Calvert's Engine

In 2004

Calvert's Engine or the Newbridge Colliery Engine is a beam engine of 1845, now preserved on the campus of the University of Glamorgan, South Wales.^[1]

History

Newbridge Colliery^[2] in Gelliwion, Pontypridd was sunk in 1844.^[3] Its owner was John Calvert, a Yorkshireman, who would give his name to this engine. The winding engine was installed in 1845, in which year production began from the 55 yard No.3 Rhondda seam.

The winding engine also powered the water pump for draining the mine.^[4] Ventilation was by the bratticed split-shaft furnace method and so there was no fan engine for ventilation.^{[lower-roman 1]}

The original engine was built in 1845 by the Varteg Ironworks^[5] of Cwmavon, near Blaenavon.^{[lower-roman 2]} This was the first steam winding engine to be installed in the Rhondda valley.^[4]

The valve gear gab
The hooked rod from the right is driven by the eccentric. When engaged, it rocks the valve arbor, the square shaft, back and forth. Bellcranks behind the shaft work the valves via the vertical pullrods.

The cylinder was replaced in 1861 by Brown, Lenox and Co.^[6] of Newbridge Works, Pontypridd.^[7] This new cylinder was of 26.5 inches (670 mm) bore, 5 feet (1.5 m) stroke. Although the original bore is unknown, the stroke remained the same, as the crank was unchanged. Reversing is by slip eccentric and gab valve gear.

By 1869, ownership of the mine had passed to the Fowler Brothers. In 1880 it was owned by the Newbridge and Rhondda Coal Company. Later the Crawshay family owned it.^[8]

At the end of the colliery's working, the Inspector of Mines' list of 1896 shows 489 employed there. The colliery closed in 1897 and the shaft was abandoned.^{[lower-roman 3][8]}

The engine and winding house lay derelict. A widely known postcard of 1912 shows the hose overgrown with ivy, but the engine beam still in place.^[8][9] There is some question as to when the engine finally worked. The 1897 closure is well documented, but many sources also state that the engine was last worked in 1919.^[4] It is not clear if this is an error, in either direction, or that the engine was re-started for a time, possibly during WWI and then closed soon after.

Preservation

In 1913 a School of Mines was established for the Welsh coalfield.^[10] The school was owned and funded by the Welsh coal owners, through a levy of one tenth of a penny on each ton of coal produced by the companies involved.^[10] This South Wales and Monmouthshire School of Mines^{[lower-roman 4]} was based in Forest House, built by the Crawshay family on the site of Fforest Isaf farm at Trefforest, Pontypridd. ^[11] It served the large coal mining industry in the South Wales Valleys.

Around 1920 the engine was removed from the derelict colliery and re-erected nearby in the grounds of the School of Mines.^[12] This was a historical exhibit, more than a practical instruction. Engines of this type were thoroughly obsolete by this time. Although the last Cornish beam engines had been installed only a few years earlier,^{[lower-roman 5]} these were pumping engines, not rotative beam engines like this for winding.

The school went through several different names and statuses over the years. Most recently it was the University of Glamorgan, now part of the University of South Wales.

Surprisingly, Calvert's Engine is not listed in Crowley (1982), usually considered as one of the first standard works of modern-era steam preservation for such engines.^[13]

References

Wikimedia Commons has media related to Calvert's Engine.