Potters For Peace

Potters For Peace
Date founded 1986
Location of Headquarters Boulder, CO
Projects

Potters Teaching Potters
Technical and Design Assistance
Fuel Efficient Kilns
Alternative Fuel Burners
Ceramic Raw Materials Research
Marketing
Ceramic Water Purifiers
Potter at work

Potters for Peace is a nonprofit organization that has created a network of potters and other relevant parties to improve quality of life and preserve tradition using local skills and materials. PFP primarily works in Central America and has headquarters in Boulder, Colorado.[1] PFP manages projects that help local potters to improve and market their products. PFP is best known for their work in water treatment, which has influenced water treatment systems worldwide. The treatment strategy follows a Point-of-Use (POU) water treatment design that uses ceramic water filters to remove pathogens and other contaminants from the water. This is generally a very effective method to remove bacteria from water, though there are some concerns about the ease of use and maintenance of the filtration units. Unlike other similar organizations, PFP does not manufacture these filters, but instead helps local communities to set up independent filter workshops to produce and sell the filters.[2]

Mission

Potters for Peace is clear to assert itself as an assistance organization, rather than an aid-based organization. Instead of simply solving the problem, PFP aims to provide sustainable solutions propelled by the goals of the individuals they work with. According to the Potters for Peace website, "Our goals are to offer support, solidarity and friendship to developing world potters; assist with appropriate technologies sustained using local skills and materials; help preserve cultural traditions; and assist in marketing locally, regionally and internationally".[2]

History

Potters for Peace got its start in 1986 when a group of potters led by Mary Chapman and Dolly Pomerleau of the Quixote Center in Washington DC traveled to Nicaragua. The potters met with a female pottery/canning cooperative. This led to the first PFP fundraiser in Washington, DC.[1] The program began to gain momentum after the Nicaraguan civil war to help pottery cooperatives.[3] In 1988, the first contact in Nicaragua was made. A year later Steve Earp and Ron Rivera were sent. Ron Rivera helped make tenmoku glazed ceramics for electrical transmission lines. Over the next decade, PFP grew in size, finally receiving 501(c) (3) non-profit status in 1999 in the US. PFP later obtained non-governmental organization status in Nicaragua.[2]

The best known PFP project, ceramic water filters, was begun when in 1998 Hurricane Mitch struck Central America. A filter workshop was set up in 1999. This workshop developed into an independent business that has implemented more than 40,000 filters in collaboration with several NGOs. PFP takes pride in the fact that it does not operate any filter workshops, but instead trains local potters to produce and distribute the filters.[2]

Potters Without Borders

Potters Without Borders registered as a Non-Profit society in British Columbia, Canada in 2006 is the sister organization of Potters For Peace and works on projects together with PFP. PWB is based in Enderby, British Columbia, Canada with offices in Clare, Nova Scotia and Ningming, Guangxi-Zhuang, China.[4]

Projects

PFP has been active with several programs in Nicaragua since 1989.[2] These programs emphasize the mission of PFP to help local potters succeed in their own right. Many of these projects center around helping potters market their products locally and abroad (PFP help organized an 18,000 piece sale to Pier 1 from a Nicaraguan cooperative, though this may have had negative long-term results) or use their skills to create new products that solve a local issue.[5]

Potters Teaching Potters

The goals of the Potters Teaching Potters project is to share skills and knowledge about pottery. It allows campesina potters to travel in their country and abroad by providing transportation and expenses. Additionally, PFP finances scholarships for apprenticeships and holds conferences that bring together both Nicaraguan potters and also international buyers which help potters learn how to market their products abroad.

Technical and Design Assistance

As part of the Technical and Design Assistance program, Potters for Peace give access to necessary tools along with training on items such as energy-efficient kilns. Pottery designs are constantly being refined to fit the needs of their customers.

Fuel Efficient Kilns

The Fuel Efficient Kiln project was begun when volunteer Manny Hernandez designed a kiln that uses 50% less firewood to fire pottery. These kilns, called "Mani" kilns, have been built worldwide, totaling at least 60 so far.

Alternative Fuel Burners

Along with helping potters with starting up their practices, PFP helps maintain this profession by utilizing agricultural and construction waste as fuel for firing pottery as part of the Alternative Fuel Burners project. As firewood becomes more and more expensive, PFP keeps sustainability at the forefront of their projects by pushing for alternative and local fuels.

Ceramic Raw Materials Research

Potters for Peace has a materials research facility in Nicaragua where different combinations of ceramics are tested for their different properties for the Ceramic Raw Materials Research project. Also, PFP pays some of its potters to do their own materials research.

Marketing

Pieces made by these local potters are marketed in several ways. PFP developed a system of road signs that alert people to the availability of pottery. Funding is given for these potters to attend artisan fairs, where they show their wares and make connections.

Ceramic Water Purifiers

The manufacturing process is quite simple. A press forms the pot shape out of clay mixed with rice husks. The pot is fired, and the husk burns, leaving small holes that the water can run through. Finally the filters are coated with colloidal silver. The filters are used with plastic storage units to collect the water.[6]

The efficacy of the PFP filter has been assessed by several independent organizations. It is reported to remove up to 99.9% of fecal coliform under laboratory conditions; however, this removal rate can vary greatly under usage in the field [7]

Efficacy of the CPW filters also depends on the flow rates through the filter. Lower flow rates have led to disuse of the filter. It is found that a filter manufactured with a clay to sawdust volume fraction of 1:1 was found optimal for field use. An elaborate study illustrated that the flow rate through the 1:1 CPW followed a hyperbolic relationship with time.[8] This study also discussed the relationship between flow rate from the CPW filters and quantity of materials (Clay and Sawdust) used in the manufacture of the filters.

The long-term sustainability of CPWs has also been assessed. It has been found that the CPWs have a disuse rate of 2% per month, with 67% of this disuse resulting from filter breakage. This leads to a mean usage lifetime of 2 years.[9] This may or may not be appropriate for a given situation. The strength of the ceramic water filter materials as a function on clay and organic materials like sawdust, ash etc. have been performed.[10] Economics and supply chain would have to be assessed before considered CWPs as a solution to a water problem.

References

  1. 1 2 Rarick, Charles A. and Duchatelet, Martine. Potters for Peace: Throwing Clay in Nicaragua for Peace and Profit. 2006. Journal Of the International Academy for Case Studies. 12:141-144
  2. 1 2 3 4 5 Potters for Peace, accessed October 28, 2009
  3. Visiting Potters in Nicaragua, Pillers, B.T., 1998, Ceramics Monthly, 46:16, accessed October 28, 2009
  4. Potters Without Borders Canada, Ben Sanami/Morrill, Potters Without Borders, September 2006.
  5. Investigation of the Potters For Peace Colloidal Silver Impregnated Ceramic Filter, Daniele S. Lantagne, December 21, 2001, accessed October 29, 2009
  6. A Simple Way to Make Bad Water Safe, Jen Banbury, UNICEF USA, October 15, 2008, accessed October 28, 2009.
  7. Reconsidering appropriate technology: the effects of operating conditions on the bacterial removal performance of two household drinking-water filter systems, Baumgartner, J., Murcott, S., and Ezzati, M. 2007. Environmental Research Letters, accessed October 28, 2009.
  8. Theoretical and Experimental Investigation of Water Flow through Porous Ceramic Clay Composite Water Filter, A. K. Plappally, I. Yakub, L. C. Brown, W. O. Soboyejo and A. B. O. Soboyejo. FDMP: Fluid Dynamics & Materials Processing, Vol. 5, No. 4, pp. 373-398, 2009, accessed Nov 01, 2010.
  9. Point of Use Household Drinking Water Filtration: A Practical, Effective Solution for Providing Sustained Access to Safe Drinking Water in the Developing World, Sobsey, M.D., Stauber, C.E., Casanova, L. M., Brown, J. M., Elliott, M.A., 2008, “Environmental Science and Technology”, 42 (12), 4261-4267, accessed October 28, 2009.
  10. Physical Properties of Porous Clay Ceramic-Ware, A. K. Plappally, I. Yakub, L. C. Brown, W. O. Soboyejo and A. B. O. Soboyejo. J. Eng. Mater. Technol. 2011, 133(3), 031004, (9 pages), accessed May 25, 2011.
This article is issued from Wikipedia - version of the Monday, November 02, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.