Renault PR100

A Berliet PR100 in Toulon

The Renault PR100 is a French city bus built and marketed originally by Berliet from 1971, and sold as a Renault following the merging of Berliet into Renault Véhicules Industriels (RVI).

The PR100 was intended to be replaced by the 1987 Renault R312 but sales continued with a revised model called the PR100.2 and in 1993 with a further revised version called the PR112 with the last delivery in 1999. Over 13,500 buses of the PR100 range were produced in France. An articulated version was also produced from 1980, the Renault PR180.2.

PR100 and PR100.2

ACTION Ansair bodied PR100.2 in Canberra in October 2006

The original PR100 was developed and manufactured by Berliet using mainly plans of the German "VÖV-Standard-Linienbus" of the late 1960s. It has an altered front-end and back, and an other interior. In service from June 1972, it was available with a V8 engine producing 178 PS (131 kW; 176 bhp). It was 11.25m long with three variations of seating/standing combinations. By 1979 the PR100 featured the Renault badge.

The PR100 received a slightly altered front end in 1984, along with some technical improvements. This new model was called the PR100.2 and can be identified by the revised front bumper arrangement incorporating the lights.

The PR100 was mainly used in France, with some exported to Algeria and Morocco. The design was used by Jelcz in Poland under license, and large numbers were delivered to many Polish cities. The PR100.2 chassis was also assembled in Spain, with Hispano Carrocera bodywork but retaining the Renault front for early models.

The PR100.2 was available with a Renault MPS turbo diesel 6-cylinder engine with two power options; 206 PS (152 kW; 203 bhp) and 900 N·m (664 lb·ft) or 253 PS (186 kW; 250 bhp) and 1,000 N·m (738 lb·ft). The gearbox was a four-speed ZF automatic unit.^[1]

The PR100.2's body was 11.4m long on a wheelbase of 5.6m and 2.5m wide.

One was bodied in 1988 by Northern Counties for use as a demonstrator in the United Kingdom.

When Renault became the majority shareholder of Mack Trucks, Renault demonstrated the bus in Australia in 1985.^[2] ACTION purchased 258^[3] and Transperth 123 PR100.2s^[4] The ACTION buses were badged as Macks and bodied by Ansair, the Transperth examples as Renaults and bodied in Perth by Howard Porter and JW Bolton. All retained the PR100 front-end.

PR112

A PR112 in Avignon

In 1993 the PR112 was launched as an updated and revised version of the PR100 with a new front end designed by Safra, losing the distinctive windscreen and front quarterlight design.^[5] The last PR112 was delivered in 1999.

The articulated buses PR180 and PR118

A PR180 in Grenoble

Transperth JW Bolton bodied PR180.2 in Perth in November 2006

The PR180 is an articulated version of the PR100 and was referred to in marketing literature as the Megabus. Standard configuration was for 62 seats and 144 standing. The front half retained the 5.6m wheelbase of the PR100, with the rear half being 5.15m and an overall length of 24.38m. Its engined produced 302 PS (222 kW; 298 bhp).^[6]

ACTION purchased 34^[3] and Transperth 65.^[7] The ACTION buses were badged as Macks and bodied by Ansair, the Transperth examples as Renaults and bodied by JW Bolton. All retained the PR100 front-end.

It was replaced in 1993 by the PR112 based PR118.

An ER100 in Grenoble

The trolleybus versions ER100 and PER180

A trolleybus version of the PR100 was produced, called the ER100, and an articulated version with two fronts called the PER180. Berliet and Renault built the ER100 and PER180 for several French cities including Grenoble, Lyon, Marseille, Nancy and Saint-Étienne.

References

Wikimedia Commons has media related to Berliet PR100.

Wikimedia Commons has media related to Renault PR100.

Wikimedia Commons has media related to Renault PR112.