Oak wilt

Oak wilt
Aerial photograph of an oak wilt center (St. Paul, MN). Robert L. Anderson, USDA Forest Service, Bugwood.org
Causal agents	Ceratocystis fagacearum
Hosts	oaks
Symptoms	leaf discoloration, wilt, defoliation and death

Oak wilt is a fungal disease that can quickly kill an oak tree. It is caused by the fungus Ceratocystis fagacearum. Symptoms vary by tree species but generally consist of leaf discoloration, wilt, defoliation, and death. The fungus is spread from diseased to healthy trees by insect vectors or via connections between tree roots. Management of the disease consists mainly of preventing infection by avoiding tree wounds, removing diseased trees and digging trenches that disrupt root connections. Fungicide treatments are available and are mostly preventive as well. Oak wilt is an important disease of oak for timber production and of oak trees in urban areas.

Hosts and symptoms

Photograph of leaf and whole tree symptoms of oak wilt in a red oak tree. Joseph O'Brien, USDA Forest Service, Bugwood.org

Oak wilt affects all oak species, but affects the two main groups differently. Oaks in North and Central America are sorted into two groups based mostly upon cell structure and corresponding leaf shape. The white oak group are diffuse-porous hardwoods and have rounded leaf edges. The red oak group are ring-porous hardwoods and have pointed leaf edges. Ring porous (red oak group) oaks die faster - from oak wilt disease - than diffuse porous oaks. Common names of oaks are based upon common folklore or customs, which leads-to black oaks being in the red oak group. In the upper midwest, red oak group trees like black, northern red and northern pin are most threatened-by oak wilt for two reasons: they die faster and they produce spore mats. White oak group trees rarely produce spore mats, so overland spread of oak wilt from white oaks is not a problem. Oaks in the red oak group (pointed leaf edges) are particularly susceptible and, when infected, generally die over the course of a single summer. These oaks typically die from the top of the tree down as leaves become a bronze color and fall off the tree. Another symptom is discoloration of the vascular tissues. Brown streaks or spots can be seen under the bark in the sapwood.

Oaks in the white oak group (white, swamp white, bur and others with rounded leaf edges) are somewhat less susceptible when infected (white oak in particular) and can live for several years after infection, losing a few branches each season, from the top down. Some oaks in the white oak group, such as bur oak, are more susceptible than others, although not as susceptible as red oaks. Symptoms in white oak are similar to those in red oak.

Oaks with oak wilt stand out with their dead crowns compared to a green canopy in the summer, so much so that oak wilt infections can be spotted from the air.

Northern pin oak (Q. ellipsoidalis) susceptibility is extreme when monocultures exist. Northern pin oak forests are typically found on entisol soils (aka barren sands or lakebed sands) in Wisconsin and Minnesota, and these forests are often misidentified as oak savanna. Mistaking northern pin oak forest monocultures for oak savanna, then burning them for oak savanna restoration, has made state and federal lands north of Minneapolis-St Paul the largest oak wilt disease reservoirs in Minnesota.^[1] See: https://commons.wikimedia.org/wiki/File:Cedar_Creek_2007_Oak_With_County_Line_Wiki_Version.jpg

Live oak susceptibility is somewhat variable depending on environmental conditions but wilt and death usually occur within six months of infection. Live oak foliar symptoms differ from those of red and white oak. Infected live oak leaves develop chlorotic veins that eventually turn necrotic before falling off the tree.

Disease Cycle

Illustration of the oak wilt disease cycle by Julie Martinez

Photograph of spores produced by the oak wilt fungus. (a) Endoconidia (b) Conidiophore

The oak wilt fungus spreads in two basic ways: transfer of spores from diseased to healthy trees by insect vectors and movement of the fungus from a diseased tree to a healthy tree through root grafts. If conditions are right after the oak has wilted and died, spores are produced on fungal mats that form under the bark of the tree. These mats produce asexual spores called endoconidia, which are barrel shaped spores produced in chains. If compatible mating types are present, these mats will also produce sexual spores called ascospores in fruiting structures called perithecia. Certain species of sap beetles are attracted to the fruity smell of these mats. They will visit the mats to feed and breed, thereby picking up the fungal spores. These same beetles are also attracted to the bleeding sap of wounded oak trees and can then deposit the spores picked up from the fungal mats. This method of transmission is important for introducing the fungus into a new area it could not have reached by transmission via root grafts.

Transmission via root graft is the most common means of spread, as trees within as much as 15 m (50 feet) of a diseased tree can be infected. Oak wilt usually moves from diseased trees to healthy trees through roots that have become interconnected (root grafts). In this case, spores (also endoconidia) that have been produced inside the tree travel through the vascular tissue. Most root grafts form between oaks of the same species; red oak roots graft more commonly than do white oak roots, and grafts between red and white oaks are very rare.

Environment

In the Midwest and eastern United States, conditions are usually favorable for spore production and beetle activity in spring and early summer. In Texas, mat formation is most common in late fall and winter. Frequency of root graft formation, and therefore root graft transmission, is affected by soil type and stand composition (diversity of tree species). See disease cycle and management sections for details.

Management

Oak wilt is similar to Dutch elm disease but more controllable. Beetles that carry the oak wilt fungus do not have chewing mouth parts -and need some other creature or physical damage to create open wounds - whereas beetles that carry Dutch elm disease do have chewing mouth parts. Prevention is essential, as there is no permanent cure. To prevent beetle transmission, oaks should never be pruned in the spring months in the east and Midwest or February through June in Texas. Care should be taken to prevent injury to susceptible trees during this period, particularly from construction. If a tree is injured through a storm or accident in the spring, tree paint to cover the wound is advised. Reducing the source of spores is helpful. When an oak has died from oak wilt, trees should be debarked, split or chipped then burned or covered with plastic sheeting to effect composting. Heat from composting should destroy or severely enervate the fungus. Logs from trees infected with oak wilt should never be moved to unaffected areas, even for firewood.

In the Lake States, if infection is discovered in a tree, a vibratory plow line, commonly called a trench (or better yet, two generally parallel trenches at different distances from the area of risk) may be plowed to a minimum depth of four and a half feet (56 inches) between it and other potentially susceptible species to prevent root graft disease transmission. Such plowing will sever root grafts that may transmit the disease to neighboring trees. In southern states like Texas, where heavy clay soils are prevalent, rocksaws are commonly used in lieu of vibratory plows. An infected tree should not be cut down before vibratory plowing, because that increases the risk of oak wilt migrating quickly via roots to nearby trees. Injections of propiconazole, a fungicide, can help prevent transmission as well; as many as a half dozen injections every six months may be required to protect a large red oak near infected trees. Injections every other year may also be used to treat a white oak, if it is not yet greatly affected.

After 2005, treatment goals shifted towards "passive oak wilt control" and treating to natural barriers or edges, especially when managing northern pin oaks on entisol soils. Passive control means letting the disease burn out over decades and allowing native species to take over. Treating to natural barriers means restoring to native forest or savanna species by harvesting out to where oak wilt can no longer expand via root grafts. All oaks of the species that is infected are logged out, whether they are infected or healthy. Treating to natural barriers/edges or cover type changes is by far the best method to use when controlling oak wilt on large acreages.

Importance

Oak wilt is a devastating disease, killing trees rapidly in a single season. It is an important disease in urban areas where a few oak trees in a homeowner's yard may be of great value. If one tree in the homeowners yard becomes infected it will die. Not only will the homeowner need to pay to remove the dead tree, they will also need to protect the rest of the oak trees in their yard or face the prospect that nearby trees in their yard will continue to die. Loss of trees from a property can also lead to a decrease in property value. Even if a homeowner is vigilant about pruning at the correct time, storms and construction can damage trees and introduce oak wilt into a neighborhood.

July 1, 2011 Windstorm in Minnesota and Wisconsin

In 2012 and 2013, oak wilt disease showed-up in areas of east central Minnesota and northern Wisconsin where it had never been seen before. The infections appeared to have coincided-with the July 1, 2011 mesoscale convective vortex (MCV) windstorm,^[2] which had windspeeds of over 100 mph, because foresters found that first oaks infected were 7-1-11 storm-damaged oaks. They also knew infections happened within 48 hours of storm damage. Approximately 3/4 million acres in Minnesota, possibly 10 times that area for Wisconsin and up to the Keweenaw Peninsula in Michigan, were affected by the storm. Infection Levels-Spore Loads. During summer 2012, oak wilt specialists found 10 - 20 infections per 100 acres both in Rushseba Township, Chisago County Minnesota and at St. Croix State Park^[3] in Pine County, Minnesota. Wounding & infecting at ten oaks per 100 acres, one oak per 100 acres or one oak per 200 acres, presents a serious threat to the oak resource. The manageable level of oak wilt disease is one infection per 640 acres. Sources. The 7-1-11 storm-related infections have, so far, not been traced to a local source, either within 1,500 feet or even half mile away. High infection success late in overland spread season, over thousands of acres of storm damaged oaks suggests a distant source. The windstorm could have carried oak wilt spores many miles (perhaps over 100) from sources with hundreds of acres of oak wilt. One theory explaining this infection success is, large reservoirs of oak wilt spores were picked up in the storm then deposited (via insects?) directly into the damaged oaks' large cavity, thin walled 2011 earlywood cells. Which could point upwind to the three oak wilt "reservoirs" on state and federal lands in Sherburne, Anoka, Isanti and Chisago counties of Minnesota, as sources (see Hosts and Symptoms). Rate of Spread. Before the windstorm, oak wilt could spread north at 3/4 mile per year and east or west at 1-1/2 miles per year.^[4] After the storm, infections were found in four Minnesota and at least one (Sawyer) of the three new Wisconsin counties.^[5] These 2011 infections have serious ecological/economic impacts, including loss of stumpage and real estate values, and will only get worse if summer (aerial with ground follow up) surveys aren't established as soon as possible.

In forest systems, oak wilt is an important disease of oak produced for hardwood lumber and railroad ties.

Host-Parasite Interaction

Hardwood vascular wilt diseases are characterized by blockage of the tree's water-conducting vessels by either the physical presence of the pathogen (mycelium and spores), or through the host's own response to infection. Oak trees, in response to wounding or infection often produce tyloses, balloon-like outgrowths of the vessels' cell walls that can function to wall-off pathogens and prevent infections from spreading. Red oaks appear to lack a host-response mechanism that restricts the pathogen's movement, and infection usually kills the tree by wilting the entire crown. White oaks, which produce tyloses more quickly and in greater numbers, are more resistant to the disease, though the exact mechanism for this resistance is unknown.

Origin

The causal agent, Ceratocystis fagacearum, is found only within the borders of the United States, but the origin of the pathogen is not known. Recent evidence suggests that the pathogen was introduced into the United States, possibly from Central or South America, or Mexico.^[6] The disease currently affects much of the eastern and central US, from Virginia to Minnesota to Arkansas, with pockets of infection as far southwestward as the Hill Country of central Texas. One area of infection has recently been discovered as far northeastward as Glenville, New York. It is particularly common in the Midwest.

See also

Mortality of oaks

• Japanese oak wilt - caused by Raffaelea quercivora in Japan
• Sudden oak death - caused by Phytophthora ramorum

References

1. ↑ Nelson, Steven (2011). Savanna Soils of Minnesota. Minnesota: Self. pp. 21-22,29-30. ISBN 978-0-615-50320-2.
2. ↑ NWS NOAA http://www.crh.noaa.gov/images/mpx/StormReports/01July2011.pdf
3. ↑ Minnesota DNR Forestry 2012 Forest Health Annual Report, p. 37
4. ↑ Minnesota DNR Forestry (2001).
5. ↑ Wisconsin DNR Division of Forestry, Annual Report 2012 p. 6
6. ↑ Juzwik, J.; Harrington, T.C.; MacDonald, W.L.; Appel, D.N. (2008), "The origin of Ceratocystis fagacearum, the oak wilt fungus", "Annual Review of Phytopathology",46: 13-26,

External links

• USDA Forest Service article
• USDA "How to prevent Oak Wilt"
• Oak Wilt in Minnesota