner and concrete spiral casing. Pre-stressed cables passing through the stay vanes anchor the spiral casing and form part of the station foundation. No inlet valve is installed in the station. The station output, estimated to be 153 gigawatt-hours (550 TJ) annually,[1] is fed to Transend Networks’ transmission grid via two 11 kV/220 kV Siemens generator transformers to the outdoor switchyard.[2]
Water discharged from the Repulse Power Station flows into the River Derwent.[3]
See also
References
- 1 2 "Register of Large Dams in Australia" (Excel (requires download)). Dams information. Australian National Committee on Large Dams. 2010. Retrieved 23 June 2015.
- 1 2 "Repulse Power Station Fact Sheet: Technical fact sheet" (PDF). Energy: Our power stations. Hydro Tasmania. Retrieved 16 January 2015.
- 1 2 "Derwent: Repulse Power Station". Energy. Hydro Tasmania. Retrieved 5 July 2015.
- ↑ Austral Archaeology Pty Ltd; Terry, Ian (April 2007). "Repulse Power Station—Conservation Management Plan" (PDF). Retrieved 1 February 2012.
External links
- Hydro Tasmania page on the Lower Derwent
| ||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||