Net energy metering

Net energy metering (NEM or simply net metering) is a service to an electric consumer under which electric energy generated by that electric consumer from an eligible on-site generating facility and delivered to the local distribution facilities may be used to offset electric energy provided by the electric utility to the electric consumer during the applicable billing period.[1]

Net metering policies can vary significantly by country and by state or province: if net metering is available, if and how long you can keep your banked credits, and how much the credits are worth (retail/wholesale). Most net metering laws involve monthly roll over of kWh credits, a small monthly connection fee,[2] require monthly payment of deficits (i.e. normal electric bill), and annual settlement of any residual credit. Unlike a feed-in tariff (FIT), which requires two meters, net metering uses a single, bi-directional meter and can measure current flowing in two directions.[3] Net metering can be implemented solely as an accounting procedure, and requires no special metering, or even any prior arrangement or notification.[4]

Net metering is a policy designed to foster private investment in renewable energy.

History

Net metering originated in the United States, where small wind turbines and solar panels were connected to the electrical grid, and consumers wanted to be able to use the electricity generated at a different time or date than when it was generated. Minnesota is commonly cited as passing the first net metering law, in 1983, and allowed anyone generating less than 40 kW to either roll over any kilowatt credit to the next month, or be paid for the excess. In 2000 this was amended to compensation "at the average retail utility energy rate". This is the simplest and most general interpretation of net metering, and in addition allows small producers to sell electricity at the retail rate.[5]

Utilities in Idaho adopted net metering in 1980, and in Arizona in 1981. Massachusetts adopted net metering in 1982. By 1998, 22 states or utilities therein had adopted net metering. Two California utilities initially adopted a monthly "net metering" charge, which included a "standby charge", until the PUC banned such charges.[6] In 2005, all U.S. utilities were required to offer net metering "upon request". Excess generation is not addressed. As of 2016 43 U.S. states have adopted net metering, as well as utilities in 3 of the remaining states, leaving only 4 states without any established procedures for implementing net metering.[7]

Net metering was slow to be adopted in Europe, especially in the United Kingdom, because of confusion over how to address the value added tax (VAT). Only one utility company in Great Britain offers net metering.[8]

The United Kingdom government is reluctant to introduce the net metering principle because of complications in paying and refunding the value added tax that is payable on electricity, but pilot projects are underway in some areas.

In Canada, some provinces have net metering programs.

In the Philippines, Net Metering scheme is governed by Republic Act 9513 (Renewable Energy Act of 2008) and it's implementing rules and regulation (IRR). The implementing body is the Energy Regulatory Commission (ERC) in consultation with the National Renewable Energy Board (NREB). Unfortunately, the scheme is not a true net metering scheme but in reality a net billing scheme. As the Dept of Energy's Net Metering guidelines say, "

“Net-metering allows customers of Distribution Utilities (DUs) to install an on-site Renewable Energy (RE) facility not exceeding 100 kilowatts (kW) in capacity so they can generate electricity for their own use. Any electricity generated that is not consumed by the customer is automatically exported to the DU’s distribution system. The DU then gives a peso credit for the excess electricity received equivalent to the DU’s blended generation cost, excluding other generation adjustments, and deducts the credits earned to the customer’s electric bill.” [9]

Thus Philippine consumers who generate their own electricity and sell their surplus to the utility are paid what is called the "generation cost" which is often less than 50% of the retail price of electricity.

Controversy

A report prepared by Peter Kind of Energy Infrastructure Advocates for the trade association Edison Electric Institute stated that distributed generation systems, like rooftop solar, present unique challenges to the future of electric utilities.[10]

Renewable advocates point out that while distributed solar and other energy efficiency measures do pose a challenge to electric utilities' existing business model, the benefits of distributed generation outweigh the costs, and those benefits are shared by all ratepayers.[11] Grid benefits of private distributed solar investment include reduced need for centralizing power plants and reduced strain on the utility grid. They also point out that, as a cornerstone policy enabling the growth of rooftop solar, net metering creates a host of societal benefits for all ratepayers that are generally not accounted for by the utility analysis, including: public health benefits, employment and downstream economic effects, market price impacts, grid security benefits, and water savings.[12]

An independent report conducted by the consulting firm Crossborder Energy found that the benefits of California's net metering program outweigh the costs to ratepayers. Those net benefits will amount to more than US$92 million annually upon the completion of the current net metering program.[13]

A 2012 report on the cost of net metering in the State of California, commissioned by the California Public Utilities Commission (CPUC), showed that those customers without distributed generation systems will pay US$287 in additional costs to use and maintain the grid every year by 2020. The report also showed the net cost will amount to US$1.1 billion by 2020.[14] Notably, the same report found that solar customers do pay more on their power bills than what it costs the utility to serve them (Table 5, page 10: average 103% of their cost of service across the three major utilities in 2011).[14]

Comparison

Net metering, unlike a feed-in tariff, requires only one meter, but it must be bi-directional.

There is considerable confusion between the terms "net metering" and "feed-in tariff". In general there are three types of compensation for local, distributed generation:

Net metering only requires one meter. A feed-in tariff requires two.

Time of use metering

Further information: Smart meter

Time of use (TOU) net metering employs a specialized reversible smart (electric) meter that is programmed to determine electricity usage any time during the day. Time-of-use allows utility rates and charges to be assessed based on when the electricity was used (i.e., day/night and seasonal rates). Typically the generation cost of electricity is highest during the daytime peak usage period, and lowest at night. Time of use metering is a significant issue for renewable-energy sources, since, for example, solar power systems tend to produce energy during the daytime peak-price period, and produce little or no power during the night period, when price is low. Italy has installed so many photovoltaic cells that peak prices no longer are during the day, but are instead in the evening.[15] TOU net metering affects the apparent cost of net metering to a utility.[16]

Market rate net metering

Further information: Vehicle-to-grid

In market rate net metering systems the user's energy use is priced dynamically according to some function of wholesale electric prices. The users' meters are programmed remotely to calculate the value and are read remotely. Net metering applies such variable pricing to excess power produced by a qualifying system.

Market rate metering systems were implemented in California starting in 2006, and under the terms of California's net metering rules will be applicable to qualifying photovoltaic and wind systems. Under California law the payback for surplus electricity sent to the grid must be equal to the (variable, in this case) price charged at that time.

Net metering enables small systems to result in zero annual net cost to the consumer provided that the consumer is able to shift demand loads to a lower price time, such as by chilling water at a low cost time for later use in air conditioning, or by charging a battery electric vehicle during off-peak times, while the electricity generated at peak demand time can be sent to the grid rather than used locally (see Vehicle-to-grid). No credit is given for annual surplus production.

Excess generation

Excess generation is a separate issue than net metering, but it is normally dealt with in the same rules, because it can arise. If local generation offsets a portion of the demand, net metering is not used. If local generation exceeds demand some of the time, for example during the day, net metering is used. If local generation exceeds demand for the billing cycle, best practices calls for a perpetual roll over of the kilowatt credits, although some regions have considered having any kilowatt credits expire after 36 months. The normal definition of excess generation is annually, although the term is equally applicable monthly. The treatment of annual excess generation (and monthly) ranges from lost, to compensation at avoided cost, to compensation at retail rate.[17] Left over kilowatt credits upon termination of service would ideally be paid at retail rate, from the consumer standpoint, and lost, from the utility standpoint, with avoided cost a minimum compromise. Some regions allow optional payment for excess annual generation,[18] which allows perpetual roll over or payment, at the customers choice. Both wind and solar are inherently seasonal, and it is highly likely to use up a surplus later, unless more solar panels or a larger wind turbine have been installed than needed.

Energy storage

Net metering systems can have energy storage integrated, to store some of the power locally (i.e. from the renewable energy source connected to the system) rather than selling everything back to the mains electricity grid. Often, the batteries used are industrial deep cycle batteries as these last for 10 to 20 years.[19] Lead-acid batteries are often also still used, but last much less long (5 years or so). Lithium-ion batteries are sometimes also used, but too have a relatively short lifespan. Finally, nickel-iron batteries[20] last the longest with a lifespan of up to 40 years.[21][22][23]

Australia

In some Australian states, the "feed-in tariff" is actually net metering, except that it pays monthly for net generation at a higher rate than retail, with Environment Victoria Campaigns Director Mark Wakeham calling it a "fake feed-in tariff".[24] A feed-in tariff requires a separate meter, and pays for all local generation at a preferential rate, while net metering requires only one meter. The financial differences are very substantial.

In Victoria, from 2009, householders were paid 60 cents for every excess kilowatt hour of energy fed back into the state electricity grid. This was around three times the retail price for electricity at that time. However, subsequent state governments reduced the feed-in in several updates, until in 2016 the feed-in is as low as 5 cents per kilowatt hour.

In Queensland starting in 2008, the Solar Bonus Scheme pays 44 cents for every excess kilowatt hour of energy fed back into the state electricity grid. This is around three times the current retail price for electricity.

Canada

Ontario allows net metering for up to 500 kW, however credits can only be carried for 12 consecutive months. Should a consumer establish a credit where they generate more than they consume for 8 months and use up the credits in the 10th month, then the 12-month period begins again from the date that the next credit is shown on an invoice. Any unused credits remaining at the end of 12 consecutive months of a consumer being in a credit situation are cleared at the end of that billing.[25]

Areas of British Columbia serviced by BC Hydro are allowed net metering for up to 50 kW. At each annual anniversary the customer was paid 8.16 cents[26] per KWh, if there is a net export of power after each 12-month period, which was increased to 9.99 cents/kWh, effective June 1, 2012. Systems over 50 kW are covered under the Standing Offer Program.[27][28] FortisBC which serves an area in South Central BC also allows net-metering for up to 50 kW. Customers are paid their existing retail rate for any net energy they produce.[29] The City of New Westminster, which has its own electrical utility, does not currently allow net metering.

New Brunswick allows net metering for installations up to 100 kW. Credits from excess generated power can be carried over until March at which time any excess credits are lost. [30]

SaskPower allows net metering for installations up to 100 kW. Credits from excess generated power can be carried over until the customer's annual anniversary date, at which time any excess credits are lost.

European Union

Denmark established net-metering for privately owned PV systems in mid-1998 for a pilot-period of four years. In 2002 the net-metering scheme was extended another four years up to end of 2006. Net-metering has proved to be a cheap, easy to administer and effective way of stimulating the deployment of PV in Denmark; however the relative short time window of the arrangement has so far prevented it from reaching its full potential. During the political negotiations in the fall of 2005 the net-metering for privately owned PV systems was made permanent.[31]

Italy offers a support scheme, mixing net-metering and a well segmented premium FiT.[32]

In 2010 Spain, net-metering has been proposed by the Asociación de la Industria Fotovoltaica (ASIF) to promote renewable electricity, without requiring additional economic support,[33] but net-metering for privately owned systems is not yet established.

Some form of net metering is now proposed by Électricité de France. According to their website, energy produced by home-owners is bought at a higher price than what is charged as consumers. Hence, some recommend to sell all energy produced, and buy back all energy needed at a lower price. The price has been fixed for 20 years by the government.[34][35]

United States

Growth of net metering in the United States

Net metering was pioneered in the United States as a way to allow solar and wind to provide electricity whenever available and allow use of that electricity whenever it was needed, beginning with utilities in Idaho in 1980, and in Arizona in 1981.[6] In 1983, Minnesota passed the first state net metering law.[5] As of March 2015, 44 states and Washington, D.C. have developed mandatory net metering rules for at least some utilities.[36]

Net metering policies are determined by states, which have set policies varying on a number of key dimensions. The Energy Policy Act of 2005 required state electricity regulators to "consider" (but not necessarily implement) rules that mandate public electric utilities make available upon request net metering to their customers.[37] Several legislative bills have been proposed to institute a federal standard limit on net metering. They range from H.R. 729, which sets a net metering cap at 2% of forecasted aggregate customer peak demand, to H.R. 1945 which has no aggregate cap, but does limit residential users to 10 kW, a low limit compared to many states, such as New Mexico, with an 80,000 kW limit, or states such as Arizona, Colorado, New Jersey, and Ohio which limit as a percentage of load.[38]

Arizona, California, Colorado, Connecticut, Delaware, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Ohio, Oregon, Pennsylvania, Utah, Vermont, and West Virginia are considered the most favorable states for net metering, as they are the only states to receive an "A" rating from Freeing the Grid in 2015.[39]

State Subscriber limit
(% of peak) 		Power limit
Res/Com(kW) 		Monthly
rollover 		Annual
compensation
Alabama no limit 100 yes, can be indefinitely varies
Alaska 1.5 25 yes, indefinitely retail rate
Arizona no limit 125% of load yes, avoided-cost at end of billing year avoided cost
Arkansas no limit 25/300 yes, until end of billing year retail rate
California 5 1,000 yes, can be indefinitely varies
Colorado no limit 120% of load or 10/25* yes, indefinitely varies*
Connecticut no limit 2,000 yes, avoided-cost at end of billing year retail rate
Delaware 5 25/500 or 2,000* yes, indefinitely retail rate
District of Columbia no limit 1,000 yes, indefinitely retail rate
Florida no limit 2,000 yes, avoided-cost at end of billing year retail rate
Georgia 0.2 10/100 no determined rate
Hawaii none [40] 50 or 100* yes, until end of billing year none[41]
Idaho 0.1 25 or 25/100* no retail rate or avoided-cost*
Illinois 1 40 yes, until end of billing year retail rate
Indiana 1 1000 yes, indefinitely retail rate
Iowa no limit 500 yes, indefinitely retail rate
Kansas 1 25/200 yes, until end of billing year retail rate
Kentucky 1 30 yes, indefinitely retail rate
Louisiana no limit 25/300 yes, indefinitely avoided cost
Maine no limit 100 or 660* yes, until end of billing year retail rate
Maryland 1500 MW 2,000 yes, until end of billing year retail rate
Massachusetts** 6 peak demand
4 private 5 public 		60, 1,000 or 2,000 varies varies
Michigan 0.75 150 yes, indefinitely partial retail rate
Minnesota no limit 40 no retail rate
Mississippi N/A N/A N/A N/A
Missouri 5 100 yes, until end of billing year avoided-cost
Montana no limit 50 yes, until end of billing year retail rate
Nebraska 1 25 yes, until end of billing year avoided-cost
Nevada 3 1,000 yes, indefinitely retail rate
New Hampshire 1 100 yes, indefinitely avoided-cost
New Jersey no limit previous years consumption yes, avoided-cost at end of billing year retail rate
New Mexico no limit 80,000 if under US$50 avoided-cost
New York 1 or 0.3 (wind) 10 to 2,000 or peak load varies avoided-cost or retail rate
North Carolina no limit 1000 yes, until summer billing season retail rate
North Dakota no limit 100 no avoided-cost
Ohio no limit no explicit limit yes, until end of billing year generation rate
Oklahoma no limit 100 or 25,000/year no avoided-cost, but utility not required to purchase
Oregon 0.5 or no limit* 10/25 or 25/2,000* yes, until end of billing year* varies
Pennsylvania no limit 50/3,000 or 5,000 yes, until end of billing year. "price-to-compare" (generation and transmission cost)
Rhode Island 2 1,650 for most, 2250 or 3500* optional slightly less than retail rate
South Carolina 0.2 20/100 yes, until summer billing season time-of-rate use or less
South Dakota N/A N/A N/A N/A
Tennessee N/A N/A N/A N/A
Texas*** no limit 20 or 25 no varies
Utah varies* 25/2,000 or 10* varies - credits expire annually with the March billing* avoided-cost or retail rate*
Vermont 15 250 yes, accumulated up to 12 months, rolling retail rate[42]
Virginia 1 10/500 yes, avoided-cost option at end of billing year retail rate
Washington 0.5 100 yes, until end of billing year retail rate
West Virginia 0.1 25 yes, up to twelve months retail rate
Wisconsin no limit 20 no retail rate for renewables, avoided-cost for non-renewables
Wyoming no limit 25 yes, avoided-cost at end of billing year retail rate

Note: Some additional minor variations not listed in this table may apply. N/A = Not available. Lost = Excess electricity credit or credit not claimed is granted to utility. Retail rate = Final sale price of electricity. Avoided-cost = "Wholesale" price of electricity (cost to the utility). * = Depending on utility. ** = Massachusetts distinguishes policies for different "classes" of systems. *** = Only available to customers of Austin Energy, CPS Energy, or Green Mountain Energy (Green Mountain Energy is not a utility but a retail electric provider; according to www.powertochoose.com).[43]

India

Indian states of Tamil Nadu, Karnataka, and Andhra Pradesh have started implementation of net metering, and the policy has been announced by the respective state electricity boards in 2014. Feasibility study will be done by the electricity boards, and after inspection the meters will be replaced by bidirectional ones and will be installed. Applications are taken up for up to 30% of the distribution transformer capacity on a first-come, first-served basis and technical feasibility.[44]

Net purchase and sale

Net purchase and sale is a different method of providing power to the electricity grid that does not offer the price symmetry of net metering, making this system a lot less profitable for home users of small renewable electricity systems.

Under this arrangement, two uni-directional meters are installed—one records electricity drawn from the grid, and the other records excess electricity generated and fed back into the grid. The user pays retail rate for the electricity they use, and the power provider purchases their excess generation at its avoided cost (wholesale rate). There may be a significant difference between the retail rate the user pays and the power provider's avoided cost.[45]

Germany, Spain, Ontario (Canada), some states in the USA, and other countries, on the other hand, have adopted a price schedule, or feed-in tariff (FIT), whereby customers get paid for any electricity they generate from renewable energy on their premises. The actual electricity being generated is counted on a separate meter, not just the surplus they feed back to the grid. In Germany, for the solar power generated, a feed-in tariff is being paid in order to boost solar power (figure from 2009). Germany once paid several times the retail rate for solar but has successfully reduced the rates drastically while actual installation of solar has grown exponentially at the same time due to installed cost reductions. Wind energy, in contrast, only receives around a half of the domestic retail rate, because the German system pays what each source costs (including a reasonable profit margin).

Related technology

Sources that produce direct current, such as solar panels must be coupled with an electrical inverter to convert the output to alternating current, for use with conventional appliances. The phase of the outgoing power must be synchronized with the grid, and a mechanism must be included to disconnect the feed in the event of grid failure. This is for safety – for example, workers repairing downed power lines must be protected from "downstream" sources, in addition to being disconnected from the main "upstream" distribution grid. Note: A small generator simply lacks the power to energize a loaded line. This can only happen if the line is isolated from other loads, and is extremely unlikely. Solar inverters are designed for safety – while one inverter could not energize a line, a thousand might. In addition, all electrical workers should treat every line as though it was live, even when they know it should be safe.[46][47]

Solar Guerrilla

Solar Guerrilla (or the guerrilla solar movement) is a term originated by Home Power Magazine and is applied to someone who uses an alternative energy source to illegally supply electricity back to a public utility grid.[48]

See also

References

  1. ↑ ferc.gov
  2. ↑ Electric bills contain a connection fee and an energy fee based on the number of kilowatt hours used that month. When no kilowatt hours are used the monthly connection fee is still paid. When the meter turns backwards for the month, the negative kilowatt reading is rolled over to the next month.
  3. ↑ Net energy metering uses bi-directional meter
  4. ↑ "Net Metering is a Win-Win for Utilities and Local Communities". Cres-energy.org. Retrieved 2013-12-15.
  5. 1 2 "Minnesota". Dsireusa.org. Retrieved 2013-12-15.
  6. 1 2 "Current Experience With Net Metering Programs (1998)" (PDF). Retrieved 2013-12-15.
  7. ↑ "Net Metering Map" (PDF). Retrieved 2013-12-15.
  8. ↑ "SolarNet and Net Metering" (PDF). Retrieved 2013-12-15.
  9. ↑ Tiglao, Dart. "Net Metering Website - 1. How net-metering works: Understanding the basics of policy, regulation and standards". www.doe.gov.ph. Retrieved 2015-06-01.
  10. ↑ eei.org
  11. ↑ renewableenergyworld.com
  12. ↑ oursolarrights.org
  13. ↑ votesolar.org
  14. 1 2 cpuc.ca.gov
  15. ↑ "How solar subsidies can distort the power market: the case of Italy". Europeanenergyreview.eu. Retrieved 2013-12-15.
  16. ↑ "12,000 MW of Renewable Distributed Generation by 2020" (PDF). Retrieved 2013-12-15.
  17. ↑ "Net Metering". Dsireusa.org. Retrieved 2013-12-15.
  18. ↑ Colorado, Delaware, Minnesota, New Mexico, and Virginia allow optional annual payment for excess generation.
  19. ↑ Deep cycle battery lifespan
  20. ↑ Nickel iron batteries having 40 year lifespan
  21. ↑ Nickel-iron batteries used in net metering system ref 1
  22. ↑ Nickel-iron batteries used in net metering system ref 2
  23. ↑ Nickel-iron batteries used in net metering system ref 3
  24. ↑ "Solar feed-in tariff meets with mixed reviews". Metering.com. Retrieved 2013-12-15.
  25. ↑ "Net Metering in Ontario" (PDF). Archived from the original (PDF) on 18 March 2009.
  26. ↑ Final Submissions of BC Hydro
  27. ↑ Net Metering Program Retrieved 15 April 2013
  28. ↑ "Standing Offer Program › Who Can Apply". Bchydro.com. 2012-11-30. Retrieved 2013-12-15.
  29. ↑ FortisBC: Net metering program Retrieved 15 April 2013
  30. ↑ "Net Metering". Nbpower.com. Retrieved 2013-12-15.
  31. ↑ "Denmark PV Technology Status and Prospects" (PDF). Archived from the original (PDF) on 8 September 2008.
  32. ↑ "2013 Global Market Outlook for Photovoltaics until 2013" (PDF). Retrieved 2013-12-15.
  33. ↑ "Country Focus: Spain". Archived from the original on 25 February 2010.
  34. ↑ Je passe aux énergies renouvelables (in French)
  35. ↑ Devenez producteur d'électricité (in French)
  36. ↑ "Net Metering" (PDF). ncsolarcen-prod.s3.amazonaws.com. North Carolina Clean Energy Technology Center. 2015-03-01. Retrieved 2015-05-30.
  37. ↑ "Public Utility Regulatory Policies Act of 1978 (PURPA)". U.S. Department of Energy. Retrieved May 30, 2015.
  38. ↑ "Database of State Incentives for Renewables & Efficiency". North Carolina Clean Energy Technology Center. Retrieved 2015-05-31.
  39. ↑ "Best and Worst Practices in State Net Metering Policies and Interconnection Procedures". Freeing the Grid. Retrieved 2015-05-31.
  40. ↑ "HECO Net Metering". Heco.com. 2011-12-23. Retrieved 2013-12-15.
  41. ↑ "Hawaii Revised Statutes 269-106". Lawserver.com. Retrieved 2013-12-15.
  42. ↑ http://publicservice.vermont.gov/topics/renewable_energy/net_metering
  43. ↑ Database of State Incentives for Renewables & Efficiency
  44. ↑ "Net Metering India" (PDF). Tamilnadu TNERC.
  45. ↑ "EERE Consumer's Guide: Metering and Rate Arrangements for Grid-Connected Systems". U.S. Department of Energy. September 12, 2005. Retrieved 23 January 2006.
  46. ↑ "Know the Ground Rules for Electrical Safety". Statefundca.com. Retrieved 2013-12-15.
  47. ↑ Electrical Safety: Lineman Electrocuted after Reportedly Violating the “Hot Gloves” Rule Archived September 11, 2011 at the Wayback Machine
  48. ↑ "Guerrilla Solar". Retrieved 2007-07-16.
This article is issued from Wikipedia - version of the Thursday, January 28, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.