R62 (New York City Subway car)

R62 (New York City Subway car)

An R62 train on the leaves Sutter Avenue – Rutland Road.

Interior of an R62 car.
In service 1983–present
Manufacturer Kawasaki Heavy Industries
Built at Kobe, Japan
Replaced R12, R14, R15
Constructed 1983–1985
Number built 325
Number in service 315 (260 in revenue service during rush hours)
Number preserved 2
Number scrapped 8
Formation 5-car sets
Fleet numbers 1301–1625
Capacity 42 (seated-A car)
44 (seated-B car)
Operator(s) New York City Subway
Depot(s) 240th Street Yard, Livonia Yard[1]
Service(s) assigned  – 10 cars
 – 250 cars
Specifications
Car body construction Stainless steel with fiberglass end bonnets
Train length 510.4 feet (155.6 m)
Car length 51.04 feet (15.56 m)
Width 8.60 feet (2,621 mm)
Height 11.89 feet (3,624 mm)
Platform height 3.6458 ft (1.11 m)
Doors 6 per car
Maximum speed 55 mph (89 km/h)
Weight 74,900 pounds (34,000 kg)
(Odd car)
74,540 pounds (33,810 kg)
(Even car)
Traction system General Electric SCM 17KG1924A1 Group as built, Currently Bombardier ECAM Groupswitch
General Electric 1257E1 motors
Power output 115 hp (85.8 kW) on all axles
Acceleration 2.5 mph/s (4.0 km/(h·s))
Electric system(s) 625 V DC Third rail
Current collection method Contact shoe
Braking system(s) WABCO RT2 Braking System
WABCO Tread Brake Unit
Safety system(s) emergency brakes
Coupling system Westinghouse H2C
Track gauge 1,435 mm (4 ft 8 12 in) standard gauge

The R62 is a New York City Subway car built between 1983 and 1985 by Kawasaki Heavy Industries in Kobe, Japan, serving the A Division (IRT). The R62 fleet is numbered 1301–1625, totaling to a number of 325 cars. Each car was purchased at an average price of US$918,293. The R62s were used to replace the remaining R12s, R14s and R15s in service.

History

Car order

After the R36 cars were delivered in 1963–4, no more IRT cars were built for another 20 years, though several rolling stock were proposed for the IRT during this time.[2] In 1966, a lightweight R39 subway car, similar to the ones used on the Market–Frankford Line in Philadelphia, was proposed for their oldest elevated IRT and BMT lines; however, this proposal failed because most of the remaining elevated lines were planned to be torn down and demolished instead. In 1973, another proposal to replace the R12 through R17 series was deferred because not enough voters had approved it.[2] However, in 1979, with the bus and train fleets in poor and decrepit shape, the New York City Transit Authority (NYCTA) was looking into capital maintenance and bond acts to replace its aging fleet of R12s, R14s, R15s and many R17s; and to rebuild or renovate older late 1950s and early 1960s IRT type cars. A bond issue for 136 new IRT cars was approved, and funds were procured for another new 1,014 IRT cars in 1981. These cars were referred to as the "R62" contract.[2] The R62 order was originally proposed as an order of 260 64-foot (20 m) cars, but the selected plan called for 325 51.4-foot (15.7 m) IRT cars instead.

In July 1981, the NYCTA began the bidding process for 325 cars under the R62 contract.[2] Nissho-Iwai American Corp, the parent company of Japanese train car builder Kawasaki Heavy Industries, was the lowest bidder for the initial 325 cars, while American company Budd Company submitted a high bid for the initial contract, and a low bid for the rest of the cars. The NYCTA did not want to award the large contract to a single builder, as it did in 1975–8 with the R46 order, which were plagued by mechanical problems and cracks in the chassis.[2] The R62 contract was ordered on April 12, 1982, and awarded to Kawasaki Heavy Industries. This was the first time a foreign company was chosen to build cars for the New York City Subway.[2] Because a 1981 law now allowed the MTA and suppliers to broker contracts rather than accept the lowest bid, the MTA awarded the base contract to Kawasaki.[3]

Delivery

The R62 was the first stainless steel and air-conditioned subway car built for the "A" Division. A graffiti-resistant glaze was applied to all of the cars because of the extensive graffiti tagging of nearly all of the subway cars in the system since 1971.[4] They continued a controversial interior design by employing bucket seating, which was very narrow with each seat being about 17 inches (430 mm) wide. This reduced the number of seats per car when compared to standard bench seating, but had a higher capacity for standing.[2] This design originated with the R44, and continued with the R62A, R68 and R68A cars and R110B prototype cars.[2] They also feature exterior speakers for the benefit of passengers on the platform. Four cars in the order (1587–90) have prototype bench seating after complaints by passengers upon delivery.[5] Bucket seating is no longer used on the newest New York City Subway cars. The R62 has full-width cabs at the end of 5-car sets, but retains intermediate half-width cabs in the trailer cars.

A 30-day acceptance trial was run on the 7 train in late 1983. The cars entered regular service on the 4 on November 29.[3] At that time, the new cars came as a great relief for IRT riders who were used to non-air conditioned and graffiti-filled trains. Soon after delivery, the cars also proved themselves much less prone to breakdowns than previous rolling stock.[3] All 325 cars were in service by August 1985, making the 4 the first entirely graffiti-free service in the system in many years.[3]

Kawasaki did not want to build the additional cars the MTA wanted as a separate part of the R62 order, under contract R62A, for the same price. Bombardier, an Integrated Transportation rail car company headquartered in Montreal, won a contract to supply these additional 825 cars under a license from Kawasaki.[2][4][3] The R62s currently run on the 3, with one set assigned to the 1.

Replacement

Initial replacement of the R62s is scheduled for 2023 with additional replacements in 2026.[6] The MTA is proposing mid-life technological upgrades for the R62s, including LED destination signs and automated announcements.[7]

Accidents

On August 28, 1991, a sleep-deprived and intoxicated motorman crashed a southbound 4 train north of the 14th Street – Union Square station in Manhattan. The train was diverted from the express track to the local due to repairs, and the motorman sped through the switch at 40 m.p.h.; as a result, the first car made the switch while several other cars in the consist did not. Five riders were killed and several dozen were injured. Cars 1435, 1436, 1437, 1439 and 1440, were wrecked in this accident, and are now all scrapped and off MTA property. The remaining five cars of the consist (cars 1431–1434 and 1438) are now unitized, with 1438 becoming an "A" (cab) car instead of a "B" (trailer) car.[4][8]

On December 21, 1994, disgruntled computer analyst Edward J. Leary firebombed a crowded 4 train at Fulton Street. Car 1391 suffered interior damage and was repaired and returned to service. A little more than three years later, however, on February 3, 1998, cars 1391–1395, while out of service, was rear-ended by another out-of-service train of R33s at the 239th Street Yard. All five cars suffered anticlimber damage, but were repaired and returned to service.

On October 25, 2000, during the 2000 World Series, a rear-end collision occurred at the Fordham Road station on the IRT Jerome Avenue Line in the Bronx.[9] Car 1369 and half of car 1370 was scrapped in 2005. Car 1366 and the undamaged half of car 1370 are at the FDNY Randall's Island training center. Cars 1367, 1368 and 1436 (from the 1991 Union Square derailment) were reefed in February 2008.[10]

See also

References

Further reading

External links

Wikimedia Commons has media related to R62 (New York City Subway car).
This article is issued from Wikipedia - version of the Wednesday, January 27, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.