New South Wales D53 class locomotive

New South Wales D53 class

Class D53 Locomotive
Type and origin
Power type Steam
Builder Clyde Engineering (160),
Eveleigh Railway Workshops (30)
Build date 1912–1917
Total produced 190
Specifications
Configuration 2-8-0
UIC class 1'Dh
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver diameter 4 ft 9 in (1.448 m)
Adhesive weight 65 t (64 long tons; 72 short tons)
Loco weight 72 t (71 long tons; 79 short tons)
Fuel type Coal
Firebox:
 • Firegrate area		 29 sq ft (2.7 m2)
Boiler pressure 160 psi (1.10 MPa)
Heating surface 1,755 sq ft (163.0 m2)
Superheater:
 • Heating area		 365 sq ft (33.9 m2)
Cylinders Two, outside
Cylinder size 22 in × 26 in (559 mm × 660 mm)
Performance figures
Tractive effort 33,557 lbf (149.3 kN)
Factor of adh 4.46
Career
Operators New South Wales Government Railways
Class TF939, D53 from 1924
Disposition 3 preserved, 187 scrapped

The D53 class was a class of 2-8-0 steam locomotives built for the New South Wales Government Railways of Australia.

History

This class of locomotive was designed by the New South Wales Government Railways as an improved version of the T class. All the coupled wheels had flanges and a certain amount of side movement was given to the middle pairs with a laterally operating knuckle joint being provided in the middle section of the coupling rods.

Clyde Engineering delivered the first locomotive in April 1912 and by November 1917, a total of 190 were in service. Most were fitted with superheaters when built and some fitted at a later date. There was a problem with the locomotives being unbalanced, causing speed restrictions to be imposed to avoid rough riding and track damage. Following further investigations, 24 of the class received balanced coupled wheels and these were permitted to operate at higher speed on mail and fruit trains.[1][2]

When introduced, most of the class were fitted with a standard bogie tender, similar as those attached to the 50 class, although some saw service with Wampu tenders. In the later period of their lives, the majority were fitted with larger turret type tenders. To enable tender first running, many had automatic couplers fitted to the front.[2]

Following the removal of the knuckle joints from the coupling rods, flanges from the second coupled and driving wheels and the fitting of boilers standard for 50 class; 53 class and 55 class, they became most useful locomotives.[2]

The 24 not fitted with superheaters were scrapped in the 1930s. The first superheated example was withdrawn in January 1957 with the fleet down to 39 by July 1969 with the last withdrawn in January 1973.[1]

The Commonwealth Railways used the design of these locomotives for their 26 strong KA class for the Trans-Australian Railway.[2]

Preservation

Three have been preserved:

Gallery

See also

References

  1. 1 2 Oberg, Leon (1984). Locomotives of Australia 1850's - 1980's. Frenchs Forest: Reed Books. pp. 107–108. ISBN 0 730100 05 7.
  2. 1 2 3 4 Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society, NSW Division. pp. 152–155. ISBN 0 909650 27 6.
  3. ↑ "Preservation and Tourist News" Railway Digest December 1995 page 47
  4. ↑ "Lachlan Valley Railway Rolling Stock". Retrieved 26 January 2016.
  5. ↑ "Museum on the Move" Roundhouse July 1976 page 16
  6. ↑ "Museum Scene" Roundhouse January 1982 page 24
  7. ↑ "Travel Scene" Roundhouse January 1991 page 19
This article is issued from Wikipedia - version of the Tuesday, January 26, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.