Ray transfer matrix analysis

Ray transfer matrix analysis (also known as ABCD matrix analysis) is a type of ray tracing technique used in the design of some optical systems, particularly lasers. It involves the construction of a ray transfer matrix which describes the optical system; tracing of a light path through the system can then be performed by multiplying this matrix with a vector representing the light ray. The same analysis is also used in accelerator physics to track particles through the magnet installations of a particle accelerator, see Beam optics.

The technique that is described below uses the paraxial approximation of ray optics, which means that all rays are assumed to be at a small angle (θ in radians) and a small distance (x) relative to the optical axis of the system.^[1]

Definition of the ray transfer matrix

The ray tracing technique is based on two reference planes, called the input and output planes, each perpendicular to the optical axis of the system. Without loss of generality, we will define the optical axis so that it coincides with the z-axis of a fixed coordinate system. A light ray enters the system when the ray crosses the input plane at a distance x₁ from the optical axis while traveling in a direction that makes an angle θ₁ with the optical axis. Some distance further along, the ray crosses the output plane, this time at a distance x₂ from the optical axis and making an angle θ₂. n₁ and n₂ are the indices of refraction of the medium in the input and output plane, respectively.

These quantities are related by the expression

{x_2 \choose \theta_2} = \begin{pmatrix} A & B \\ C & D \end{pmatrix}{x_1 \choose \theta_1},

where

A = {x_2 \over x_1 } \bigg|_{\theta_1 = 0} \qquad B = {x_2 \over \theta_1 } \bigg|_{x_1 = 0},

and

C = {\theta_2 \over x_1 } \bigg|_{\theta_1 = 0} \qquad D = {\theta_2 \over \theta_1 } \bigg|_{x_1 = 0}.

This relates the ray vectors at the input and output planes by the ray transfer matrix (RTM) M, which represents the optical system between the two reference planes. A thermodynamics argument based on the blackbody radiation can be used to show that the determinant of a RTM is the ratio of the indices of refraction:

\det(\mathbf{M}) = AD - BC = { n_1 \over n_2 }.

As a result, if the input and output planes are located within the same medium, or within two different media which happen to have identical indices of refraction, then the determinant of M is simply equal to 1.

Note that at least one source^[2] uses a different convention for the ray vectors. The optical direction cosine, n sin θ, is used instead of θ. This would alter some of the ABCD matrices, especially for refraction.

A similar technique can be used to analyze electrical circuits. See Two-port networks.

Some examples

For example, if there is free space between the two planes, the ray transfer matrix is given by:

\mathbf{S} = \begin{pmatrix} 1 & d \\ 0 & 1 \end{pmatrix}

where d is the separation distance (measured along the optical axis) between the two reference planes. The ray transfer equation thus becomes:

{x_2 \choose \theta_2} = \mathbf{S}{x_1 \choose \theta_1}

and this relates the parameters of the two rays as:

\begin{matrix} x_2 & = & x_1 + d\theta_1 \\ \theta_2 & = & \theta_1 \end{matrix}

Another simple example is that of a thin lens. Its RTM is given by:

\mathbf{L} = \begin{pmatrix} 1 & 0 \\ \frac{-1}{f} & 1 \end{pmatrix}

where f is the focal length of the lens. To describe combinations of optical components, ray transfer matrices may be multiplied together to obtain an overall RTM for the compound optical system. For the example of free space of length d followed by a lens of focal length f:

\mathbf{L}\mathbf{S} = \begin{pmatrix} 1 & 0 \\ \frac{-1}{f} & 1\end{pmatrix} \begin{pmatrix} 1 & d \\ 0 & 1 \end{pmatrix} = \begin{pmatrix} 1 & d \\ \frac{-1}{f} & 1-\frac{d}{f} \end{pmatrix}

Note that, since the multiplication of matrices is non-commutative, this is not the same RTM as that for a lens followed by free space:

\mathbf{SL} = \begin{pmatrix} 1 & d \\ 0 & 1 \end{pmatrix} \begin{pmatrix} 1 & 0 \\ \frac{-1}{f} & 1\end{pmatrix} = \begin{pmatrix} 1-\frac{d}{f} & d \\ \frac{-1}{f} & 1 \end{pmatrix}

Thus the matrices must be ordered appropriately, with the last matrix premultiplying the second last, and so on until the first matrix is premultiplied by the second. Other matrices can be constructed to represent interfaces with media of different refractive indices, reflection from mirrors, etc.

Table of ray transfer matrices

for simple optical components

Element	Matrix	Remarks
Propagation in free space or in a medium of constant refractive index	$\begin{pmatrix} 1 & d\\ 0 & 1 \end{pmatrix}$	d = distance
Refraction at a flat interface	$\begin{pmatrix} 1 & 0 \\ 0 & \frac{n_1}{n_2} \end{pmatrix}$	n₁ = initial refractive index n₂ = final refractive index.
Refraction at a curved interface	$\begin{pmatrix} 1 & 0 \\ \frac{n_1-n_2}{R \cdot n_2} & \frac{n_1}{n_2} \end{pmatrix}$	R = radius of curvature, R > 0 for convex (centre of curvature after interface) n₁ = initial refractive index n₂ = final refractive index.
Reflection from a flat mirror	$\begin{pmatrix} 1 & 0 \\ 0 & 1 \end{pmatrix}$	Only valid for mirrors perpendicular to the ray.
Reflection from a curved mirror	$\begin{pmatrix} 1 & 0 \\ -\frac{2}{R_e} & 1 \end{pmatrix}$	$R_e=R\cos\theta$ effective radius of curvature in tangential plane (horizontal direction) $R_e=R/\cos\theta$ effective radius of curvature in the sagittal plane (vertical direction) R = radius of curvature, R > 0 for concave, valid in the paraxial approximation $\theta$ is the mirror angle of incidence in the horizontal plane.
Thin lens	$\begin{pmatrix} 1 & 0 \\ -\frac{1}{f} & 1 \end{pmatrix}$	f = focal length of lens where f > 0 for convex/positive (converging) lens. Only valid if the focal length is much greater than the thickness of the lens.
Thick lens	$\begin{pmatrix} 1 & 0 \\ \frac{n_2-n_1}{R_2n_1} & \frac{n_2}{n_1} \end{pmatrix} \begin{pmatrix} 1 & t \\ 0 & 1 \end{pmatrix} \begin{pmatrix} 1 & 0 \\ \frac{n_1-n_2}{R_1n_2} & \frac{n_1}{n_2} \end{pmatrix}$	n₁ = refractive index outside of the lens. n₂ = refractive index of the lens itself (inside the lens). R₁ = Radius of curvature of First surface. R₂ = Radius of curvature of Second surface. t = center thickness of lens.
Single right angle prism	$\begin{pmatrix} k & \frac{d}{nk} \\ 0 & \frac{1}{k} \end{pmatrix}$	k = (cos $\psi$ /cos $\phi$ ) is the beam expansion factor, where $\phi$ is the angle of incidence, $\psi$ is the angle of refraction, d = prism path length, n = refractive index of the prism material. This matrix applies for orthogonal beam exit.

Resonator stability

RTM analysis is particularly useful when modeling the behaviour of light in optical resonators, such as those used in lasers. At its simplest, an optical resonator consists of two identical facing mirrors of 100% reflectivity and radius of curvature R, separated by some distance d. For the purposes of ray tracing, this is equivalent to a series of identical thin lenses of focal length f=R/2, each separated from the next by length d. This construction is known as a lens equivalent duct or lens equivalent waveguide. The RTM of each section of the waveguide is, as above,

\mathbf{M} =\mathbf{L}\mathbf{S} = \begin{pmatrix} 1 & d \\ \frac{-1}{f} & 1-\frac{d}{f} \end{pmatrix}

RTM analysis can now be used to determine the stability of the waveguide (and equivalently, the resonator). That is, it can be determined under what conditions light travelling down the waveguide will be periodically refocussed and stay within the waveguide. To do so, we can find all the "eigenrays" of the system: the input ray vector at each of the mentioned sections of the waveguide times a real or complex factor λ is equal to the output one. This gives:

\mathbf{M}{x_1 \choose \theta_1} = {x_2 \choose \theta_2} = \lambda {x_1 \choose \theta_1}

which is an eigenvalue equation:

\left[ \mathbf{M} - \lambda\mathbf{I} \right] {x_1 \choose \theta_1} = 0

where I is the 2x2 identity matrix.

We proceed to calculate the eigenvalues of the transfer matrix:

\operatorname{det} \left[ \mathbf{M} - \lambda\mathbf{I} \right] = 0

leading to the characteristic equation

\lambda^2 - \operatorname{tr}(\mathbf{M}) \lambda + \operatorname{det}( \mathbf{M}) = 0

where

\operatorname{tr} ( \mathbf{M} ) = A + D = 2 - { d \over f }

is the trace of the RTM, and

\operatorname{det}(\mathbf{M}) = AD - BC = 1

is the determinant of the RTM. After one common substitution we have:

\lambda^2 - 2g \lambda + 1 = 0

where

g \ \stackrel{\mathrm{def}}{=}\ { \operatorname{tr}(\mathbf{M}) \over 2 } = 1 - { d \over 2 f }

is the stability parameter. The eigenvalues are the solutions of the characteristic equation. From the quadratic formula we find

\lambda_{\pm} = g \pm \sqrt{g^2 - 1} \,

Now, consider a ray after N passes through the system:

{x_N \choose \theta_N} = \lambda^N {x_1 \choose \theta_1}

If the waveguide is stable, no ray should stray arbitrarily far from the main axis, that is, λ^N must not grow without limit. Suppose $g^2 > 1$ . Then both eigenvalues are real. Since $\lambda_+ \lambda_- = 1$ , one of them has to be bigger than 1 (in absolute value), which implies that the ray which corresponds to this eigenvector would not converge. Therefore in a stable waveguide, $g^2$ ≤ 1, and the eigenvalues can be represented by complex numbers:

\lambda_{\pm} = g \pm i \sqrt{1 - g^2} = \cos(\phi) \pm i \sin(\phi) = e^{\pm i \phi}

with the substitution g = cos(ϕ).

For $g^2 < 1$ let $r_+$ and $r_-$ be the eigenvectors with respect to the eigenvalues $\lambda_+$ and $\lambda_-$ respectively, which span all the vector space because they are orthogonal, the latter due to $\lambda_+$ ≠ $\lambda_-$ . The input vector can therefore be written as

c_+ r_+ + c_- r_-

for some constants $c_+$ and $c_-$ .

After N waveguide sectors, the output reads

\mathbf{M}^N (c_+ r_+ + c_- r_-) = \lambda_+^N c_+ r_+ + \lambda_-^N c_- r_- = e^{i N \phi} c_+ r_+ + e^{- i N \phi} c_- r_-

which represents a periodic function.

Ray transfer matrices for Gaussian beams

The matrix formalism is also useful to describe Gaussian beams. If we have a Gaussian beam of wavelength $\lambda_0$ , radius of curvature R, beam spot size w and refractive index n, it is possible to define a complex beam parameter q by:

\frac{1}{q} = \frac{1}{R} - \frac{i\lambda_0}{\pi n w^2}

This beam can be propagated through an optical system with a given ray transfer matrix by using the equation:

{q_2 \choose 1} = k \begin{pmatrix} A & B \\ C & D \end{pmatrix} {q_1 \choose 1}

where k is a normalisation constant chosen to keep the second component of the ray vector equal to 1. Using matrix multiplication, this equation expands as

q_2 = k(Aq_1 + B) \,

and

1 = k(Cq_1 + D) \,

Dividing the first equation by the second eliminates the normalisation constant:

q_2 =\frac{Aq_1+B}{Cq_1+D}

It is often convenient to express this last equation in reciprocal form:

{ 1 \over q_2 } = { C + D/q_1 \over A + B/q_1 } .

Example: Free space

Consider a beam traveling a distance d through free space, the ray transfer matrix is

\begin{bmatrix}A&B\\C&D\end{bmatrix}=\begin{bmatrix}1&d\\0&1\end{bmatrix}

and so

q_2 =\frac{Aq_1+B}{Cq_1+D} = \frac{q_1+d}{1} = q_1+d

That is, traveling through free space increases the radius by d.

Example: Thin lens

Consider a beam traveling through a thin lens with focal length f. The ray transfer matrix is

\begin{bmatrix}A&B\\C&D\end{bmatrix}=\begin{bmatrix}1&0\\-1/f&1\end{bmatrix}

and so

q_2 =\frac{Aq_1+B}{Cq_1+D} = \frac{q_1}{-\frac{q_1}{f}+1}

\frac{1}{q_2} = \frac{-\frac{q_1}{f}+1}{q_1} =\frac{1}{q_1}-\frac{1}{f}

Again, only the real part of q is affected: the reciprocal of the radius of curvature is reduced by 1/f.

References

↑ An exact method for tracing meridional rays is available here.
↑ Gerrard, A.; Burch, J. M. (1975). Introduction to Matrix Methods in Optics.

Bahaa E. A. Saleh and Malvin Carl Teich (1991). Fundamentals of Photonics. New York: John Wiley & Sons. Section 1.4, pp. 26 – 36.

Gerrard, Anthony; Burch, James M. (1994). Introduction to matrix methods in optics. Courier Dover. ISBN 9780486680446.

F. J. Duarte (2003). Tunable Laser Optics. New York: Elsevier-Academic. Chapter 6.

External links

Thick lenses (Matrix methods)
ABCD Matrices Tutorial Provides an example for a system matrix of an entire system.
ABCD Calculator An interactive calculator to help solve ABCD matrices.
Simple Optical Designer (Android App) An application to explore optical systems using the ABCD matrix method.

This article is issued from Wikipedia - version of the Friday, January 29, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Ray transfer matrix analysis

Definition of the ray transfer matrix

Some examples

Table of ray transfer matrices

Resonator stability

Ray transfer matrices for Gaussian beams

Example: Free space

Example: Thin lens

See also

References

External links