Number

For other uses, see Number (disambiguation).

A number is a mathematical object used to count, measure, and label. The original examples are the natural numbers 1, 2, 3, and so forth. A notational symbol that represents a number is called a numeral. In addition to their use in counting and measuring, numerals are often used for labels (as with telephone numbers), for ordering (as with serial numbers), and for codes (as with ISBNs). In common usage, the term number may refer to a symbol, a word, or a mathematical abstraction.

In mathematics, the notion of number has been extended over the centuries to include 0, negative numbers, rational numbers such as $\frac{1}{2}$ and $-\frac{2}{3}$ , real numbers such as $\sqrt{2}$ and $\pi$ , complex numbers, which extend the real numbers by including $\sqrt{-1}$ , and sometimes additional objects. Calculations with numbers are done with arithmetical operations, the most familiar being addition, subtraction, multiplication, division, and exponentiation. Their study or usage is called arithmetic. The same term may also refer to number theory, the study of the properties of the natural numbers.

Besides their practical uses, numbers have cultural significance throughout the world.^[1]^[2] For example, in Western society the number 13 is regarded as unlucky, and "a million" may signify "a lot."^[1] Though it is now regarded as pseudoscience, numerology, or the belief in a mystical significance of numbers, permeated ancient and medieval thought.^[3] Numerology heavily influenced the development of Greek mathematics, stimulating the investigation of many problems in number theory which are still of interest today.^[3]

During the 19th century, mathematicians began to develop many different abstractions which share certain properties of numbers and may be seen as extending the concept. Among the first were the hypercomplex numbers, which consist of various extensions or modifications of the complex number system. Today, number systems are considered important special examples of much more general categories such as rings and fields, and the application of the term "number" is a matter of convention, without fundamental significance.^[4]

Numerals

Main article: Numeral system

Numbers should be distinguished from numerals, the symbols used to represent numbers. Boyer showed that Egyptians created the first ciphered numeral system. Greeks followed by mapping their counting numbers onto Ionian and Doric alphabets. The number five can be represented by digit "5" or by the Roman numeral "Ⅴ". Notations used to represent numbers are discussed in the article numeral systems. An important development in the history of numerals was the development of a positional system, like modern decimals, which have many advantages, such as representing large numbers with only a few symbols.The Roman numerals require extra symbols for larger numbers.

Main classification

"Number system" redirects here. For systems for expressing numbers, see Numeral system.

Main number systems
$\mathbb{N}$	Natural	0, 1, 2, 3, 4, ... or 1, 2, 3, 4, ...
$\mathbb{Z}$	Integer	..., −5, −4, −3, −2, −1, 0, 1, 2, 3, 4, 5, ...
$\mathbb{Q}$	Rational	a/b where a and b are integers and b is not 0
$\mathbb{R}$	Real	The limit of a convergent sequence of rational numbers
$\mathbb{C}$	Complex	a + bi where a and b are real numbers and i is the square root of −1

Natural numbers

Main article: Natural number

The natural numbers, starting with 1

The most familiar numbers are the natural numbers or counting numbers: 1, 2, 3, and so on. Traditionally, the sequence of natural numbers started with 1 (0 was not even considered a number for the Ancient Greeks.) However, in the 19th century, set theorists and other mathematicians started including 0 (cardinality of the empty set, i.e. 0 elements, where 0 is thus the smallest cardinal number) in the set of natural numbers.^[5]^[6] Today, different mathematicians use the term to describe both sets, including 0 or not. The mathematical symbol for the set of all natural numbers is N, also written $\mathbb{N}$ , and sometimes $\mathbb{N}_0$ or $\mathbb{N}_1$ when it is necessary to indicate whether the set should start with 0 or 1, respectively.

In the base 10 numeral system, in almost universal use today for mathematical operations, the symbols for natural numbers are written using ten digits: 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9. In this base 10 system, the rightmost digit of a natural number has a place value of 1, and every other digit has a place value ten times that of the place value of the digit to its right.

In set theory, which is capable of acting as an axiomatic foundation for modern mathematics,^[7] natural numbers can be represented by classes of equivalent sets. For instance, the number 3 can be represented as the class of all sets that have exactly three elements. Alternatively, in Peano Arithmetic, the number 3 is represented as sss0, where s is the "successor" function (i.e., 3 is the third successor of 0). Many different representations are possible; all that is needed to formally represent 3 is to inscribe a certain symbol or pattern of symbols three times.

Integers

Main article: Integer

The negative of a positive integer is defined as a number that produces 0 when it is added to the corresponding positive integer. Negative numbers are usually written with a negative sign (a minus sign). As an example, the negative of 7 is written −7, and 7 + (−7) = 0. When the set of negative numbers is combined with the set of natural numbers (including 0), the result is defined as the set of integers, Z also written $\mathbb{Z}$ . Here the letter Z comes from German Zahl, meaning "number". The set of integers forms a ring with the operations addition and multiplication.^[8]

The natural numbers form a subset of the integers. As there is no common standard for the inclusion or not of zero in the natural numbers, the natural numbers without zero are commonly referred to as positive integers, and the natural numbers with zero are referred to as non-negative integers.

Rational numbers

Main article: Rational number

A rational number is a number that can be expressed as a fraction with an integer numerator and a positive integer denominator. Negative denominators are allowed, but are commonly avoided, as every rational number is equal to a fraction with positive denominator. Fractions are written as two integers, the numerator and the denominator, with a dividing bar between them. The fraction m/n represents m parts of a whole divided into n equal parts. Two different fractions may correspond to the same rational number; for example 1/2 and 2/4 are equal, that is:

{1 \over 2} = {2 \over 4}.\,

If the absolute value of m is greater than n (supposed to be positive), then the absolute value of the fraction is greater than 1. Fractions can be greater than, less than, or equal to 1 and can also be positive, negative, or 0. The set of all rational numbers includes the integers, since every integer can be written as a fraction with denominator 1. For example −7 can be written −7/1. The symbol for the rational numbers is Q (for quotient), also written $\mathbb{Q}$ .

Real numbers

Main article: Real number

The real numbers include all the measuring numbers. The symbol for the real numbers is R, also written as $\mathbb{R}$ . Real numbers are usually represented by using decimal numerals, in which a decimal point is placed to the right of the digit with place value 1. Each digit to the right of the decimal point has a place value one-tenth of the place value of the digit to its left. For example, 123.456 represents 123456/1000, or, in words, one hundred, two tens, three ones, four tenths, five hundredths, and six thousandths. A finite decimal representation allows us to represent exactly only the integers and those rational numbers whose denominators have only prime factors which are factors of ten. Thus one half is 0.5, one fifth is 0.2, one tenth is 0.1, and one fiftieth is 0.02. To represent the rest of the real numbers requires an infinite sequence of digits after the decimal point. Since it impossible to write infinitely many digits, real numbers are commonly represented by rounding or truncating this sequence, or by establishing a pattern, such as 0.333..., with an ellipsis to indicate that the pattern continues. Thus 123.456 is an approximation of any real number between 1234555/10000 and 1234565/10000 (rounding) or any real number between 123456/1000 and 123457/1000 (truncation). Negative real numbers are written with a preceding minus sign: -123.456.

Every rational number is also a real number. It is not the case, however, that every real number is rational. A real number, which is not rational, is called irrational. A decimal represents a rational number if and only if has a finite number of digits or eventually repeats for ever, after any initial finite string digits. For example, 1/2 = 0.5 and 1/3 = 0.333... (forever repeating 3s, otherwise written 0.3). On the other hand, the real number $π$ , the ratio of the circumference of any circle to its diameter, is

\pi = 3.14159265358979\dots

Since the decimal neither ends nor eventually repeats forever (see: proof that pi is irrational) it cannot be written as a fraction, and is an example of an irrational number. Other irrational numbers include

\sqrt{2} = 1.41421356237 \dots\,

(the square root of 2, that is, the positive number whose square is 2).

Just as the same fraction can be written in more than one way, the same decimal may have more than one representation. 1.0 and 0.999... are two different decimal numerals representing the natural number 1. There are infinitely many other ways of representing the number 1, for example 1.00, 1.000, and so on.

Every real number is either rational or irrational. Every real number corresponds to a point on the number line. The real numbers also have an important but highly technical property called the least upper bound property.

When a real number represents a measurement, there is always a margin of error. This is often indicated by rounding or truncating a decimal, so that digits that suggest a greater accuracy than the measurement itself are removed. The remaining digits are called significant digits. For example, measurements with a ruler can seldom be made without a margin of error of at least 0.001 meters. If the sides of a rectangle are measured as 1.23 meters and 4.56 meters, then multiplication gives an area for the rectangle of 5.6088 square meters. Since only the first two digits after the decimal place are significant, this is usually rounded to 5.61.

In abstract algebra, it can be shown that any complete ordered field is isomorphic to the real numbers. The real numbers are not, however, an algebraically closed field, because they do not include the square root of minus one.

Complex numbers

Main article: Complex number

Moving to a greater level of abstraction, the real numbers can be extended to the complex numbers. This set of numbers arose historically from trying to find closed formulas for the roots of cubic and quartic polynomials. This led to expressions involving the square roots of negative numbers, and eventually to the definition of a new number: a square root of −1, denoted by i, a symbol assigned by Leonhard Euler, and called the imaginary unit. The complex numbers consist of all numbers of the form

\,a + b i

where a and b are real numbers. Because of this, complex numbers correspond to points on the complex plane, a vector space of two real dimensions. In the expression a + bi, the real number a is called the real part and b is called the imaginary part. If the real part of a complex number is 0, then the number is called an imaginary number or is referred to as purely imaginary; if the imaginary part is 0, then the number is a real number. Thus the real numbers are a subset of the complex numbers. If the real and imaginary parts of a complex number are both integers, then the number is called a Gaussian integer. The symbol for the complex numbers is C or $\mathbb{C}$ .

In abstract algebra, the complex numbers are an example of an algebraically closed field, meaning that every polynomial with complex coefficients can be factored into linear factors. Like the real number system, the complex number system is a field and is complete, but unlike the real numbers, it is not ordered. That is, there is no meaning in saying that i is greater than 1, nor is there any meaning in saying that i is less than 1. In technical terms, the complex numbers lack the trichotomy property.

Each of the number systems mentioned above is a proper subset of the next number system. Symbolically, $\mathbb{N} \subset \mathbb{Z} \subset \mathbb{Q} \subset \mathbb{R} \subset \mathbb{C}$ .

Subclasses of the integers

Even and odd numbers

Main article: Even and odd numbers

An even number is an integer that is "evenly divisible" by two, that is divisible by two without remainder; an odd number is an integer that is not even. (The old-fashioned term "evenly divisible" is now almost always shortened to "divisible".) Equivalently, an odd number is that it is an integer of the form n = 2k + 1, where k is an integer, and an even number has the form n = 2k where k is an integer.

Prime numbers

Main article: Prime number

A prime number is an integer greater than 1 that is not the product of two smaller positive integers. The prime numbers have been widely studied for more than 2000 years and have led to many questions, only some of which have been answered. The study of these questions is called number theory. An example of a question that is still unanswered is whether every even number is the sum of two primes. This is called Goldbach's conjecture.

A question that has been answered is whether every integer greater than one is a product of primes in only one way, except for a rearrangement of the primes. This is called fundamental theorem of arithmetic. A proof appears in Euclid's Elements.

Other classes of integers

Many subsets of the natural numbers have been the subject of specific studies and have been named, often after the first mathematician that has studied them. Example of such sets of integers are Fibonacci numbers and perfect numbers. For more examples, see Integer sequence.

Subclasses of the complex numbers

Algebraic, irrational and transcendental numbers

Algebraic numbers are those that are a solution to a polynomial equation with integer coefficients. Complex numbers that are not rational numbers are called irrational numbers. Complex numbers which are not algebraic are called transcendental numbers. The algebraic numbers that are solutions of a monic polynomial equation with integer coefficients are called algebraic integers.

Computable numbers

Main article: Computable number

A computable number, also known as recursive number, is a real number such that there exists an algorithm which, given a positive number n as input, produces the first n digits of the computable number's decimal representation. Equivalent definitions can be given using μ-recursive functions, Turing machines or λ-calculus. The computable numbers are stable for all usual arithmetic operations, including the computation of the roots of a polynomial, and thus form a real closed field that contains the real algebraic numbers.

The computable numbers may be viewed as the real numbers that may be exactly represented in a computer: a computable number is exactly represented by its first digits and a program for computing further digits. However, the computable numbers are rarely used in practice. One reason is that there is no algorithm for testing the equality of two computable numbers. More precisely, there cannot exist any algorithm which takes any computable number as an input, and decides in every case if this number is equal to zero or not.

The set of computable numbers has the same cardinality as the natural numbers. Therefore, almost all real numbers are non-computable. However, it is very difficult to produce explicitly a real number that is not computable.

Extensions of the concept

p-adic numbers

Main article: p-adic number

The p-adic numbers may have infinitely long expansions to the left of the decimal point, in the same way that real numbers may have infinitely long expansions to the right. The number system that results depends on what base is used for the digits: any base is possible, but a prime number base provides the best mathematical properties. The set of the p-adic numbers contains the rational numbers, but is not contained in the complex numbers.

The elements of an algebraic function field over a finite field and algebraic numbers have many similar properties (see Function field analogy). Therefore, they are often regarded as numbers by number theorists. The p-adic numbers play an important role in this analogy.

Hypercomplex numbers

Main article: hypercomplex number

Some number systems that are not included in the complex numbers may be constructed from the real numbers in a way that generalize the construction of the complex numbers. They are sometimes called hypercomplex numbers. They include the quaternions H, introduced by Sir William Rowan Hamilton, in which multiplication is not commutative, and the octonions, in which multiplication is not associative.

Transfinite numbers

Main article: transfinite number

For dealing with infinite sets, the natural numbers have been generalized to the ordinal numbers and to the cardinal numbers. The former gives the ordering of the set, while the latter gives its size. For finite sets, both ordinal and cardinal numbers are identified with the natural numbers. In the infinite case, many ordinal numbers correspond to the same cardinal number.

Nonstandard numbers

Hyperreal numbers are used in non-standard analysis. The hyperreals, or nonstandard reals (usually denoted as *R), denote an ordered field that is a proper extension of the ordered field of real numbers R and satisfies the transfer principle. This principle allows true first-order statements about R to be reinterpreted as true first-order statements about *R.

Superreal and surreal numbers extend the real numbers by adding infinitesimally small numbers and infinitely large numbers, but still form fields.

A relation number is defined as the class of relations consisting of all those relations that are similar to one member of the class.^[9]

History

First use of numbers

Main articles: History of numbers and History of writing ancient numbers

Bones and other artifacts have been discovered with marks cut into them that many believe are tally marks.^[10] These tally marks may have been used for counting elapsed time, such as numbers of days, lunar cycles or keeping records of quantities, such as of animals.

A tallying system has no concept of place value (as in modern decimal notation), which limits its representation of large numbers. Nonetheless tallying systems are considered the first kind of abstract numeral system.

The first known system with place value was the Mesopotamian base 60 system (ca. 3400 BC) and the earliest known base 10 system dates to 3100 BC in Egypt.^[11]

Zero

Further information: History of zero

The number 605 in Khmer numerals, from an inscription from 683 AD. An early use of zero as a decimal figure.

The use of 0 as a number should be distinguished from its use as a placeholder numeral in place-value systems. Many ancient texts used 0. Babylonian (Modern Iraq) and Egyptian texts used it. Egyptians used the word nfr to denote zero balance in double entry accounting entries. Indian texts used a Sanskrit word Shunye or shunya to refer to the concept of void. In mathematics texts this word often refers to the number zero.^[12]

Records show that the Ancient Greeks seemed unsure about the status of 0 as a number: they asked themselves "how can 'nothing' be something?" leading to interesting philosophical and, by the Medieval period, religious arguments about the nature and existence of 0 and the vacuum. The paradoxes of Zeno of Elea depend in large part on the uncertain interpretation of 0. (The ancient Greeks even questioned whether 1 was a number.)

The late Olmec people of south-central Mexico began to use a true zero (a shell glyph) in the New World possibly by the 4th century BC but certainly by 40 BC, which became an integral part of Maya numerals and the Maya calendar. Mayan arithmetic used base 4 and base 5 written as base 20. Sanchez in 1961 reported a base 4, base 5 "finger" abacus.

By 130 AD, Ptolemy, influenced by Hipparchus and the Babylonians, was using a symbol for 0 (a small circle with a long overbar) within a sexagesimal numeral system otherwise using alphabetic Greek numerals. Because it was used alone, not as just a placeholder, this Hellenistic zero was the first documented use of a true zero in the Old World. In later Byzantine manuscripts of his Syntaxis Mathematica (Almagest), the Hellenistic zero had morphed into the Greek letter omicron (otherwise meaning 70).

Another true zero was used in tables alongside Roman numerals by 525 (first known use by Dionysius Exiguus), but as a word, nulla meaning nothing, not as a symbol. When division produced 0 as a remainder, nihil, also meaning nothing, was used. These medieval zeros were used by all future medieval computists (calculators of Easter). An isolated use of their initial, N, was used in a table of Roman numerals by Bede or a colleague about 725, a true zero symbol.

An early documented use of the zero by Brahmagupta (in the Brāhmasphuṭasiddhānta) dates to 628. He treated 0 as a number and discussed operations involving it, including division. By this time (the 7th century) the concept had clearly reached Cambodia as Khmer numerals, and documentation shows the idea later spreading to China and the Islamic world.

Negative numbers

Further information: History of negative numbers

The abstract concept of negative numbers was recognized as early as 100 BC – 50 BC in China. The Nine Chapters on the Mathematical Art contains methods for finding the areas of figures; red rods were used to denote positive coefficients, black for negative.^[13] The first reference in a Western work was in the 3rd century AD in Greece. Diophantus referred to the equation equivalent to 4x + 20 = 0 (the solution is negative) in Arithmetica, saying that the equation gave an absurd result.

During the 600s, negative numbers were in use in India to represent debts. Diophantus' previous reference was discussed more explicitly by Indian mathematician Brahmagupta, in Brāhmasphuṭasiddhānta 628, who used negative numbers to produce the general form quadratic formula that remains in use today. However, in the 12th century in India, Bhaskara gives negative roots for quadratic equations but says the negative value "is in this case not to be taken, for it is inadequate; people do not approve of negative roots."

European mathematicians, for the most part, resisted the concept of negative numbers until the 17th century, although Fibonacci allowed negative solutions in financial problems where they could be interpreted as debts (chapter 13 of Liber Abaci, 1202) and later as losses (in Flos). At the same time, the Chinese were indicating negative numbers by drawing a diagonal stroke through the right-most non-zero digit of the corresponding positive number's numeral.^[14] The first use of negative numbers in a European work was by Nicolas Chuquet during the 15th century. He used them as exponents, but referred to them as "absurd numbers".

As recently as the 18th century, it was common practice to ignore any negative results returned by equations on the assumption that they were meaningless, just as René Descartes did with negative solutions in a Cartesian coordinate system.