Olivine

For other uses, see Olivine (disambiguation).
Olivine
General
Category Nesosilicate
Olivine group
Olivine series
Formula
(repeating unit)
(Mg, Fe)2SiO4
Identification
Color Yellow to yellow-green
Crystal habit Massive to granular
Crystal system Orthorhombic
Cleavage Poor
Fracture Conchoidal – brittle
Mohs scale hardness 6.5–7
Luster Vitreous
Streak None
Diaphaneity Transparent to translucent
Specific gravity 3.2–4.5[1][2][3][4]
Optical properties Biaxial (+)
Refractive index nα = 1.630–1.650
nβ = 1.650–1.670
nγ = 1.670–1.690
Birefringence δ = 0.040
References [5][6][7]

The mineral olivine is a magnesium iron silicate with the formula (Mg+2, Fe+2)2SiO4. Thus it is a type of nesosilicate or orthosilicate. It is a common mineral in the Earth's subsurface but weathers quickly on the surface.

The ratio of magnesium and iron varies between the two endmembers of the solid solution series: forsterite (Mg-endmember: Mg2SiO4) and fayalite (Fe-endmember: Fe2SiO4). Compositions of olivine are commonly expressed as molar percentages of forsterite (Fo) and fayalite (Fa) (e.g., Fo70Fa30). Forsterite has an unusually high melting temperature at atmospheric pressure, almost 1,900 °C (3,450 °F), but the melting temperature of fayalite is much lower (about 1,200 °C [2,190 °F]). The melting temperature varies smoothly between the two endmembers, as do other properties. Olivine incorporates only minor amounts of elements other than oxygen, silicon, magnesium and iron. Manganese and nickel commonly are the additional elements present in highest concentrations.

Olivine gives its name to the group of minerals with a related structure (the olivine group) which includes tephroite (Mn2SiO4), monticellite (CaMgSiO4) and kirschsteinite (CaFeSiO4).

Olivine's crystal structure incorporates aspects of the orthorhombic P Bravais lattice, which arise from each silica (SiO4) unit being joined by metal divalent cations with each oxygen in SiO4 bound to 3 metal ions. It has a spinel-like structure similar to magnetite but uses one quadravalent and two divalent cations M2+2 M+4O4 instead of two trivalent and one divalent cations.[8]

Olivine gemstones are called peridot and chrysolite.

Identification and paragenesis

The green sand of Papakolea Beach, Hawaii is actually olivine crystals that have been eroded from lava rocks.
Closer view of olivine grains in Papakolea Beach sand.
Peridotite xenoliths in basalt—olivines are light green crystals. Location: San Carlos Indian Reservation, Gila Co., Arizona, US.
Lunar olivine basalt collected by Apollo 15.

Olivine is named for its typically olive-green color (thought to be a result of traces of nickel), though it may alter to a reddish color from the oxidation of iron.

Translucent olivine is sometimes used as a gemstone called peridot (péridot, the French word for olivine). It is also called chrysolite (or chrysolithe, from the Greek words for gold and stone). Some of the finest gem-quality olivine has been obtained from a body of mantle rocks on Zabargad island in the Red Sea.

Olivine occurs in both mafic and ultramafic igneous rocks and as a primary mineral in certain metamorphic rocks. Mg-rich olivine crystallizes from magma that is rich in magnesium and low in silica. That magma crystallizes to mafic rocks such as gabbro and basalt. Ultramafic rocks such as peridotite and dunite can be residues left after extraction of magmas, and typically they are more enriched in olivine after extraction of partial melts. Olivine and high pressure structural variants constitute over 50% of the Earth's upper mantle, and olivine is one of the Earth's most common minerals by volume. The metamorphism of impure dolomite or other sedimentary rocks with high magnesium and low silica content also produces Mg-rich olivine, or forsterite.

Fe-rich olivine is relatively much less common, but it occurs in igneous rocks in small amounts in rare granites and rhyolites, and extremely Fe-rich olivine can exist stably with quartz and tridymite. In contrast, Mg-rich olivine does not occur stably with silica minerals, as it would react with them to form orthopyroxene ((Mg,Fe)2Si2O6).

Mg-rich olivine is stable to pressures equivalent to a depth of about 410 km (250 mi) within Earth. Because it is thought to be the most abundant mineral in Earth’s mantle at shallower depths, the properties of olivine have a dominant influence upon the rheology of that part of Earth and hence upon the solid flow that drives plate tectonics. Experiments have documented that olivine at high pressures (e.g. 12 GPa, the pressure at depths of about 360 km (220 mi)) can contain at least as much as about 8900 parts per million (weight) of water, and that such water contents drastically reduce the resistance of olivine to solid flow; moreover, because olivine is so abundant, more water may be dissolved in olivine of the mantle than contained in Earth's oceans.[9]

First X-ray view of Martian soil - feldspar, pyroxenes, olivine revealed (Curiosity rover at "Rocknest", October 17, 2012).[10]

Extraterrestrial occurrences

Mg-rich olivine has also been discovered in meteorites,[11] the Moon, Mars,[12][13] falling into infant stars,[14] as well as on asteroid 25143 Itokawa.[15] Such meteorites include chondrites, collections of debris from the early Solar System; and pallasites, mixes of iron-nickel and olivine.

The spectral signature of olivine has been seen in the dust disks around young stars. The tails of comets (which formed from the dust disk around the young Sun) often have the spectral signature of olivine, and the presence of olivine has recently been verified in samples of a comet from the Stardust spacecraft.[16] Comet-like (magnesium-rich) olivine has also been detected in the planetesimal belt around the star Beta Pictoris.[17]

Crystal structure

Figure 1: The atomic scale structure of olivine looking along the a axis. Oxygen is shown in red, silicon in pink, and magnesium/iron in blue. A projection of the unit cell is shown by the black rectangle.

Minerals in the olivine group crystallize in the orthorhombic system (space group Pbnm) with isolated silicate tetrahedra, meaning that olivine is a nesosilicate. In an alternative view, the atomic structure can be described as a hexagonal, close-packed array of oxygen ions with half of the octahedral sites occupied with magnesium or iron ions and one-eighth of the tetrahedral sites occupied by silicon ions.

There are three distinct oxygen sites (marked O1, O2 and O3 in figure 1), two distinct metal sites (M1 and M2) and only one distinct silicon site. O1, O2, M2 and Si all lie on mirror planes, while M1 exists on an inversion center. O3 lies in a general position.

High pressure polymorphs

At the high temperatures and pressures found at depth within the Earth the olivine structure is no longer stable. Below depths of about 410 km (250 mi) olivine undergoes an exothermic phase transition to the sorosilicate, wadsleyite and, at about 520 km (320 mi) depth, wadsleyite transforms exothermically into ringwoodite, which has the spinel structure. At a depth of about 660 km (410 mi), ringwoodite decomposes into silicate perovskite ((Mg,Fe)SiO3) and ferropericlase ((Mg,Fe)O) in an endothermic reaction. These phase transitions lead to a discontinuous increase in the density of the Earth's mantle that can be observed by seismic methods. They are also thought to influence the dynamics of mantle convection in that the exothermic transitions reinforce flow across the phase boundary, whereas the endothermic reaction hampers it.[18]

The pressure at which these phase transitions occur depends on temperature and iron content.[19] At 800 °C (1,070 K; 1,470 °F), the pure magnesium end member, forsterite, transforms to wadsleyite at 11.8 gigapascals (116,000 atm) and to ringwoodite at pressures above 14 GPa (138,000 atm). Increasing the iron content decreases the pressure of the phase transition and narrows the wadsleyite stability field. At about 0.8 mole fraction fayalite, olivine transforms directly to ringwoodite over the pressure range 10.0 to 11.5 GPa (99,000–113,000 atm). Fayalite transforms to Fe
2
SiO
4
spinel at pressures below 5 GPa (49,000 atm). Increasing the temperature increases the pressure of these phase transitions.

Weathering

Olivine weathering to iddingsite within a mantle xenolith

Olivine is one of the weaker common minerals on the surface according to the Goldich dissolution series. It weathers to iddingsite (a combination of clay minerals, iron oxides and ferrihydrites) readily in the presence of water.[20] The presence of iddingsite on Mars would suggest that liquid water once existed there, and might enable scientists to determine when there was last liquid water on the planet.[21]

Uses

A worldwide search is on for cheap processes to sequester CO2 by mineral reactions, called enhanced weathering. Removal by reactions with olivine is an attractive option, because it is widely available and reacts easily with the (acid) CO2 from the atmosphere. When olivine is crushed, it weathers completely within a few years, depending on the grain size. All the CO2 that is produced by burning 1 liter of oil can be sequestered by less than 1 liter of olivine. The reaction is exothermic but slow. To recover the heat produced by the reaction to produce electricity, a large volume of olivine must be thermally well-isolated. The end-products of the reaction are silicon dioxide, magnesium carbonate and small amounts of iron oxide.[22][23]

The aluminium foundry industry uses olivine sand to cast objects in aluminium. Olivine sand requires less water than silica sands while still holding the mold together during handling and pouring of the metal. Less water means less gas (steam) to vent from the mold as metal is poured into the mold.[24]

In Finland, olivine is marketed as an ideal rock for sauna stoves because of its comparatively high density and resistance to weathering under repeated heating and cooling. Olivine is also used to tap blast furnaces in the steel industry, acting as a plug, removed in each steel run.

See also

Wikimedia Commons has media related to Olivine.

References

  1. Mick R. Smith (1999). Stone: Building Stone, Rock Fill and Armourstone in Construction. Geological Society of London. pp. 62–. ISBN 978-1-86239-029-4. Specific Gravity 3.5-4.5
  2. Jessica Elzea Kogel (2006). Industrial Minerals & Rocks: Commodities, Markets, and Uses. SME. pp. 679–. ISBN 978-0-87335-233-8. The specific gravity is approximately 3.2 when pure rises with increasing iron content.
  3. "Olivine". Science.smith.edu. Retrieved 2013-11-14. G = 3.22 to 4.39. Specific gravity increases and hardness decreases with increasing Fe.
  4. "University of Minnesota’s Mineral Pages: Olivine". Geo.umn.edu. Retrieved 2013-11-14. Specific Gravity: 3.2 (Mg-rich variety) to 4.3 (Iron-rich variety) (average weight)
  5. Olivine. Webmineral.com Retrieved on 2012-06-16.
  6. Olivine. Mindat.org Retrieved on 2012-06-16.
  7. Klein, Cornelis; C. S. Hurlburt (1985). Manual of Mineralogy (21st ed.). New York: John Wiley & Sons. ISBN 0-471-80580-7.
  8. Ernst, W. G. Earth Materials. Englewood Cliffs, NJ: Prentice-Hall, 1969. Print. p.65
  9. Smyth, J. R.; Frost, D. J.; Nestola, F.; Holl, C. M.; Bromiley, G. (2006). "Olivine hydration in the deep upper mantle: Effects of temperature and silica activity". Geophysical Research Letters 33 (15). Bibcode:2006GeoRL..3315301S. doi:10.1029/2006GL026194.
  10. Brown, Dwayne (October 30, 2012). "NASA Rover's First Soil Studies Help Fingerprint Martian Minerals". NASA. Retrieved October 31, 2012.
  11. Fukang and other Pallasites. Farlang.com (2008-04-30). Retrieved on 2012-06-16.
  12. Pretty Green Mineral....Mission Update 2006... UMD Deep Impact Website, University of Maryland Ball Aerospace & Technology Corp. retrieved June 1, 2010
  13. Hoefen, T.M., et al. 2003. Discovery of Olivine in the Nili Fossae Region of Mars. Science 302, 627-630. "http://www.sciencemag.org/content/302/5645/627"
  14. Spitzer Sees Crystal Rain... NASA Website
  15. Japan says Hayabusa brought back asteroid grains... retrieved November 18, 2010
  16. Press Release 06-091. Jet Propulsion Laboratory Stardust website, retrieved May 30, 2006.
  17. De Vries, B. L.; Acke, B.; Blommaert, J. A. D. L.; Waelkens, C.; Waters, L. B. F. M.; Vandenbussche, B.; Min, M.; Olofsson, G.; Dominik, C.; Decin, L.; Barlow, M. J.; Brandeker, A.; Di Francesco, J.; Glauser, A. M.; Greaves, J.; Harvey, P. M.; Holland, W. S.; Ivison, R. J.; Liseau, R.; Pantin, E. E.; Pilbratt, G. L.; Royer, P.; Sibthorpe, B. (2012). "Comet-like mineralogy of olivine crystals in an extrasolar proto-Kuiper belt" (PDF). Nature 490 (7418): 74–76. doi:10.1038/nature11469. PMID 23038467.
  18. Christensen, U.R. (1995). "Effects of phase transitions on mantle convection". Ann. Rev. Earth Planet. Sci. 23: 65–87. Bibcode:1995AREPS..23...65C. doi:10.1146/annurev.ea.23.050195.000433.
  19. Deer, W. A.; R. A. Howie; J. Zussman (1992). An Introduction to the Rock-Forming Minerals (2nd ed.). London: Longman. ISBN 0-582-30094-0.
  20. Kuebler, K.; Wang, A.; Haskin, L. A.; Jolliff, B. L. (2003). "A Study of Olivine Alteration to Iddingsite Using Raman Spectroscopy" (PDF). Lunar and Planetary Science 34: 1953.
  21. Swindle, T. D.; Treiman, A. H.; Lindstrom, D. J.; Burkland, M. K.; Cohen, B. A.; Grier, J. A.; Li, B.; Olson, E. K. (2000). "Noble Gases in Iddingsite from the Lafayette meteorite: Evidence for Liquid water on Mars in the last few hundred million years". Meteoritics and Planetary Science 35 (1): 107–115. Bibcode:2000M&PS...35..107S. doi:10.1111/j.1945-5100.2000.tb01978.x.
  22. Goldberg, P.; Chen, Z.-Y.; O'Connor, W.; Walters, R.; Ziock, H. (2000). "CO2 Mineral Sequestration Studies in US" (PDF). Technology 1 (1): 1–10.
  23. Schuiling, R. D.; Krijgsman, P. (2006). "Enhanced Weathering: An Effective and Cheap Tool to Sequester CO2". Climatic Change 74 (1–3): 349–354. doi:10.1007/s10584-005-3485-y.
  24. Ammen, C. W. (1980). The Metal Caster's Bible. Blue Ridge Summit PA: TAB. p. 331. ISBN 0-8306-9970-8.

External links

This article is issued from Wikipedia - version of the Thursday, January 28, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.