Midland Railway Clowne Branch

The Clowne Branch is a lifted but protected former railway line in north eastern Derbyshire, England.

Midland Railway Clowne and Doe Lea Branches

Legend
Key
Open ex-MR Lines
Closed ex-MR Lines
ex-LNER Lines
Clowne Branch
through Clowne & Barlborough

Doe Lea Branch
through Glapwell

-----------------
Context
ex-MR "Old Road"
to Rotherham Masborough

ex-GCML
to Sheffield Victoria

Robin Hood Line
to Worksop

Whitwell
Clowne & Barlborough
Creswell
Whittington & Barrow Hill
Staveley Central & Town
Langwith Whaley Thorns
MML
to Sheffield

Langwith
Chesterfield
Bolsover Castle Station
Shirebrook
Palterton and Sutton
MML
to Derby

Glapwell
Rowthorn Tunnel
Rowthorn and Hardwick
Pleasley West
Mansfield Woodhouse
to Teversall Manor
Mansfield
Robin Hood Line
to Nottingham (Midland)

----------------
Detail
ex-GCML
to Sheffield Victoria

ex-LD&ECR
to Spinkhill

Robin Hood Line
to Worksop

Whitwell
Barlborough Colliery
Southgate Colliery
Clowne & Barlborough
Clowne South
Elmton & Creswell
Creswell & Welbeck
ex-LD&ECR
to Shirebrook North

Hartington Colliery
Bell House Sidings
to Barrow Hill
Staveley Central & Town
Oxcroft Colliery/DP
Seymour Colliery
Seymour Junction
Ireland Colliery
Markham Colliery/Vale
Coalite & Chemicals
Bolsover Colliery
Bolsover Castle Station
Bolsover South
ex-LD&ECR
to Shirebrook North

Byron Bricks
Palterton & Sutton
Ramcroft Colliery
Glapwell Colliery
Glapwell
ex-GNR
to Shirebrook North

Rowthorn Tunnel
Rowthorn & Hardwick
Pleasley West & East
Pleasley Colliery
Mansfield Woodhouse
to Teversall Manor
Mansfield
Robin Hood Line
to Nottingham (Midland)

ex-GNR
to Nottingham Victoria

Construction

The Mansfield Lines Act of 8 July 1865 authorised the construction of the branch,[1] along with others in the area which was undergoing rapid industrialisation, especially in the coal and iron industries.

The 5.75 miles (9.25 km) line was built by the Midland Railway from Seymour Junction[2][3][4] on their Doe Lea Valley line to Creswell Junction,[5][6] immediately north of Elmton and Creswell on their Nottingham to Worksop line, now known as the Robin Hood Line. It was physically completed by January 1872, but not opened throughout until 1 June 1875 and then only for freight, the sole traffic up to that point being coal from Barlborough Colliery.

The branch served three collieries - Oxcroft, Barlborough and Southgate[7][8] - and one station, initially called Clown ("e" was only added to the village and its railway features in the 20th Century) but was later renamed twice, becoming Clowne and Barlborough in 1951. The primary purpose of the line was to give access from the east to the booming coal and iron industries in the Staveley area.

The line was steeply graded from both ends to its summit at Clowne. It had no tunnels, but required three substantial cuttings and a 70 feet (21 m) embankment. Further significant work occurred in the late 1960s when it was bridged by the new M1 Motorway.[9]

Between 1896 and 1900 the LD&ECR built their Beighton Branch which both adjoined and crossed the Clowne Branch in Clowne. Relations between the Midland Railway and the new company were good. A connection was laid between the two lines in Clowne, running north west to south east, some distance east of both companies' stations. It was only ever used for freight and closed in 1937[10]

The line has the Engineer's Line Reference (ELR) BAC3.[11] Codes beginning "BAC3" appear on structures such as bridges which remain Network Rail's responsibility, even though tracks have been lifted.

Passenger services

Passenger services commenced on 1 November 1888, thirteen years after opening and sixteen years after physical completion. Three trains a day plied between Mansfield and Chesterfield, calling at all stations via Elmton and Creswell, Clown, Netherthorpe, Staveley and Whittington. A common thread between these stations is that every one of them was subsequently renamed at least once or, in the case of Whittington, relocated. The time taken for this sinuous 21 miles (34 km) journey was about an hour.[12]

By 1922 five trains a day, Monday to Saturday, plied the route, [13] but this was the high-water mark. By 1952 only one train each way, Monday to Friday, served Clowne and Barlborough, timed to suit schools. That was withdrawn on 5 July 1954.[14] The station's goods facilities closed in July 1960, leaving its sole purpose excursions, such as for football matches, and Summer Saturday holiday traffic, notably from Radford to Blackpool North. That called for the last time on 18 August 1962.[15]

The last steam train to use the line was a non-stop enthusiasts' special on 16 October 1965.[16][17] This train also traversed the Doe Lea Branch.

Freight

Freight was always the line's primary purpose. Barlborough Colliery ceased production in 1921 and Southgate followed in 1929.

Oxcroft Colliery, at Stanfree, survived until 27 February 1976.[18] After it closed its facilities for loading coal onto trains were retained and developed as the "Oxcroft Disposal Point"[19] for opencasted coal. The site had something of a Red Letter Day on 9 May 1992 when Class 58 locomotive 58 044 was ceremonially named "Oxcroft Opencast".[20]

The site continued in railway use until Spring 2006, latterly to load coal opencasted from Arkwright colliery and brought to Oxcroft by road. This coal came off the short Oxcroft Branch at Oxcroft Colliery Branch Junction and traversed the Clowne branch for less than a mile to Seymour Junction, heading westwards.[21] The track and loading equipment at Oxcroft DP was protected for some time, but by 20 July 2013 the track had been lifted and all structures had been demolished, though no attempt had been made to landscape the site or remove roadways.

Otherwise light engine movements to and from Shirebrook Diesel Depot became the sole regular through traffic, supplemented by occasional freights and power station coal diversions.[22] This continued until the 1990s when an underground fire threatened to undermine the line, compounded by the expensive need to replace the points at Creswell Junction. These points were replaced by plain line, as were those at Oxcroft Colliery Junction. Superb images of the area are available on line[23] but note that, as the aerial view on the site shows, "Oxcroft Colliery No 3" signalbox was near Barlborough Colliery, not Oxcroft Colliery.

At 20 July 2013 the track between Oxcroft and Creswell had been lifted and piles of concrete sleepers had been placed beneath overbridges in Clowne and Woodthorpe Road (between Shuttlewood and Mastin Moor) to deter wheeled access. Structures such as overbridges had clearly been maintained. The route remains protected from breach or encroachment.

Possible Future

The line from Foxlow Junction through Hall Lane Junction to Seymour Junction and Oxcroft Disposal Point has been mothballed as there remains the possibility of opencasting in the area. For example, in 2005 UK Coal (now Coalfield Resources), expressed an interest in extracting c530,000 tons near Mastin Moor.[24]

The Doe Lea line South from Seymour Junction to Bolsover (now known as "The Bolsover Branch") has been mothballed as it runs through the new Markham Vale Enterprise Zone at M1 Junction 29A.[25] It is hoped that someone will invest in this infrastructure to create road-rail interchange facilities. The Clowne Branch has not been removed or breached as it, too, might provide access to Markham Vale from a different direction.

A further possibility for the line, mooted by Derbyshire County Council should railway use come to nought, is to use the trackbed for community access and off-road leisure travel.

References

Notes

Sources

External links

Other Reading

This article is issued from Wikipedia - version of the Sunday, January 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.