New South Wales C30 class locomotive

New South Wales C30 class

Class 30 locomotive on a service to Camden in 1962
Type and origin
Power type Steam
Builder Beyer, Peacock and Company (95)
Eveleigh Railway Workshops (50)
Serial number BP 4444–4478, 5034–5038, 5084–5088, 5140–5149, 5235–5244, 5971–5820
Build date 1903–1917
Total produced 145
Specifications
Configuration 4-6-4T
UIC class 2'C2'nt
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver diameter 4 ft 7 in (1.397 m)
Adhesive weight 86,000–95,000 lb (39–43 t)
Loco weight 161,000 lb (73 t)
Fuel type Coal
Firebox:
 • Firegrate area		 24 sq ft (2.2 m2)
Boiler pressure 160 psi (1.10 MPa)
Heating surface 1,450 sq ft (135 m2)
Superheater None
Cylinders Two, outside
Cylinder size 18.5 in × 24 in (470 mm × 610 mm) or 19 in × 24 in (483 mm × 610 mm)
Performance figures
Tractive effort 20,311–21,424 lbf (90.3–95.3 kN)
Factor of adh 4.22 or 4.42
Career
Operators New South Wales Government Railways
Class S636, C30 from 1924
Retired 1957 - 1973
Preserved 3013, 3046, 3085, 3112, 3137
Disposition 77 converted to C30T class, 5 preserved, 63 scrapped

The C30 class was a class of steam locomotives built by Beyer, Peacock and Company and Eveleigh Railway Workshops for the New South Wales Government Railways of Australia.[1][2][3]

These 4-6-4T wheel arrangement locomotives were specifically designed to haul Sydney's ever increasing suburban traffic, particularly over the heavy grades on the Northern, North Shore and Illawarra lines.

Service

The first batch of 35 locomotives were built Beyer, Peacock and Company entering service in 1903/04. Between 1905 and 1917 Beyer, Peacock built a further 60 engines while the New South Wales Government Railways built 50 at their Eveleigh Railway Workshops.

The electrification of the inner suburban lines resulted in a surplus of the class too valuable to scrap. Accordingly, between August 1928 and July 1933, 77 of these locomotives were converted to C30T tender 4-6-0 type locomotives by Clyde Engineering and Eveleigh Railway Workshops to replace older locomotives on country branch lines.[2]:142-5[4]

The remaining tank locomotives were mostly employed on Sydney suburban services to Cowan, Penrith and Campbelltown as well as branches to Carlingford, Richmond and Camden.[5] They were also used on suburban services in Newcastle and Wollongong.[4]

A few drifted to the country areas, working on sections where no turntable was readily available, such as Casino to Border Loop on the North Coast line, Leeton and Merriwa and shunting at yards such as Bathurst. The daily passenger trains on the extremely steep Unanderra to Moss Vale line were operated by 30 class locomotives until February 1967.[2]

Following the electrification of the country platforms at Sydney Central station, the 30 class replaced the 26 class locomotives used to shunt carriages in the yard, they being not so dangerous to water under the traction wiring.[2]

Demise and Preservation

The first was withdrawn in February 1957, by July 1965 the fleet was down to 33 and by mid-1971 down to three.[4] The last, 3085, was withdrawn on 22 February 1973.[6][7] It was the second last steam locomotive in service on the NSWGR.

Preserved C30 Class Locomotives
No.DescriptionManufacturerYearOrganisationLocationStatusRef
3013 4-6-4T passenger Beyer, Peacock and Company1903 Canberra Railway Museum Canberra stored 3013 Blog Page
3046 4-6-4T passenger Beyer, Peacock and Company1908 Dorrigo Steam Railway and Museum Dorrigo stored NSW Locomotive, Steam 3046]
3085 4-6-4T passenger Eveleigh Railway Workshops1912 Goulburn Locomotive Roundhouse Museum Goulburn static exhibit NSW Locomotive, Steam 3085
3112 4-6-4T passengerBeyer, Peacock and Company1914 privately owned Canberra stored, operational
3137 4-6-4T passengerEveleigh Railway Workshops1916 NSW Rail Transport Museum Thirlmere static exhibit NSW Locomotive, Steam 3137

Gallery

See also

References

  1. ↑ Preston, Ron G (1984). Tender into Tank. Sydney: New South Wales Rail Transport Museum. pp. 11–57. ISBN 0 909862 18 4.
  2. 1 2 3 4 Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society, NSW Division. pp. 41–45. ISBN 0 909650 27 6.
  3. ↑ New South Wales Railways 1855-1955. Published by Department of Railways
  4. 1 2 3 Oberg, Leon (1984). Locomotives of Australia 1850's - 1980's. Frenchs Forest: Reed Books. pp. 93–94. ISBN 0 730100 05 7.
  5. ↑ "Byways of Steam: Cowan to Hornsby" Roundhouse January 1985 page 14
  6. ↑ ″Steam Locomotive Data, John Forsyth, NSWPTC 1970, 1974
  7. ↑ Railway Digest March 1973
Wikimedia Commons has media related to New South Wales C30 class locomotives.
This article is issued from Wikipedia - version of the Friday, January 29, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.