Alstom PL42AC

PL42AC

NJTR PL42AC #4030 near Port Jervis station.
Type and origin
Power type Diesel-electric
Builder Alstom, EMD
Model PL42AC
Build date November 2003 – 2006
Specifications
UIC class Bo'Bo'
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Wheel diameter 42 in (1,100 mm)
Length 69 ft 10 in (21.29 m)
Width 10 ft 8 in (3.25 m)
Height 15 ft 5 in (4.70 m)
Loco weight 144 short tons (131,000 kg)[1] (287000lb[2])
Fuel capacity 2,250 US gal (8,500 l)
Prime mover EMD EMD 16-710G3B-T1, V16
Engine type 2 stroke diesel
Alternator TA-17
Head end power 800 kW (1,100 hp)
Performance figures
Maximum speed 160 km/h (99 mph)[2]
Power output At Alternator:4,200 hp (3.1 MW)
At Rail: 3,620 hp (2.70 MW) MAX with HEP on
Tractive effort starting: 69,975 lbf (311.26 kN)
continuous: 27,000 lbf (120 kN)
Career
Operators NJ Transit
Numbers 4000 – 4032[3]
Sources:[1][4] except where noted

The Alstom PL42AC is a class of four axle Bo-Bo diesel-electric locomotive designed by Alstom in association with GM-EMD between 2003 and 2006 for New Jersey Transit, USA.

Description

The PL42AC is a diesel-electric 4-axle locomotive built at by Alstom with GM-EMD 710 engines for New Jersey Transit. The first 33 locomotives were manufactured at the Meinfesa plant in Valencia, Spain in 2003.[5] Later units were assembled at the Alstom Transport plant in Hornell, New York in 2004[6] and were produced through early 2006. The power rating of the PL42AC locomotives is 4200 hp (3.1 MW) total for tractive effort and head-end power.

This locomotive uses IGBT technology with precise traction computers for tractive effort. The PL42 has 800 kilowatts head-end power and WABCO's EPIC II braking system, along with an E-7 wheel slide device, made by Wabtec, preventing flats spots on the wheels through software and hardware.

It has an Intelligent Display Unit (IDU) based on Bombardier Transportation technology from which an engineer or technician can view data or download events and faults from the previous weeks or months. The technician can do a host of tests from the IDU to determine if a specific system is operating correctly.

The PL42AC uses computer hardware and software to control functions and to protect the engine. For example, if the on-board computer detects too little oil in the system, it will shut down the engine to avoid damage.

References

  1. 1 2 Vantuono, William C. (August 2002), "When form follows function - industrial design (p.2 of 3)", Railway Age
  2. 1 2 "Mainline Diesel-Electric Locomotives : PL42 AC" (PDF), www.vossloh-espana.com
  3. ↑ http://i.ebayimg.com/t/New-Jersey-Transit-PL42-AC-Locomotive-Operating-Instruction-Manual-/00/s/MTIwMFgxNjAw/z/gWUAAOxyRhBSujr4/$_12.JPG?rt=nc
  4. ↑ "New locomotives for NJT", THE TRANSFER TABLE The Wilmington Chapter NRHS Official Newsletter Internet Edition 24 (7), Sep 2002
  5. ↑ "Vossloh España Product References". Retrieved 2009-03-23.
  6. ↑ "After nearly four years of development, design, and construction, New Jersey Transit's 33 PL42AC diesel-electric locomotives have been completed and are expected to begin testing and certification on NJT lines soon", Railway Age, 1 April 2005

External links

This article is issued from Wikipedia - version of the Wednesday, January 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.