Marlin Model 336

Marlin Model 336

Marlin 336W in .30-30 Winchester
Type Lever-action rifle or carbine
Place of origin  United States
Production history
Designer L.L. Hepburn, T.R. Robinson Jr.
Designed 1948 to present
Manufacturer Marlin Firearms (until 2010), Remington Arms (current production)
Variants currently: Deluxe, BL, C, C Limited, SS, W
Specifications
Weight 7 lbs (3.18 kg)
Length 38.5" (97 cm), 42.25" (108 cm)
Barrel length 20" (508mm), 24" (610mm)

Cartridge Current Offerings (Nov. 29, 2014)
.30-30 Winchester, .35 Remington
No Longer Offered:
.219 Zipper, .32 Special, .44 Magnum, .410 bore
Model 1895 Chamberings:
.45-70, .444 Marlin, .450 Marlin
Model 1894 Chamberings:
.38 Special/.357 Magnum, .44 Special/.44 Magnum, .45 Colt
Barrels 18-24 .in
Action Lever action
Feed system tubular magazine (capacity varies)
Sights iron sights, optional telescopic, integral 1913 rail on some models

The Marlin Model 336 is a lever-action sporting rifle and carbine made by Marlin Firearms. Since its introduction in 1948, it has been offered in a number of different calibers and barrel lengths, but is commonly chambered in .30-30 Winchester or .35 Remington, using a 20- or 24-inch barrel. Currently, the model with a 24-inch barrel is only available in .30-30 Winchester. The Model 336 is currently produced by Remington Arms.

History

The Model 336 is a direct development of the Marlin Model 1893 rifle which was produced from 1893 to 1936.[1][2] Based on the patents of L.L. Hepburn, the Model 1893 incorporated a new locking bolt system and a two-piece firing pin.[2] In 1936, with only minor changes to the stock, forearm, and sights, the Model 1893 was redesignated the Model 1936 (soon renamed the Model 36).[2] All of these firearms featured a solid-top receiver made of forged steel and incorporated side ejection of fired cartridges.[2] Compared to the Winchester 94, then the predominant lever-action hunting rifle, the Model 36 was somewhat heavier with a simpler internal mechanism and a full pistol grip-type buttstock in contrast to the Winchester 94's straight grip stock.

In 1948, the Model 36 was replaced by the Model 336, which incorporated the patents of Thomas R. Robinson, Jr., a Marlin employee.[2] Sold under both the Marlin and Glenfield brands, the Model 336 has been in continuous production from 1948 to the present day, and is currently produced by Remington Firearms under the Marlin brand.

While most current variants of the Model 336 feature a full pistol-grip walnut stock, 20 inch barrel and full length tube magazine, other versions of the 336 have been frequently offered by Marlin over the years, including barrel lengths of 16.25-inch, 18-inch, 22-inch and 24-inch barrels, half-length magazines, and models with straight grips and/or hardwood (birch) stocks.[2]

Design

An evolution of the Model 36 rifle, the Model 336 is easily distinguished from its predecessors by its open ejection port machined into the side of the receiver. Design improvements include a stronger and simpler round-profile chrome-plated breech bolt, a redesigned cartridge carrier, an improved extractor,[3] and coil-type main and trigger springs in place of the flat springs used in earlier Marlin rifles.[2] Like its predecessors, the receiver and all major working parts of the Model 336 are constructed of steel forgings.[2]

With its solid, flat top receiver and side ejection of fired cartridges, the Marlin 336 is prime candidate for use with a rifle scope. In 1956, Marlin also incorporated its proprietary Micro-Groove rifling system into the Model 336 and other centerfire Marlin rifles.[2] This rifling system, which used an increased number of relatively shallow rifling grooves, cut down production time and significantly extended the service life of machine tooling.[4] According to Marlin, the Micro-Groove system provides very uniform bore dimensions and a very smooth bore finish designed to improve accuracy, prevent gas leakage, and reduce bore fouling.[4]

The Model 336 is designed to be easily disassembled for cleaning. Removal of the lever pivot screw with a flathead screwdriver, allows field stripping of the lever arm, bolt, and ejector for maintenance.[2] Unlike many lever action designs, the Model 336 can be cleaned from the breech, much like a bolt-action rifle.[2] This in turn avoids damage to the muzzle caused by cleaning rods and tools.

Production

The Model 336 is ranked the #2 all-time leader in U.S. high-powered sporting rifle sales, after the Winchester Model 1894.[5] Since 1948, over 6 million Model 336 rifles have been produced.

Other models based on the Model S336 action

This 30-30 Cal. Marlin rifle is engraved with scenes from American history commemorating America’s Bicentennial.

Marauder, Trapper, Model 336Y
Marlin has made short carbine versions of the Model 336 over the years, including the Model 336 Marauder, Trapper and the Model 336Y (Y standing for "Youth Model"). Usually featuring a short 16- or 18-inch barrel, these carbines are considerably shorter and lighter than the standard 20" carbine. The Model 336Y also featured a short buttstock to enable use by younger shooters.
The Glenfield
For many years, Marlin produced a less-expensive Glenfield line of Model 336 rifles for retail at mass merchandise and department stores including J.C. Penney Sears, Roebuck & Company, Western Auto, K-Mart and Wal-Mart. Marlin sold these rifles as the Glenfield Models 30, 30A, 30AS or 30AW. Other Model 336 production rifles were stamped with names chosen by the retailer, such as the J.C. Higgins (Sears) Model 45 and Model 50, the Montgomery Ward Western Field Model 740-A EMN, the J.C. Penney Foremost Model 3040, and the K-Mart Model 30TK. Mechanically identical to the Model 336, these mass market rifles were typically fitted with lower-cost hardwood (birch) stocks and forearms, and some metal finishing operations were eliminated in the interest of lowering unit cost.[2] By marketing a less-expensive version of the same rifle under a different name to mass merchandising stores, Marlin protected its customer base of small specialty gun dealers.[2]
Store Brand Models:
By 1983, most of Marlin's mass merchandise retailers were in a position to insist on name-brand firearms, and the Glenfield line was dropped. However, Marlin continued to offer a less expensive version of the Model 336, variously called the Model 336W or Model 30AW, originally sold only to the Wal-Mart chain. Fitted with a hardwood stock and lower-cost sights, these rifles were frequently offered as part of a special package with an inexpensive rifle scope, sling, or other options. The Marlin Model 30AW package included a 3-9x32 factory-mounted scope and padded sling, but was otherwise identical to the Marlin Model 336W.[6]
XLR Series:
Marlin also offers an XLR line of rifles in several calibers, all based on the Model 336 lever action design. The Model 336XLR features stainless construction, a 24-inch barrel, and a grey/black wood laminate stock.
Model 336SS
The Model 336M, a Model 336 carbine made largely of stainless steel, was introduced in 2000. It was replaced a year later by the Model 336SS, a 20" carbine offered only in .30-30 caliber. The Model 336SS features a forged stainless steel receiver, barrel, lever, and trigger. The magazine tube, springs, and loading gate are also fabricated from stainless, while other metal parts are nickel-plated steel.

Model 444

Introduced in 1965, the Model 444 Marlin uses the Model 336 lever action mechanism, including the signature open ejection port machined into the side of the receiver, but is chambered for the .444 Marlin cartridge.[2] At its introduction, the Model 444 was the most powerful lever action rifle on the market.[2] With a muzzle energy of more than 3000 ft/lb, the Model 444 was intended for the largest North American game animals.[2] The Model 444 holds 4 cartridges in the magazine and one in the chamber, and was originally fitted with a 24-inch barrel and a straight grip buttstock.[2]

Early Model 444 rifles utilized a 1 in 38" rifling twist and were handicapped by a lack of suitable bullet weights. In addition, nearly all existing bullets for the .444 had been originally designed solely for use in handguns; used in the Model 444, the bullets tended to break up at higher rifle velocities. A new 265-grain bullet greatly improved the utility of the Model 444 as a hunting rifle, and other bullet weights have since been introduced. In 1971, Model 444's barrel length was reduced to 22 inches, and the rifle's buttstock was changed to a full pistol-grip design.[2] Later production rifles received a change in barrel twist to 1 in 20 inches to stabilize longer and heavier bullets.[2]

Model 1894

Main article: Marlin Model 1894

In 1963, Marlin added the .44 Magnum cartridge as an optional chambering in the Model 336T carbine, which featured a straight grip, a 20-inch round tapered barrel, and a full-length magazine. However, the rifle experienced continuing problems in loading and chambering the short .44 Magnum cartridge, and in 1964 Marlin abruptly dropped the .44 Magnum option.[2]

Marlin was well aware of continued demand for a lever-action carbine in .44 Magnum caliber, and began searching for a replacement. In 1969, Marlin introduced the New Model 1894 in .44 Magnum/.44 Special caliber.[2] The New Model 1894 is not based on the Model 336 mechanism, instead, it uses the old short-receiver Model 1894 action incorporating the flat-profile bolt, which received minor improvements before being reintroduced in .44 Magnum caliber.[2] The decision to use the original Model 1894 action, a design originally designed to accommodate pistol-length cartridges such as the .38-40 and .44-40, proved a complete success.[2] In keeping with its predecessor, the New Model 1894 was given a straight grip buttstock instead of the pistol-grip style version fitted to the Model 336.[2] Since 1979, other calibers have been introduced for the Model 1894, including .38 Special/.357 Magnum, .41 Magnum, and the .45 Long Colt under the Models 1894C, 1894S, and 1894CS.[2] A cross-bolt safety was added in 1984.[2] The Model 1894 is particularly popular with cowboy action shooting enthusiasts, as well as shooters who desire to carry a shoulder arm and a revolver in the same caliber.

Model 1895

Introduced in 1972 and named in honor of the Marlin Model of 1895 (produced from 1895–1917), the current (New) Model 1895 rifle offered in .45-70 caliber utilizes the same Model 336 receiver design and lever action mechanism used in the Marlin Model 444.[2][7][8] The New Model 1895 is also available in the more modern .338 Marlin Express.[9]

.450 Marlin

The .45-70 was originally a black powder cartridge and most factory ammo is loaded moderately for safety in older rifles, including the original Model of 1895. With increasing numbers of modern .45-70 rifles built with high strength actions (including the current Model 1895, the Ruger No. 1 single shot, the Browning BLR or the Siamese Mauser conversions), handloaders and specialty ammunition makers like Hornady, Buffalo Bore and Garrett produce high intensity .45-70 loadings that may equal or exceed the power of the .444 Marlin. Some approach the power of the .458 Winchester Magnum and are effective against dangerous game up to and including elephants.[8] Use of such loadings in older .45-70 firearms is dangerous and should not be attempted; for that reason, Marlin introduced the .450 Marlin, a belted version of the .45-70 cartridge that will not chamber in older .45-70 rifles. However, many .45-70 Model 1895 owners chose to use the traditional .45-70 loads for deer-sized game with the option of using the high intensity .45-70 loads for more dangerous game. The 1895M lever-action rifle chambered in .450 Marlin was offered from 2000 until 2009 and is no longer in production.

Guide Guns

One recent innovation growing in popularity is the "Guide Gun" concept. The name most probably originates from the types of longarms favored by Alaskan hunting and wilderness guides as a defense against attacks by bears. The Guide Gun concept consists of a handy, short-barreled (usually 16-19") lever action in a large caliber such as .45-70 or .450 Marlin with a 3/4 length magazine tube. Usually custom-made by a skilled gunsmith, these guns are usually fitted with either open sights (such as ghost rings or express sights), a reflex sight, holographic sight or a long eye-relief scope mounted on a scout rail. Marlin New Model 1895 actions are frequently used to build this type of firearm. In an attempt to capitalize on this trend, Marlin began offering custom versions of their New Model 1895 action beginning with the now-discontinued Models 1895SDT and 336SDT. Current "Guide Gun" models include the Models 1895G, 1895GS, and 1895SBL.

Conversions

Aside from existing Marlin models, the basic Model 336/Model 1895 receiver and lever action mechanism has enjoyed some popularity as a platform for various wildcat caliber conversions. These custom rifles are increasingly popular in the western United States, Canada, and Alaska where encounters with grizzly bears and other potentially dangerous animals can be expected. Some of these wildcat cartridge conversions include the .450 Alaskan, .457 Wild West Magnum, .50 Alaskan, and the .510 Kodiak Express.

Of the conversions mentioned both the .450 Alaskan and the .457 Wild West Magnum do not require new barrels, but simply a chamber reaming and the required action modifications (referred to as "action lengthening"); the .457 magnum also allows continued ability to use .45-70. The .510 Kodiak Express is the most powerful wildcat conversion available for the Marlin at 5,000+ ft-lbs.[10] Both the .50 Alaskan and .510 Kodiak Express require a new barrel to be installed on the rifle.

The .45-90 Sharps (also called .45-90 WCF or simply .45-90) has occasionally been used in converted Marlin 1895 rifles. The .45-90 conversion involves modifications to the action that increase the bolt travel and action timing (to adjust when a round is ejected, and when a new round lifts to enter the chamber), and the chamber in the barrel is reamed to .45-90 specifications. The case of a .45-90 is more than a quarter inch longer than the .45-70. The limitations on bolt travel of a converted Model 336 rifles are generally limit its case overall length (COL) to 2.85 inches. The 2.85 COL allows all bullets that work with the .45-70 action to be used in the converted .45-90. The .45-90 converted 1895 actions have the same pressure limitations as the .45-70 actions.

Marlin 336 Year of Manufacture

The following table can be used to date the year of manufacture of a Marlin 336. It is also valid for determining most other Marlin firearm build dates from 1946 to the present.

Marlin year of manufacture maybe determined from the following table of letter/numeral prefixs to the serial number:

Date Prefix(s)
1946 C
1947 D
1948 E
1949 F
1950 G
1951 H
1952 J
1953 K
1954 L
1955 M
Date Prefix(s)
1956 N
1957 P
1958 R
1959 S
1960 T
1961 U
1962 V
1963 W
1964 Y, Z
1965 AA
Date Prefix(s)
1966 AB
1967 AC
1968 AD, 68
1969 69
1970 70
1971 71
1972 72

Starting in 1973, the year of manufacture can be determined by subtracting the first two digits of the serial number from 100: Example: SN 2512345 would have been made in 1975 [100 - 25 = 75].

See also

References

  1. van Zwoll, Wayne. "A Lever Rifle's Lineage". Rifle Shooter. Petersens. Retrieved 18 October 2010.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Brophy, William S., Marlin Firearms: A History of the Guns and the Company That Made Them, Stackpole Books, ISBN 0811708772 (1989), pp. 193, 210, 216-221, 243, 252-267
  3. United States Patent Office, U.S. Patent No. 2,465,553, Application February 27, 1946: The extractor was designed by Thomas R. Robinson, Jr., a Marlin employee.
  4. 1 2 Fryxell, Glen E., Marlin's Micro Groove Barrels
  5. Harold Murtz, ed. Gun Digest Treasury (DBI Books, 1994), p.190
  6. http://www.marlinfirearms.com/Firearms/centerfire/336W.asp Model 336W  Also Available with Mounted Scope
  7. Hornady (2003). "Hornady Handbook of Cartridge Reloading". vol I (6th Edition ed.). Hornady Mfg Co. p. 586.
  8. 1 2 Metcalf, Dick, Marlin’s Newest .45-70: The Model 1895SBL Shooting Times, 23 September 2010
  9. van Zwoll, Wayne. "All Aboard the .338 Marlin Express". Rifle Shooter. Petersen's. Retrieved 18 October 2010.
  10. McPherson, M.L. (November 2008). "The .510 Kodiak Express the 5,000 foot-pound Marlin". Guns Magazine. Retrieved 18 October 2010.

External links

This article is issued from Wikipedia - version of the Wednesday, February 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.