Photosynthesis system

Photosynthesis systems are electronic scientific instruments designed for non-destructive measurement of photosynthetic rates in the field. Photosynthesis systems are commonly used in agronomic and environmental research, as well as studies of the global carbon cycle.

How photosynthesis systems function

Photosynthesis systems function by measuring gas exchange of leaves. Atmospheric carbon dioxide is taken up by leaves in the process of photosynthesis, where CO2 is used to generate sugars in a molecular pathway known as the Calvin cycle. This draw-down of CO2 induces more atmospheric CO2 to diffuse through stomata into the air spaces of the leaf. While stoma are open, water vapor can easily diffuse out of plant tissues, a process known as transpiration. It is this exchange of CO2 and water vapor that is measured as a proxy of photosynthetic rate.

The basic components of a photosynthetic system are the leaf chamber, infrared gas analyzer (IRGA), batteries and a console with keyboard, display and memory. Modern 'open system' photosynthesis systems also incorporate miniature disposable compressed gas cylinder and gas supply pipes. This is because external air has natural fluctuations in CO2 and water vapor content, which can introduce measurement noise.[1] Modern 'open system' photosynthesis systems remove the CO2 and water vapour by passage over soda lime and Drierite, then add CO2 at a controlled rate to give a stable CO2 concentration.[1] Some systems are also equipped with temperature control and a removable light unit, so the effect of these environmental variables can also be measured.

The leaf to be analysed is placed in the leaf chamber. The CO2 concentrations is measured by the infrared gas analyzer.[2] The IRGA shines infrared light through a gas sample onto a detector. CO2 in the sample absorbs energy, so the reduction in the level of energy that reaches the detector indicates the CO2 concentration. Modern IRGAs take account of the fact that H2O absorbs energy at similar wavelengths as CO2.[1][3][4] Modern IRGAs may either dry the gas sample to a constant water content or incorporate both a CO2 and a water vapour IRGA to assess the difference in CO2 and water vapour concentrations in air between the chamber entrance and outlet.[1]

The Liquid Crystal Display on the console displays measured and calculated data. The console may have a PC card slot. The stored data can be viewed on the LCD display, or sent to a PC. Some photosynthesis systems allow communication over the internet using standard internet communication protocols.

Modern photosynthetic systems may also be designed to measure leaf temperature, chamber air temperature, PAR (photosynthetically active radiation), and atmospheric pressure. These systems may calculate water use efficiency (A/E), stomatal conductance (gs), intrinsic water use efficiency (A/gs), and sub-stomatal CO2 concentration (Ci).[3] Chamber and leaf temperatures are measured with a thermistor sensor. Some systems are also designed to control environmental conditions.

A simple and general equation for Photosynthesis is: CO2+ H2O+ (Light Energy)→ C6H12O6+O2

'Open' systems or 'closed' systems

There are two distinct types of photosynthetic system; ‘open’ or ‘closed’.[1] This distinction refers to whether or not the atmosphere of the leaf-enclosing chamber is renewed during the measurement.[1][4]

In an ‘open system’, air is continuously passed through the leaf chamber to maintain CO2 in the leaf chamber at a steady concentration.[1] The leaf to be analysed is placed in the leaf chamber. The main console supplies the chamber with air at a known rate with a known concentration of CO2 and H2O.[2] The air is directed over the leaf, then the CO2 and H2O concentration of air leaving the chamber is determined.[1] The out going air will have a lower CO2 concentration and a higher H2O concentration than the air entering the chamber. The rate of CO2 uptake is used to assess the rate of photosynthetic carbon assimilation, while the rate of water loss is used to assess the rate of transpiration. Since CO2 intake and H2O release both occur through the stomata, high rates of CO2 uptake are expected to coincide with high rates of transpiration. High rates of CO2 uptake and H2O loss indicates high stomatal conductance.[5]

Because the atmosphere is renewed, 'open' systems are not seriously affected by outward gas leakage and adsorption or absorption by the materials of the system.[1]

In contrast, in a ‘closed system’, the same atmosphere is continuously measured over a period of time to establish rates of change in the parameters.[6] The CO2 concentration in the chamber is decreased, while the H2O concentration increases. This is less tolerant to leakage and material ad/absorption.

Calculating photosynthetic rate and related parameters

Calculations used in 'open system' systems;

For CO2 to diffuse into the leaf, stomata must be open, which permits the outward diffusion of water vapour. Therefore, the conductance of stomata influences both photosynthetic rate (A) and transpiration (E), and the usefulness of measuring A is enhanced by the simultaneous measurement of E. The internal CO2 concentration (Ci) is also quantified, since Ci represents an indicator of the availability of the primary substrate (CO2) for A.[3][5]

A carbon assimilation is determined by measuring the rate at which the leaf assimilates CO2 .[5] The change in CO2 is calculated as CO2 flowing into leaf chamber, in μmol mol−1 CO2, minus flowing out from leaf chamber, in μmol mol−1. The photosynthetic rate (Rate of CO2 exchange in the leaf chamber) is the difference in CO2 concentration through chamber, adjusted for the molar flow of air per m2 of leaf area, mol m−2 s−1.

The change in H2O vapour pressure is water vapour pressure out of leaf chamber, in mbar, minus the water vapour pressure into leaf chamber, in mbar. Transpiration rate is differential water vapour concentration, mbar, multiplied by the flow of air into leaf chamber per square meter of leaf area, mol s−1 m−2, divided by atmospheric pressure, in mBar.

Calculations used in 'closed system' systems;

A leaf is placed in the leaf-chamber, with a known area of leaf enclosed. Once the chamber is closed, carbon dioxide concentration gradually declines. When the concentration decreases past a certain point a timer is started, and is stopped as the concentration passes at a second point. The difference between these concentrations gives the change in carbon dioxide in ppm.[6] Net photosynthetic rate in micro grams carbon dioxide s−1 is given by;

(V • p • 0.5 • FSD • 99.7) / t[6]

where V = the chamber volume in liters, p = the density of carbon dioxide in mg cm−3, FSD = the carbon dioxide concentration in ppm corresponding to the change in carbon dioxide in the chamber, t = the time in seconds for the concentration to decrease by the set amount. Net photosynthesis per unit leaf area is derived by dividing net photosynthetic rate by the leaf area enclosed by the chamber.[6]

Applications

Since photosynthesis, transpiration and stomatal conductance are an integral part of basic plant physiology, estimates of these parameters can be used to investigate numerous aspects of plant biology. The plant-scientific community has generally accepted photosynthetic systems as reliable and accurate tools to assist research. There are numerous peer-reviewed articles in scientific journals which have used a photosynthetic system. To illustrate the utility and diversity of applications of photosynthetic systems, below you will find brief descriptions of research using photosynthetic systems;

Alphabetical list of system models

This list is incomplete; you can help by expanding it.

References

  1. 1 2 3 4 5 6 7 8 9 Long, S. P.; Farage, P. K.; Garcia, R. L. (1996). "Measurement of leaf and canopy photosynthetic CO2exchange in the field". Journal of Experimental Botany 47: 1629. doi:10.1093/jxb/47.11.1629.
  2. 1 2 Donahue, R. A.; Poulson, M. E.; Edwards, G. E. (1997). "A method for measuring whole plant photosynthesis in Arabidopsis thaliana". Photosynthesis Research 52 (3): 263. doi:10.1023/A:1005834327441.
  3. 1 2 3 http://xa.yimg.com/kq/groups/21666630/1095837104/name/IRGA2010.doc
  4. 1 2 Jahnke, S. (2001). "Atmospheric CO2 concentration does not directly affect leaf respiration in bean or poplar". Plant, Cell and Environment 24: 1139. doi:10.1046/j.0016-8025.2001.00776.x.
  5. 1 2 3 "Field Photosynthesis Measurement Systems". New Mexico State University.
  6. 1 2 3 4 Williams, B. A.; Gurner, P. J.; Austin, R. B. (1982). "A new infra-red gas analyser and portable photosynthesis meter". Photosynthesis Research 3: 141. doi:10.1007/BF00040712.
  7. Rizhsky, L.; Liang, H.; Shuman, J.; Shulaev, V.; Davletova, S.; Mittler, R. (2004). "When Defense Pathways Collide. The Response of Arabidopsis to a Combination of Drought and Heat Stress". Plant Physiology 134 (4): 1683–96. doi:10.1104/pp.103.033431. PMC 419842. PMID 15047901.
  8. Abdul-Hamid, H.; Mencuccini, M. (2008). "Age- and size-related changes in physiological characteristics and chemical composition of Acer pseudoplatanus and Fraxinus excelsior trees". Tree Physiology 29 (1): 27–38. doi:10.1093/treephys/tpn001. PMID 19203930.
  9. Burgess, S. S. O.; Dawson, T. E. (2004). "The contribution of fog to the water relations of Sequoia sempervirens (D. Don): foliar uptake and prevention of dehydration". Plant, Cell and Environment 27: 1023. doi:10.1111/j.1365-3040.2004.01207.x.
  10. Ashish Kumar Chaturvedi *, Rajiv Kumar Vashistha, Neelam Rawat, Pratti Prasad and Mohan Chandra Nautiyal (2009). "Effect of CO2 Enrichment on Photosynthetic Behavior of Podophyllum hexandrum Royle, an Endangered Medicinal Herb." (PDF). Journal of American Science 5 (5): 113–118. Retrieved 2011-02-22.
  11. Moutinho-Pereira, J. M.; Bacelar, E. A.; Gonçalves, B.; Ferreira, H. F.; Coutinho, J. O. F.; Correia, C. M. (2009). "Effects of Open-Top Chambers on physiological and yield attributes of field grown grapevines". Acta Physiologiae Plantarum 32: 395. doi:10.1007/s11738-009-0417-x.
  12. Velikova, V.; Tsonev, T.; Loreto, F.; Centritto, M. (2010). "Changes in photosynthesis, mesophyll conductance to CO2, and isoprenoid emissions in Populus nigra plants exposed to excess nickel". Environmental Pollution 159 (5): 1058–1066. doi:10.1016/j.envpol.2010.10.032. PMID 21126813.
  13. Wang, Z.; Zhang, Y.; Huang, Z.; Huang, L. (2008). "Antioxidative response of metal-accumulator and non-accumulator plants under cadmium stress". Plant and Soil 310: 137. doi:10.1007/s11104-008-9641-1.
  14. Hu, H.; Dai, M.; Yao, J.; Xiao, B.; Li, X.; Zhang, Q.; Xiong, L. (2006). "Overexpressing a NAM, ATAF, and CUC (NAC) transcription factor enhances drought resistance and salt tolerance in rice". Proceedings of the National Academy of Sciences 103: 12987. Bibcode:2006PNAS..10312987H. doi:10.1073/pnas.0604882103.
  15. Silim, S.; Nash, R.; Reynard, D.; White, B.; Schroeder, W. (2009). "Leaf gas exchange and water potential responses to drought in nine poplar (Populus spp.) clones with contrasting drought tolerance". Trees 23 (5): 959. doi:10.1007/s00468-009-0338-8.
  16. Singh, R. P.; Agrawal, M. (2010). "Biochemical and Physiological Responses of Rice (Oryza sativa L.) Grown on Different Sewage Sludge Amendments Rates". Bulletin of Environmental Contamination and Toxicology 84 (5): 606–12. doi:10.1007/s00128-010-0007-z. PMID 20414639.
  17. Wilkinson, M. J.; Owen, S. M.; Possell, M.; Hartwell, J.; Gould, P.; Hall, A.; Vickers, C.; Nicholas Hewitt, C. (2006). "Circadian control of isoprene emissions from oil palm (Elaeis guineensis)" (PDF). The Plant Journal 47 (6): 960–8. doi:10.1111/j.1365-313X.2006.02847.x. PMID 16899082.
  18. "Ecophysiological diversity of wild Coffea arabica populations in Ecophysiological diversity of wild Coffea arabica populations in" (PDF). Retrieved 2011-02-22.
  19. Griffiths, H.; Cousins, A. B.; Badger, M. R.; Von Caemmerer, S. (2006). "Discrimination in the Dark. Resolving the Interplay between Metabolic and Physical Constraints to Phosphoenolpyruvate Carboxylase Activity during the Crassulacean Acid Metabolism Cycle". Plant Physiology 143 (2): 1055–67. doi:10.1104/pp.106.088302. PMC 1803711. PMID 17142488.

External links

This article is issued from Wikipedia - version of the Wednesday, December 16, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.