MICTOR

MICTOR is an acronym for Matched Impedance ConnecTOR, a product line of vertical board to board connectors. Produced by TE Connectivity, they are attached to printed circuit boards using surface-mount technology. They can be used for probing boards.

MICTOR are used in HP and Tektronix logic analyzers.[1]

Connectors can be used even for very-high frequency applications, up to 100-ps rise time.[2]

Some of Mictor signals can be used for JTAG, e.g. in FPGA debugging variants of the connector.[3] Along with JTAG, Mictor connectors can also carry hardware trace signals like ARM CoreSight ETM (Embedded Trace Macrocell) or PTM (Program Trace Macrocell). [4]

Minimal variant of MICTOR consists of 38 signal positions; larger variants are designed up to 266 signals (with 38 increments). Connector is usually surface mounted.

References

  1. ↑ Jack G. Ganssle, The Art of Designing Embedded Systems, page 158
  2. ↑ Microelectronics Packaging Handbook: Subsystem packaging, page III-439
  3. ↑ Deep Memory Yields Effective In-System Debugging // XCell, 2002
  4. ↑ Lauterbach's ARM Connector Specification p. 18

External links

...........

This article is issued from Wikipedia - version of the Thursday, December 17, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.