One-hot

Binary Gray code One-hot
000 000 00000001
001 001 00000010
010 011 00000100
011 010 00001000
100 110 00010000
101 111 00100000
110 101 01000000
111 100 10000000

In digital circuits, one-hot refers to a group of bits among which the legal combinations of values are only those with a single high (1) bit and all the others low (0).[1] A similar implementation in which all bits are '1' except one '0' is sometimes called one-cold.

Applications

One-hot encoding is often used for indicating the state of a state machine. When using binary or Gray code, a decoder is needed to determine the state. A one-hot state machine, however, does not need a decoder as the state machine is in the nth state if and only if the nth bit is high.

A ring counter with fifteen sequentially-ordered states is an example of a state machine. A 'one-hot' implementation would have fifteen flip flops chained in series with the Q output of each flip flop connected to the D input of the next and the D input of the first flip flop connected to the Q output of the fifteenth flip flop. The first flip flop in the chain represents the first state, the second represents the second state, and so on to the fifteenth flip flop which represents the last state. Upon reset of the state machine all of the flip flops are reset to '0' except the first in the chain which is set to '1'. The next clock edge arriving at the flip flops advances the one 'hot' bit to the second flip flop. The 'hot' bit advances in this way until the fifteenth state after which the state machine returns to the first state.

An address decoder converts from binary or gray code to one-hot representation. A priority encoder converts from one-hot representation to binary or gray code.

In Natural Language Processing a one-hot vector is a 1xN matrix (vector) used to distinguish each word in a vocabulary from every other word in the vocabulary. The vector consists of 0s in all cells with the exception of a single 1 in a cell used uniquely to identify the word.

Differences from other encoding methods

Advantages

Using a one-hot implementation typically allows a state machine to run at a faster clock rate than any other encoding of that state machine.[2]

Disadvantages

See also

References

  1. Harris, David and Harris, Sarah. Digital design and computer architecture (2nd ed.). San Francisco, Calif.: Morgan Kaufmann. p. 129. ISBN 978-0-12-394424-5.
  2. Xilinx. "HDL Synthesis for FPGAs Design Guide". section 3.13: "Encoding State Machines". Appendix A: "Accelerate FPGA Macros with One-Hot Approach". 1995.


This article is issued from Wikipedia - version of the Sunday, February 07, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.