Melzer's reagent

Melzer's reagent (also known as Melzer's solution or informally as Melzer's) is a chemical reagent used by mycologists to assist with the identification of fungi.

Composition

Melzer's reagent is an aqueous solution of chloral hydrate, potassium iodide, and iodine. Depending on the formulation, it consists of approximately 2.50-3.75% potassium iodide and 0.75–1.25% iodine, with the remainder of the solution being 50% water and 50% chloral hydrate.[1][2] Melzer's is toxic to humans if ingested due to the presence of iodine and chloral hydrate.[3] Due to the legal status of Chloral hydrate, Melzer's reagent is difficult to obtain. To cope with the problems procuring chloral hydrate, Rutgers scientists have developed a working substitute for use in Microscopy known as Visikol™,[4] which is compatible with Lugol's iodine, forming a suitable modern replacement for Melzer's.

Melzer's reagent is part of a class of iodine/potassium iodide (IKI)-containing reagents used in biology; Lugol's iodine is another such formula.

Reactions

Melzer's is used by exposing fungal tissue or cells to the reagent, typically in a microscope slide preparation, and looking for any of three color reactions:

Among the amyloid reaction, two types can be distinguished:

Melzer's reactions are typically almost immediate, though in some cases the reaction may take up to 20 minutes to develop.[1]

The function of the chemicals that make up Melzer's reagent are several. The chloral hydrate is a clearing agent, bleaching and improving the transparency of various dark-colored microscopic materials. The potassium iodide is used to improve the solubility of the iodine, which is otherwise only semi-soluble in water. Iodine is thought to be the main active staining agent in Melzer's; it is thought to react with starch-like polysaccharides in the cell walls of amyloid material, however, its mechanism of action is not entirely understood. It has been observed that hemiamyloid material reacts differently when exposed to Melzer's than it does when exposed to other IKI solutions such as Lugol's, and that in some cases an amyloid reaction is shown in material that had prior exposure to KOH, but an inamyloid reaction without such pretreatment.[5][6]

An experiment in which spores from 35 species of basidiomycetes were tested for reactions to both Melzer's and Lugol's showed that spores in a large percentage of the species tested display very different reactions between the two reagents. These varied from being weakly or non-reactive in Lugols, to giving iodine-positive reactions in Lugol's but not in Melzer's, to even giving dextrinoid reactions in Lugol's while giving amyloid reactions in Melzer's.[3]

Melzer's degrades into a cloudy precipitate when combined with alkaline solutions,[1] hence it cannot be used in combination or in direct series with such common mycological reagents such as potassium hydroxide or ammonium hydroxide solutions. When potassium hydroxide is used as a pretreatment, the alkalinity must be first neutralized before adding Melzer's.

History

The use of iodine-containing solutions as an aid to describing and identifying fungi dates back to the mid-19th century.[3]

Melzer's reagent was first described in 1924 and takes its name from its inventor, the mycologist Václav Melzer, who modified an older chloral hydrate-containing IKI solution developed by botanist Arthur Meyer.[5] Melzer was a specialist in Russula, a genus in which the amyloidy on the spore ornamentation or entire spore is of great taxonomic significance.[7]

References

  1. 1 2 3 4 Largent D, et al. 1977. How to Identify Mushrooms to Genus III: Microscopic Features. Arcata, CA: Mad River Press. ISBN 0-916422-09-7. p 25–26.
  2. ↑ Miller OK, Miller H. 2006. North American Mushrooms: A Field Guide to Edible and Inedible Fungi. Guilford, CT: Falcon Guide. ISBN 0-7627-3109-5. p 549.
  3. 1 2 3 Leonard LM. 2006. Melzer's, Lugol's, or iodine for identification of white-spored Agaricales? McIlvainea 16(1):43–51.
  4. ↑ http://otc.rutgers.edu/pdf/Simon-2012-146.pdf
  5. 1 2 3 Baral H-O. 1987. Lugol's solution/IKI versus Melzer's reagent: Hemiamyloidity, a universal feature of the ascus wall. Mycotaxon 29:399–450.
  6. ↑ Kohn LM, Korf RP. 1975. Variation in ascomycete iodine reactions: KOH pretreatment explored. Mycotaxon 3:165–172.
  7. ↑ The Russulales News Team. 2007. Introduction to the Russulales: Characteristics of the russuloid fungi, Russulales News (website).

Further reading

This article is issued from Wikipedia - version of the Friday, February 20, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.