Protector-class offshore patrol vessel

For other uses, see Protector class.
HMNZS Wellington in September 2010
Class overview
Name: Protector-offshore patrol vessel
Builders: Tenix, Williamstown
Operators:  Royal New Zealand Navy
Preceded by: N/A
Succeeded by: N/A
In commission: 2010
Completed: 2
Active: 2
General characteristics
Type: Offshore patrol vessel
Displacement: 1,900 tonnes
Length: 85 metres
Beam: 14 metres
Draft: 3.6 metres
Propulsion:

Two MAN B&W 12RK280 diesel engines with a continuous rating of 5,400 kW each at 1,000 rpm

450 kW bow thruster

Three MAN diesel electricity generators
Speed:
  • Baseline speed 22 knots (41 km/h; 25 mph)
  • Economical speed 12 knots (22 km/h; 14 mph)
  • Loiter speed 4 to 10 knots (7.4 to 18.5 km/h; 4.6 to 11.5 mph)
Range: 6,000 nautical miles (11,000 km; 6,900 mi) at 15 knots (28 km/h; 17 mph)[1]
Endurance: 21 days
Boats & landing
craft carried:
  • 2 × RHIB (7.74m)
  • 6 × 45 man inflatable rafts
  • 2 × special forces RHIB (11m)
Capacity: 30 passengers, 3 x 20 ft sea container, 1 x 16 tonne, 9-metre crane aft
Complement: 35 + 10 flight personnel + 4 personnel from Government agencies
Sensors and
processing systems:
Fire Control: Optical
Armament:
  • 1 × Remote Controlled Rafael Typhoon 25 mm stabilised naval gun
  • 2 × M2HB QCB .50 calibre Browning machine guns
  • Small arms
Aircraft carried: 1 x Kaman SH-2G Super Seasprite helicopter. Can be armed with a combination of homing torpedoes, depth charges, Maverick Air to Surface missiles, M60 Machine Gun. 1 x A109 light utility helicopter (alternative to Seasprite)
Aviation facilities: Hangar for Seasprite or A109

The Protector-class offshore patrol vessel (also known as the Otago-class) is a ship class of two offshore patrol vessel (OPVs) operated by the Royal New Zealand Navy (RNZN) since 2010. The ships are named HMNZS Otago and HMNZS Wellington.

Key dates

The Ministry of Defence issued invitations to register in July 2002 and signed a contract with Tenix Defence (later BAE Systems) in July 2004. The first steel was cut in February 2005 and the first OPV HMNZS Otago was launched on 18 November 2006 in Melbourne, Victoria.

The original planned delivery date for HMNZS Otago was April 2007, this was then revised to early 2008. HMNZS Wellington was launched on 27 October 2007 with an original delivery date of May / June 2008.

While the ships are capable of carrying the SH-2G Seasprite on 30 October 2007 the NZDF announced the acquisition by NZDF of A109 light utility helicopter for training and deployment on RNZN ships including OPVs.

In September 2008 the Minister of Defence announced delays in delivery of the two OPVs due to questions regarding the ships' seaboats and Lloyds Certification. He says the issue is under negotiation with BAE (ex-Tenix). In May 2009, mediation between the Ministry of Defence and BAE Systems commenced, with the main issue being the estimated 300 tonnes increase in weight which could cause potential hazard when OPVs are in ice in Antarctica as the weight increased over the life of the vessels.

On the 18 February 2010 Otago was accepted into the Royal New Zealand Navy.[2] NZ Ministry of Defence claims overweight issue not as bad as previously thought, but "weight will have to be carefully monitored during the ship's life". Should arrive at Devonport (Auckland) Naval Base 26 March 2010. Wellington was accepted on 6 May 2010 and arrived at Devonport later that month. HMNZS Otago arrived at Devonport Naval Base after further delay in Australia due to engine problems, now fixed under warranty.

Design origin

Conceived as part of Project Protector, the Ministry of Defence project consisted of acquiring one multi-role vessel, two offshore and four inshore patrol vessels. The Project Protector vessels will be operated by the RNZN to conduct tasks for and with the New Zealand Customs Service, the Department of Conservation, Ministry of Foreign Affairs and Trade, Ministry of Fisheries, Maritime New Zealand, and New Zealand Police. The Government and Navy policy was the OPVs are intended to carry out resource protection functions in the EEZ, Sth Pacific and Southern Ocean, to free the 2 Anzac frigates for other needs. However, with the capability to carry and sustain a missile armed RNZN helicopter they do have limited higher contingency capability.

The vessels were designed by STX Canada Marine (formerly Kvaerner Masa Marine) and are based on earlier OPV designs in service with the Irish Naval Service (since 1999) and the Mauritian Coast Guard (since 1996). However the adopted design is considerably upgraded, in that the Irish Naval Service no longer included helicopter facilities in its designs after the failure of helicopter operations from the OPV LE Eithne in the rough seas off the Irish west coast. The Otago, however, includes helicopter facilities similar to the arrangements of the earlier Irish OPV, LE Eithne, which were based on the British Leander, which modification to operate larger Lynx/Seasprite helicopters is based on the design of the last RNZN Leander, HMNZS Canterbury. The vessel is compliant with all of the operational requirements for patrol and response, cargo carriage and handling, sea keeping for sea boat and helicopter operations, and has a high level of comfort for crew and client agency officials.

The design and fitting of the OPVs was contested by the Executive, MOD, MFAT and the Navy. In June 2004 it was decided to use the remaining Budget allocation to fit the OPVs with ice strengthening, described by Deputy Secretary of Defence, Bruce Green, as a simple alteration which would add little cost, rather than use the money to fit the OPVs with a 57mm or 76mm small corvette type GP gun fitted to all post 1980 Irish OPVs including, Ireland's latest order for a stretched 90 Metre OPV[3] or upgraded sensors given that military and civilian threat to territorial threats to the EEZ and NZ cannot be precisely differentiated. In reality the ice-strengthened belt resulted in the OPVs being 300 ton overweight and required much time and $84 million expenditure to modify.[4] HMNZS Wellington performed well in sea state 7/8 in the Ross Ice Shelf in appalling conditions in Feb 2012 but still has only half the margin of the ordered specifications, limiting future modernisation and service life, given the inevitable increase in weight during the course of warships life. Also at issue was a third OPV[5] rather than the IPVs strongly backed by Ministry of Fisheries and Defence Minister, Phil Goff, which lacked military relevance other than reserve and command training.[6]

Names

On 31 March 2006, Minister of Defence Phil Goff announced that the OPVs will be named HMNZS Otago and HMNZS Wellington. Otago and Wellington are the names of frigates previously operated by the RNZN. These ships will carry the honour board of their predecessors, and the heritage so represented.

An NZDF media release on 31 March 2006 gave pennant numbers for Otago (P148) and Wellington (P55). Wellington's pennant number recalls HMNZS Waikato (F55).

Characteristics

EEZ patrol and response

Ice strengthening

See also

References

  1. Protector Class Offshore Patrol Vessels, New Zealand naval-technology.com. Retrieved 22 March 2011.
  2. "Navy takes delivery of first OPV". Parliament of New Zealand. 18 February 2010. Retrieved 25 February 2010.
  3. K. Tringham. Appeldore's New OPV. Janes Navy International, June 2012, p9
  4. J.Tringham. Flexible Fleet Strategic Sealift & Ocean Patrol on a Shoestring. Janes Navy International, V 117. June 2012, 18-27.
  5. E. Read. NZ Herald 13-7-2002
  6. G.Till. Seapower. 2009

External links

Wikimedia Commons has media related to Protector class offshore patrol vessels.
This article is issued from Wikipedia - version of the Monday, February 15, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.