Precipitation (chemistry)

This article is about the chemical phenomenon. For other uses, see Precipitation (disambiguation).
"Precipitate" redirects here. For other uses, see Precipitate (disambiguation).
Chemical Precipitation

Precipitation is the creation of a solid from a solution. When the reaction occurs in a liquid solution, the solid formed is called the 'precipitate'. The chemical that causes the solid to form is called the 'precipitant'. Without sufficient force of gravity (settling) to bring the solid particles together, the precipitate remains in suspension. After sedimentation, especially when using a centrifuge to press it into a compact mass, the precipitate may be referred to as a 'pellet'. The precipitate-free liquid remaining above the solid is called the 'supernate' or 'supernatant'. Powders derived from precipitation have also historically been known as 'flowers'.

Sometimes the formation of a precipitate indicates the occurrence of a chemical reaction. If silver nitrate solution is poured into a solution of sodium chloride, a chemical reaction occurs forming a white precipitate of silver chloride. When potassium iodide solution reacts with lead nitrate solution, a yellow precipitate of lead iodide is formed.

Precipitation may occur if the concentration of a compound exceeds its solubility (such as when mixing solvents or changing their temperature). Precipitation may occur rapidly from a supersaturated solution.

In solids, precipitation occurs if the concentration of one solid is above the solubility limit in the host solid, due to e.g. rapid quenching or ion implantation, and the temperature is high enough that diffusion can lead to segregation into precipitates. Precipitation in solids is routinely used to synthesize nanoclusters.[1]

An important stage of the precipitation process is the onset of nucleation. The creation of a hypothetical solid particle includes the formation of an interface, which requires some energy based on the relative surface energy of the solid and the solution. If this energy is not available, and no suitable nucleation surface is available, supersaturation occurs.

Applications

Crystals of meso-tetratolylporphyrin from a reflux of propanoic acid precipitate on cooling
Copper from a wire displaces silver in a silver nitrate solution it is dipped into, and solid silver precipitates out.

Precipitation reactions can be used for making pigments, removing salts from water in water treatment, and in classical qualitative inorganic analysis.

Precipitation is also useful to isolate the products of a reaction during workup. Ideally, the product of the reaction is insoluble in the reaction solvent. Thus, it precipitates as it is formed, preferably forming pure crystals. An example of this would be the synthesis of porphyrins in refluxing propionic acid. By cooling the reaction mixture to room temperature, crystals of the porphyrin precipitate, and are collected by filtration:[2]

Precipitation may also occur when an antisolvent (a solvent in which the product is insoluble) is added, drastically reducing the solubility of the desired product. Thereafter, the precipitate may easily be separated by filtration, decanting, or centrifugation). An example would be the synthesis of chromic tetraphenylporphyrin chloride: water is added to the DMF reaction solution, and the product precipitates.[3] Precipitation is also useful in purifying products: crude bmim-Cl is taken up in acetonitrile, and dropped into ethyl acetate, where it precipitates.[4] Another important application of an antisolvent is in ethanol precipitation of DNA.

In metallurgy, precipitation from a solid solution is also a useful way to strengthen alloys; this process is known as solid solution strengthening.

Representation using chemical equations

An example of a precipitation reaction: Aqueous silver nitrate (AgNO3) is added to a solution containing potassium chloride (KCl), the precipitation of a white solid, silver chloride (AgCl), is observed. (Zumdahl, 2005)

AgNO3 (aq) + KCl (aq) → AgCl (s) + KNO3 (aq)

The silver chloride (AgCl) has formed a solid, which is observed as a precipitate.

This reaction can be written emphasizing the dissociated ions in a combined solution. This is known as the ionic equation.

Ag+ (aq) + NO3− (aq) + K+ (aq) + Cl− (aq) → AgCl (s) + K+ (aq) + NO3− (aq)

A final way to represent a precipitate reaction is known as a net ionic reaction. In this case, any spectator ions (those that do not contribute to the reaction) are left out of the formula completely. This simplifies the above equations to the following:

Ag+ (aq) + Cl− (aq) → AgCl (s)

Precipitate colors

Many compounds containing metal ions produce precipitates with distinctive colors. The following are typical colors for various metals. However, many of these compounds can produce colors very different from those listed.

Gold Orange
Chromium Deep green, murky green, orange, purple, yellow, brown
Cobalt Pink
Copper Blue
Iron (II) Green
Iron (III) Reddish brown
Manganese Pale pink
Nickel Green

Other compounds generally form white precipitates.

Anion/Cation Analysis

Precipitate formation is useful in the detection of the type of cation in a salt. To do this, an alkali first reacts with the unknown salt to produce a precipitate that is the hydroxide of the unknown salt. To identify the cation, the color of the precipitate and its solubility in excess are noted. Similar processes are often used in sequence - for example, a barium nitrate solution will react with sulfate ions to form a solid barium sulfate precipitate, indicating that it is likely that sulfate ions are present.

Digestion

Digestion, or precipitate ageing, happens when a freshly formed precipitate is left, usually at a higher temperature, in the solution from which it precipitates. It results in cleaner and bigger particles. The physico-chemical process underlying digestion is called Ostwald ripening.

See also

References

  1. ↑ Dhara, S. (2007). "Formation, Dynamics, and Characterization of Nanostructures by Ion Beam Irradiation". Critical Reviews in Solid State and Materials Sciences 32 (1): 1–50. doi:10.1080/10408430601187624.
  2. ↑ A. D. Adler; F. R. Longo; J. D. Finarelli; J. Goldmacher; J. Assour; L. Korsakoff (1967). "A simplified synthesis for meso-tetraphenylporphine". J. Org. Chem. 32 (2): 476–476. doi:10.1021/jo01288a053.
  3. ↑ Alan D. Adler; Frederick R. Longo; Frank Kampas; Jean Kim (1970). "On the preparation of metalloporphyrins". Journal of Inorganic and Nuclear Chemistry 32 (7): 2443. doi:10.1016/0022-1902(70)80535-8.
  4. ↑ Dupont, J., Consorti, C., Suarez, P., de Souza, R. (2004). "Preparation of 1-Butyl-3-methyl imidazolium-based Room Temperature Ionic Liquids". Org. Synth.; Coll. Vol. 10, p. 184

5. Precipitaion colours - From Chemistry For Wa Stage 2 Units 2a and 2b by Chris Lewis and Peter Lewis

Further reading

External links

Wikimedia Commons has media related to Solid precipitation.
This article is issued from Wikipedia - version of the Saturday, January 30, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.