Muddy flood

Muddy flood occurring in Chaumont-Gistoux, Belgium

A muddy flood is produced by an accumulation of run-off over agricultural land . Sediments are picked up by the run-off and carried as suspended matter or bed-load. Muddy floods are typically a hill-slope process, and should not be confused with mudflows produced by mass movements.

Muddy floods can damage the road infrastructure and may deposit layers of mud blanket and may also clog sewers and damage private property.

It has been referred to 'muddy floods' since the 1980s.[1] A similar designation appeared in French ('inondations boueuses'[2]) during the same period.

Muddy flood generation

Difference of soil cover by vegetation for two crops (winter wheat vs. maize) at the end of May, in central Belgium

Muddy runoff is generated on agricultural land when the soil surface is exposed or sparsely covered by vegetation. Large quantities of run-off usually generated by heavy storms is needed to start such a flood.[3]

Muddy flood occurrence

Muddy floods have been observed in the entire European loess belt. Other affected areas include Normandy and Picardy (France), central Belgium and southern Limburg, the Netherlands.

Muddy floods have also been observed in Slovakia and Poland.

Temporal evolution

An increase in muddy flood frequency has been observed during the last twenty years (e.g. in central Belgium,[4]). This increase in their frequency may be due to a number of factors including:

Control measures

Grassed waterway during a beautiful day in Velm, Belgium
Grassed waterway in Velm, Belgium, after a thunderstorm

Preventive measures consist in limiting runoff generation and sediment production at the source. Alternative farming practices (e.g. reduced tillage) to increase runoff infiltration and limit erosion in their fields may assist.

Curative measures generally consist in installing retention ponds at the boundary between cropland and inhabited areas.[5]

An alternative is to apply other measures than can be referred to as intermediate measures. Grass buffer strips along or within fields, a grassed waterway (in the thalwegs of dry valleys) or earthen dams are good examples of this type of measures. They act as a buffer within landscape, retaining runoff temporarily and trapping sediments.[6]

Implementation of these measures is best coordinated at the catchment scale.

See also

References

  1. Boardman, J. (1984). Soil erosion and flooding on downland areas. The Surveyor, 164, 8-11.
  2. Auzet, A.V. (1987). L'érosion des sols cultivés en France sous l'action du ruissellement. Annales de Géographie, 537, 529-555.
  3. Evrard, O., Vandaele, K., Bielders, C.L., van Wesemael, B. (2008). Seasonal evolution of runoff generation on agricultural land in the Belgian loess belt and implications for muddy flood triggering. Earth Surface Processes & Landforms 33(8), 1285-1301.
  4. Evrard, O., Bielders, C., Vandaele, K., van Wesemael, B. (2007). Spatial and temporal variation of muddy floods in central Belgium, off-site impacts and potential control measures. Catena 70 (3), 443-454.
  5. Verstraeten, G., Poesen, J., (2001). The nature of small-scale flooding, muddy floods and retention pond sedimentation in central Belgium. Geomorphology, 29, 275–292.
  6. Evrard, O., Vandaele, K., van Wesemael, B., Bielders, C.L, 2008. A grassed waterway and earthen dams to control muddy floods from a cultivated catchment of the Belgian loess belt. Geomorphology 100, 419-428.
This article is issued from Wikipedia - version of the Wednesday, July 02, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.