Oceanic crust

Colors indicate the age of oceanic lithosphere, wherein red indicates the youngest age, and blue indicates the oldest age. The lines represent tectonic plates.

Oceanic crust is the uppermost layer of the oceanic portion of a tectonic plate. The crust overlies the solidified and uppermost layer of the mantle. The crust and the solid mantle layer together comprise oceanic lithosphere.

Oceanic crust is the result of erupted mantle material originating from below the plate, cooled and in most instances, modified chemically by seawater. This occurs mostly at mid-ocean ridges, but also at scattered hotspots, and also in rare but powerful occurrences known as flood basalt eruptions. It is primarily composed of mafic rocks, or sima, which is rich in iron and magnesium. It is thinner than continental crust, or sial, generally less than 10 kilometers thick; however it is denser, having a mean density of about 2.9 grams per cubic centimeter^[1] as opposed to continental crust which has a density of about 2.7 grams per cubic centimeter.^[2]

Composition

Although a complete section of oceanic crust has not yet been drilled, geologists have several pieces of evidence that help them understand the ocean floor. Estimations of composition are based on analyses of ophiolites (sections of oceanic crust that are preserved on the continents), comparisons of the seismic structure of the oceanic crust with laboratory determinations of seismic velocities in known rock types, and samples recovered from the ocean floor by submersibles, dredging (especially from ridge crests and fracture zones) and drilling. Oceanic crust is significantly simpler than continental crust and generally can be divided in three layers.

• Layer 1 is on an average 0.4 km thick. It consists of unconsolidated or semiconsolidated sediments, usually thin or even not present near the mid-ocean ridges but thickens farther away from the ridge. Near the continental margins sediment is terrigenous, meaning derived from the land, unlike deep sea sediments which are made of tiny shells of marine organisms, usually calcareous and siliceous, or it can be made of volcanic ash and terrigenous sediments transported by turbidity currents.^[3]
• Layer 2 could be divided into two parts: layer 2A – 0.5 km thick uppermost volcanic layer of glassy to finely crystalline basalt usually in the form of pillow basalt, and layer 2B – 1.5 km thick layer composed of diabase dikes.
• Layer 3 is formed by slow cooling of magma beneath the surface and consists of coarse grained gabbros and cumulate ultramafic rocks. It constitutes over two-thirds of oceanic crust volume with almost 5 km thickness.

Geochemistry

The most voluminous volcanic rocks of the ocean floor are the mid-oceanic ridge basalts, which are derived from low-potassium tholeiitic magmas. These rocks have low concentrations of large ion lithophile elements (LILE), light rare earth elements (LREE), volatile elements and other highly incompatible elements. There can be found basalts enriched with incompatible elements, but they are rare and associated with mid-ocean ridge hot spots such as surroundings of Galapagos Islands, the Azores and Iceland.^[4]

Life cycle

Oceanic crust is continuously being created at mid-ocean ridges. As plates diverge at these ridges, magma rises into the upper mantle and crust. As it moves away from the ridge, the lithosphere becomes cooler and denser, and sediment gradually builds on top of it. The youngest oceanic lithosphere is at the oceanic ridges, and it gets progressively older away from the ridges.

As the mantle rises it cools and melts, as the pressure decreases and it crosses the solidus. The amount of melt produced depends only on the temperature of the mantle as it rises. Hence most oceanic crust is the same thickness (7±1 km). Very slow spreading ridges (<1 cm·yr⁻¹ half-rate) produce thinner crust (4–5 km thick) as the mantle has a chance to cool on upwelling and so it crosses the solidus and melts at lesser depth, thereby producing less melt and thinner crust. An example of this is the Gakkel Ridge under the Arctic Ocean. Thicker than average crust is found above plumes as the mantle is hotter and hence it crosses the solidus and melts at a greater depth, creating more melt and a thicker crust. An example of this is Iceland which has crust of thickness ~20 km.^[5]

The oceanic lithosphere subducts at what are known as convergent boundaries. These boundaries can exist between oceanic lithosphere on one plate and oceanic lithosphere on another, or between oceanic lithosphere on one plate and continental lithosphere on another. In the second situation, the oceanic lithosphere always subducts because the continental lithosphere is less dense. The subduction process consumes older oceanic lithosphere, so oceanic crust is seldom more than 200 million years old.^[6] The process of super-continent formation and destruction via repeated cycles of creation and destruction of oceanic crust is known as the Wilson cycle.

The oldest large scale oceanic crust is in the west Pacific and north-west Atlantic - both are about up to 180-200 million years old. However, parts of the eastern Mediterranean Sea are remnants of the much older Tethys ocean, at about 270 million years old.^[7]

Magnetic anomalies

The oceanic crust displays an interesting pattern of parallel magnetic lines, parallel to the ocean ridges, frozen in the basalt. In the 1950s, scientists mapped the magnetic field generated by rocks on the ocean floor. They noticed a symmetrical pattern of positive and negative magnetic lines as they moved along the ocean floor, and the line of symmetry was at the mid ocean ridge. That the anomalies were symmetrical at the mid-ocean ridge was explained by the hypothesis that new rock was being formed by magma at the mid-ocean ridges, and the ocean floor was spreading out from this point. When the magma cooled to form rock, it aligned itself with the current position of the north magnetic pole of the Earth (which has reversed many times in its past) at the time of its cooling. New magma forced the older cooled magma away from the ridge. Approximately half of the new rock was formed on one side of the ridge and half on the other.

See also

• Mohorovičić discontinuity
• Plate tectonics

Notes

References

• Marshak, Stephen (2005) Earth: Portrait of a Planet (41-87)
• McDuff, Russell E.; Heath, G. Ross. "Ocean 540: Oceanic Lithosphere; Plate Tectonics; Seafloor Topography". School of Oceanography, University of Washington. Retrieved August 2009. 

Physical oceanography Waves Airy wave theory Ballantine scale Benjamin–Feir instability Boussinesq approximation Breaking wave Clapotis Cnoidal wave Cross sea Dispersion Edge wave Equatorial waves Fetch Gravity wave Infragravity wave Internal wave Kelvin wave Kinematic wave Longshore drift Luke's variational principle Mild-slope equation Radiation stress Rogue wave Rossby wave Rossby-gravity waves Sea state Seiche Significant wave height Sneaker wave Soliton Stokes boundary layer Stokes drift Stokes wave Swell Trochoidal wave Tsunami megatsunami Undertow Ursell number Wave action Wave base Wave height Wave power Wave radar Wave setup Wave shoaling Wave turbulence Wave–current interaction Waves and shallow water one-dimensional Saint-Venant equation shallow water equations Wind wave model Circulation Atmospheric circulation Baroclinity Boundary current Coriolis effect Downwelling Eddy Ekman layer Ekman spiral Ekman transport El Niño Southern Oscillation General Circulation Model Geostrophic current Global Ocean Data Analysis Project Gulf Stream Halothermal circulation Humboldt Current Hydrothermal circulation Langmuir circulation Longshore drift Loop Current Maelstrom Modular ocean model Ocean dynamics Ocean gyre Princeton ocean model Rip current Subsurface currents Sverdrup balance Thermohaline circulation shutdown Upwelling Whirlpool World Ocean Circulation Experiment Tides Amphidromic point Earth tide Head of tide Internal tide Lunitidal interval Perigean spring tide Rip tide Rule of twelfths Slack water Tidal bore Tidal force Tidal power Tidal race Tidal range Tidal resonance Tide gauge Tideline Landforms Abyssal fan Abyssal plain Atoll Bathymetric chart Coastal geography Cold seep Continental margin Continental rise Continental shelf Contourite Guyot Hydrography Oceanic basin Oceanic plateau Oceanic trench Passive margin Seabed Seamount Submarine canyon Plate tectonics Convergent boundary Divergent boundary Fracture zone Hydrothermal vent Marine geology Mid-ocean ridge Mohorovičić discontinuity Vine–Matthews–Morley hypothesis Oceanic crust Outer trench swell Ridge push Seafloor spreading Slab pull Slab suction Slab window Subduction Transform fault Volcanic arc Ocean zones Benthic Deep ocean water Deep sea Littoral Mesopelagic Oceanic Pelagic Photic Surf Sea level Deep-ocean Assessment and Reporting of Tsunamis Future sea level Global Sea Level Observing System North West Shelf Operational Oceanographic System Ocean Surface Topography Mission Sea-level curve Sea level rise World Geodetic System Acoustics Deep scattering layer Hydroacoustics Ocean acoustic tomography Sofar bomb SOFAR channel Underwater acoustics Related Argo Benthic lander Color of water DSV Alvin Marginal sea Marine energy Marine pollution Mooring National Oceanographic Data Center Ocean Ocean exploration Ocean observations Ocean reanalysis Ocean surface topography Ocean thermal energy conversion Oceanography Pelagic sediment Sea surface microlayer Sea surface temperature Seawater Science On a Sphere Thermocline Underwater glider Water column World Ocean Atlas Category Commons