Polythionic acid

Skeletal formula of polythionic acid

Polythionic acid is an oxoacid which has a straight chain of sulfur atoms and has the chemical formula H₂S_nO₆ (n > 2). Trithionic acid (H₂S₃O₆), tetrathionic acid (H₂S₄O₆) are simple examples. The compounds of n < 80 are expected to exist, and those of n < 20 have already been synthesized. Dithionic acid (H₂S₂O₆) does not belong to polythionic acid due to the difference in the property.

Nomenclature

All polythionates anion contains chains of sulfur atoms attached to the terminal SO₃H-groups. Names of polithionic acids are determined by the number of atoms in the chain of sulfur atoms:

• H
  2S
  2O
  6 - dithionic acid
• H
  2S
  3O
  6 - trithionic acid
• H
  2S
  4O
  6 - tetrathionic acid
• H
  2S
  5O
  6 - pentathionic acid, etc.

History

Numerous acids and salts of this group have a venerable history, and chemistry systems, where they exist, dates back to the studies John Dalton devoted to the behavior of H
2S in aqueous solutions of SO
2 (1808). This solution now has the name of Heinrich Wilhelm Ferdinand Wackenroder, who conducted a systematic study (1846). Over the next 60–80 years, numerous studies have shown the presence of ions, in particular tetrathionate and pentathionate anion (S₄O₆²⁻ and S₅O₆²⁻, respectively).

Preparation and Properties

In the last few decades in the work of Schmidt and other scientists in Germany, a new idea formed: as H
2S can react with SO
3 or HSO
3Cl, forming thiosulfuric acid H
2S
2O
3, as the analogous reaction with H
2S
2 forms disulfonmonosulfonic acid H
2S
2SO
3H; similarly polysulfanes H₂S_n (n = 2-6) give HS_nSO₃H. Reactions from both ends of the polysulfane chain lead to the formation of polysulfondisulfonic acid HO₃SS_nSO₃H.

There are many known methods for the synthesis of these acids, but the reaction mechanism is unclear because of the large number of simultaneously occurring and competing reactions such as redox, chain transfer, and disproportionation. Typical examples are:

• Interaction between hydrogen sulfide and sulfur dioxide. This yields a complex mixture of various oxyacids of sulfur of different structures, called Wackenroder solution.

H₂S + H₂SO₃ → H₂S₂O₂ + H₂O

H₂S₂O₂ + 2H₂SO₃ → H₂S₄O₆ + 2H₂O

H₂S₄O₆ + H₂SO₃ → H₂S₃O₆ + H₂S₂O₃

• Reactions of sulfur halides with HSO₃⁻ or HS₂O₃⁻, for example :

SCl₂ + 2HSO₃⁻ → [O₃SSSO ₃]²⁻ + 2HCl

S₂Cl₂ + 2HSO₃⁻ → [O ₃SS₂SO₃]²⁻ + 2HCl

SCl₂ + 2HS₂O₃⁻ → [O₃SS₃SO₃]²⁻ + 2HCl

• The oxidation of thiosulfate with mild oxidizing agents such as I₂, Cu²⁺, S₂O₈²⁻, H₂O₂, MnO₂.
• Various special methods of synthesis.

Dithionate ion is obtained by oxidation of aqueous sulfur dioxide in a powder suspension of manganese or iron oxide (MnO₂, Fe₂O₃):

MnO₂ + 2SO₂ → MnS₂O₆

Trithionate ion synthesized by oxidation of thiosulfate ions with hydrogen peroxide:

2S₂O₃²⁻ + 4H₂O₂ → S₃O₆²⁻ + SO₄²⁻ + 4H₂O

Tetrathionate ion can be obtained by oxidation of thiosulfate ion with iodine (reaction is used in iodometry):

S₂O₃²⁻ + I₂ → S₄O₆²⁻ + 2I⁻

Pentathionate ion is obtained by the action of SCl₂ on the thiosulfate ion and Wackenroder solution by adding to it potassium acetate. Initially prismatic crystals of potassium tetrathionate fall, then lamellar crystals of potassium pentathionate, from which the influence of tartaric acid makes an aqueous solution of pentathionic acid.

For potassium hexathionate K₂S₆O₆ the best synthesis action is combining KNO₂ and K₂S₂O₃ in concentrated HCl at low temperatures.

Anhydrous polythionic acids can be formed in diethyl ether solution by the following three general ways:

HS_nSO₃H + SO₃ → H₂S_n+2O₆ (n = 1, 2 … 8)

H₂S_n + 2SO₃ → H₂S_n+2O₆ (n = 1, 2 … 8)

2HS_nSO₃H + I₂ → H₂S_2n+2O₆ + 2HI (n = 1, 2 … 6)

More complex polythionates, with the number of sulfur atoms being 23, form by reacting thiosulfate with SCl₂ and S₂Cl₂.

Polythionic acids with a small number of sulfur atoms in the chain (x = 3 - 6) are the most stable. Polythionic acids are stable only in aqueous solutions, and are rapidly destroyed at higher concentrations with the release of sulfur, sulfur dioxide and - sometimes - sulfuric acid. Acid salts of polythionic acids do not exist. Polythionate ions are significantly more stable than the corresponding acids.

Under the action of oxidants (potassium permanganate, potassium dichromate) polythionic acids and their salts are oxidized to sulfate, and the interaction with strong reducing agents (amalgam of sodium) converts them into sulfites and dithionites.

Occurrence

Polythionic acids are often found in crater lakes. There are various kinds of ions containing sulfur atoms derived by hydrogen sulfide and they make the strongly acidic conditions. It is observed that polythionates in crater lakes are drastically decreased before an eruption occurs.^[1] The phenomenon may be useful to predict volcanic activity.

References

• Волынский Н. П., Тиосерная кислота. Политионаты. Реакция Вакенродера. - М.: Наука, 1971. - 80 с.
• Бусев А. И., Симонова Л. Н. Аналитическая химия серы. - М.: Наука, 1975. - 272 с.
• Реми Г. Курс неорганической химии, т.1. М.: Издательство иностранной литературы, 1963. - 921 с.
• Гринвуд Н. Химия элементов: в 2 томах. М.: БИНОМ, 2008. 2 т. - 670 с.