Leavening agent

A leavening agent (/ˈlɛvənɪŋ/, also leaven agent; /ˈlɛvən/), also known as a raising agent, is any one of a number of substances used in doughs and batters that causes a foaming action that lightens and softens. The leavening agent incorporates gas bubbles into the dough. The alternative or supplement to leavening agents is mechanical leavening by which air is incorporated by mechanical means. Most leavening agents are synthetic chemical compounds, but carbon dioxide can also be produced by biological agents. When a dough or batter is mixed, the starch in the flour mixes with the water in the dough to form a matrix (often supported further by proteins like gluten or polysaccharides like pentosans or xanthan gum), then gelatinizes and "sets"; the holes left by the gas bubbles remain.

Types of biological leavening agents

• Saccharomyces cerevisiae producing Carbon dioxide found in:
  • baker's yeast
  • beer (unpasteurised—live yeast)
  • ginger beer
  • kefir
  • sourdough starter

• Clostridium perfringens producing Hydrogen found in Salt-rising bread

Chemical leaveners

Chemical leaveners are mixtures or compounds that release gases when they react with each other, with moisture, or with heat. Most are based on a combination of acid (usually a low molecular weight organic acid) and a salt of bicarbonate (HCO₃⁻). After they act, these compounds leave behind a chemical salt. Chemical leaveners are used in quick breads and cakes, as well as cookies and numerous other applications where a long biological fermentation is impractical or undesirable.

History

Chemical leavening were publicized by Amelia Simmons in her American Cookery,^[1] published in 1796, wherein she mentions the use of pearl ash as a leavening agent.

Since chemical expertise is required to create a functional chemical leaven without producing off-flavors from the chemical precursors involved, such substances are often mixed into premeasured combinations for maximum results. These are generally referred to as baking powders. Sour milk and carbonates were used in the 1800s. The breakthrough in chemical leavening agents occurred in the 1930s with the introduction of monocalcium phosphates (Ca(H₂PO₄)₂). Other leavening agents developed include sodium aluminium sulfate (NaAl(SO₄)₂·12H₂O), disodium pyrophosphate (Na₂H₂P₂O₇), and sodium aluminium phosphates (NaH₁₄Al₃(PO₄)₈·4H₂O and Na₃H₁₅Al₂(PO₄)₈). These compounds combine with sodium bicarbonate to give carbon dioxide in a predictable manner.^[2]

Other leaveners

Steam and air are used as leavening agents when they expand upon heating. To take advantage of this style of leavening, the baking must be done at high enough temperatures to flash the water to steam, with a batter that is capable of holding the steam in until set. This effect is typically used in popovers, Yorkshire puddings, and to a lesser extent in tempura.

Nitrous oxide is used as a propellant in aerosol whip cream cans. Large densities of N₂O are dissolved in cream at high pressure. When expelled from the can, the nitrous oxide escapes emulsion instantly, creating a temporary foam in the butterfat matrix of the cream.

Mechanical leavening

Creaming is the process of beating sugar crystals and solid fat (typically butter) together in a mixer. This integrates tiny air bubbles into the mixture, since the sugar crystals physically cut through the structure of the fat. Creamed mixtures are usually further leavened by a chemical leavener like baking soda. This is often used in cookies.

Using a whisk on certain liquids, notably cream or egg whites, can also create foams through mechanical action. This is the method employed in the making of sponge cakes, where an egg protein matrix produced by vigorous whipping provides almost all the structure of the finished product.

The Chorleywood Bread Process uses a mix of biological and mechanical leavening to produce bread; while it is considered by food processors to be an effective way to deal with the soft wheat flours characteristic of British Isles agriculture, it is controversial due to a perceived lack of quality in the final product. The process has nevertheless been adapted by industrial bakers in other parts of the world.

See also

• Unleavened bread
• Baking powder
• Aerated Bread Company, bakeries started in 1862 in the UK that made carbon dioxide leavened bread
• Chametz

References

• Matz, S (1972). "Bakery Technology and Engineering", AVI Publishing Co.

External links

• Wikibooks Cookbook has a recipe/module on Leavening agent

http://www.yrm.org/leaveningagents.htm

Bread List of breads Types Brown bread White bread Whole wheat Flatbread Multigrain bread Quick Rye bread Salt-rising Sandwich bread Soda bread Sourdough Texas toast Unleavened Ingredients Baker's yeast Barm Calcium propanoate Eggs Fat Flour Flour treatment agent Leavening agent Milk Salt Sugar Water Equipment Oven Bread machine Bread pan Dough scraper Farinograph Lame Peel Stand mixer Weighing scales Processes Autolysis Baking Biga Chorleywood bread process Kneading Leavening Maillard reaction No-knead bread Proofing Pre-ferment Pre-slicing Sponge and dough Steaming Straight dough Vienna process Uses Bread crumbs Bread bowl Bread pudding Croutons French toast Stuffing Sandwiches Toast Other Breadmaking Baker percentage History of bread List articles American breads Brand name breads Bread dishes British breads Indian breads Pakistani breads Quick breads Sweet breads Recipes on WikiBooks • Category:Breads • Food portal